Reviews Motor Driver With I2c

KEYESTUDIO Starter Kit V2 for Arduino with RJ11 Connector, Great STEM Education Kit for Students, Teachers and Hardware Enthusiast

  • Whenever you and your family go for vacations, you may used to get worried about your plants because they need water on regular basis. We develop this Automatic Plant Watering System to solve this problem as plants need water according to the moisture level of soil..
  • The kit includes a plus controller, DHT22 temperature and humidity sensor, I2C LCD, push button modules, power amplifier module, DS3231 clock module, non-contact level liquid sensor, motor driver module, capacitive soil humidity sensor, and pump..
  • More than 13 well-selected electronic modules and 17 step by step creative tutorials. Full example code is provided and explained and even includes useful software tool..
  • Multi-purpose: timing watering mode, and the sensor detection mode that when the soil is dry, Arduino will command the water pump to run(up to 4 plants at once)..
  • Our system measures the soil moisture and waters automatically according to it. A audio power amplifier module tells us when the bucket is empty. I2C LCD displays the temperature and humidity..
Check Stock

Creality CR-10 Smart Motherboard CR-10 Smart 3D Printer 32-bit Silent Mainboard with TMC2208+A4988 Stepper Driver V1.2 Silent Mother Board for CR-10 Smart

  • The main control uses the ARM-level Cortex-M4 series with a 32-bit dominant frequency of 168 MHz STM32F407ZGT6 chip, performance is greatly improved..
  • Equipped with highly modular open source firmware Marlin2.0, it is convenient for users to DIY and further-development, to avoid the worry of not....
  • Motor driver support :TMC5160,TMC2208,TMC2130,ST820,LV8729, DRV8825,A4988, etc.Display screen support: BIGTREETECH- 2.8 inch TFT,BIGTREETECH-3.5 inch....
  • Support Serial WIFI Online Printing. 6 motor drives, 3 extruders, 3 CNC fans. Reserve extended ports of BL Touch, PWM, ADC, UART, I2C and SPI.
Check Stock

Adafruit Power Relay FeatherWing [ADA3191]

  • High speed SPI display with digital I2C touchscreen driver.
  • Single-touch capacitive touch bonded on top.
  • 240x320 resolution, 18-bit GPU, 262, 000 color - our library uses 16 bit color mode. Ili9341 (data sheet) controller with built in video ram buffer.
  • We also have a touch screen library that detects x, Y and Z (pressure) and example Code to demonstrate all of it. The Code is written for arduino but can be easily ported to your favorite controller.
  • Works with any classic arduino '328. Solder closed three jumpers to use the icsp header for use with leonardo or Mega! 2.8" diagonal color touchscreen TFT.
  • Touchscreen controller requires I2C pins sda and Sca. Microsd pin requires digital #4.
  • That means you can use digital pins 2, 3, 5, 6, 7, 8 and analog 0-5. Pin 4 is available If not using the MicroSD.
Check Stock

MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano

  • Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
  • Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
  • 2.You should connect higher power supply for higher-power servo.
  • 3.Make sure servo are connected properly, otherwise they will not move..
  • Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
  • Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
  • Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..
Check Stock

KEYESTUDIO L298P Motor Driver HAT Shield GPIO for Raspberry Pi Model B/B+/A+/2/3/4 Zero and Zero W, High-Power Motor Speed Control Board Dual H Bridge with IR Receiver

  • This Motor Driver HAT gives your Raspberry Pi the ability to drive two DC motors, with drive current up to 2A..
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later versions.
  • Reserved I2C SPI control pins, allows to work with other control boards and sensors. Comes with an IR receiver for communication with an infrared remote controller..
  • Included 4x M2.5*20MM screws, 4 xM2.5*10MM copper pillars, 4x M2.5 Nuts. Easy to install on your RPi board. Please note Raspberry Pi board, remote control and motors in the photos are Not Included!.
Check Stock

Servo Driver HAT 16-Channel 12-bit I2C Interface PWM Outputs for Jetson Nano Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B Supports SG90 MG90S MG996R etc @XYGStudy

  • Servo Driver HAT for Raspberry Pi, 16-Channel, 12-bit, I2C Interface.
  • Needless to say, the Raspberry Pi is powerful enough in most cases, yet it's not that good at providing precise PWM output. You may have tried to....
  • Standard Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later version, Jetson Nano.
  • I2C controlled, using only 2 pins Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
Check Stock

AITRIP 12PCS TCA9548A I2C IIC Multiplexer Breakout Board Module 8 Channel Expansion Development Board for Arduino

  • The TCA9548A adapter is connected to an I2C device with multiple identical addresses on the same I2C port on the main control board for normal communication and use.There are 8 I2C interfaces on one expander, and there are eight bidirectional transfer switches that can be controlled by I2C bus. This means that after 1 expander is transferred, 8 identical addresses can be connected to the same I2C port..
  • Expansion board TCA9548A compatible with IIC bus and system management bus (SMBus), active low reset input, support for hot insertion, low standby current, no glitch during power-up, support for voltages between 1.8V, 2.5V, 3.3V and 5V buses Level shifting, TCA9548A I2C IIC multiplexer breakout board depending on the contents of the programmable control registers, any single SCn/SDn channel or combination of channels can be selected..
  • 12pcs TCA9548A I2C IIC Multiplexer Breakout Board 8 Channel Expansion Board for Arduino.
Check Stock

DORHEA 10PCS 0.91 12832 IIC I2C OLED Display Module 0.91inch I2C 128x32 SSD1306 LCD Display Module White I2C OLED Screen Driver DC 3.3V/5V with 4 Pin Headers for Ardu ino

  • 0.91 inch OLED display, no need backlight, self-illumination, Display Color : White, Resolution: 128 x 32..
  • The I2c OLED display performance is better than the traditional LCD display, also lower consumption, high resolution OLED for any of your micro....
  • The 0.91 display performance is better than the traditional LCD display, it uses the very common I2C bus, and runs on the SSD1306 display driver..
  • 0.91 oled compatible with Ardu ino, ESP8266, ESP32, STM32, etc.
  • The 12832 display can run on 3.3v. It is legible, even with 4 lines of text. Highly recommended for projects that require some form of user interface..
Check Stock

OSOYOO Smart House IoT Starter Kit for Arduino MEGA2560,Learning STEM Electronic Engineering Coding Programming, DIY Home Automation Building Set for Teens Adults

  • ...programming, IoT, and home automation. Based on the Arduino mega2560..
  • INCLUDES TUTORIALS: Learn how to assemble, code, program, and automate each home feature and device with easy to follow step-by-step tutorials. All the necessary programs, libraries, codes, software and driver installation files are also included in this starter pack..
  • APP CONTROL FEATURES:Use OSOYOO IoT APP to remotely control devices.please download it by searching 'OSOYOO iot udp robot car app' from Apple Store or Google Play Store(Android device)..
  • INCLUDES EVERYTHING YOU NEED: Includes Everything You Need To Build & Engineer Your IoT Home Kit: Wooden House Model, OSOYOO MEGA2560 Board, MEGA IoT Extension Board with an ESP12s wi-fi module, and various home automation devices: RFID, Flame Detection Modules,LED, Temperature & Humidity, PIR Motion Ultrasonic, Micro Servo Motor, 1602 I2C LCD Module, Button Modules, RGB Photosensitive, Buzzer, PnP Jumpers, Cables, & More..
Check Stock

DORHEA 2Pcs BME280 5V Temperature Humidity Atmospheric Barometric Pressure Sensor Module GY-BME280-5V IIC I2C Breakout Board

  • The BME280 sensor is a precision sensor, is soldered onto PCB, not only the pressure and the temperature, this sensor can measure humidity..
  • BME280 5V uses both I2C and SPI (supports 3-, 4-wire SPI) interface. Interface: I2C (up to 3.4MHz).
  • Temperature humidity module is great for all sorts of weather sensing and can even be used in both I2C and SPI. for simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI..
  • The BME280 stmospheric pressure sensor is made up of a very accurate pressure sensor and an associated temperature sensor which helps calibrate the pressure readings..
  • The BME280 sensor is precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are good, you can also use it as an altimeter with ±1 meter accuracy..
Check Stock

Aoicrie 5pcs PCA9685 16 Channel PWM Servo Motor Driver PCA9685 IIC Module 12-Bit, for Robot or for Raspberry pi Shield Module servo Shield

  • It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages)..
  • Communication Interface: IIC, PCA9685 contain an I2C-controlled PWM driver with a built-in clock..
  • 6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputs..
  • 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate..
  • 16 Channel PWM/Servo Driver IIC interface-PCA9685 for arduino or for Raspberry pi shield module servo shield..
Check Stock

RATTMMOTOR 400W Blushless CNC Air Cooled Spindle Motor ER8 12000RPM + 600W Blushless Spindle Motor Driver LCD Panel without Hall + 55mm Clamp Mount for CNC Router Milling Machine

  • 【Brussless Spindle Motor】Power: 400W.
  • Note: Please see clearly that this spindle motor output shaft is with ER8 collet,and output shaft is complete shaft, can't be exchanged to ER11, ER16....
  • 【Brussless Spindle Motor Driver】Maximum driver power: 600W.
  • Maximum driver motor running speed: 12000R/Min.
  • Brushless spindle driver（Model Name: NVBDL）is specialized for the ecomomic engraving machine,it matchs with the brushless DC motor. With the....
  • The users can take down the panel from the main driver and install it on the controller cabinet.By the panel,you can set the parameter,control motor....
Check Stock

16x2 Blue LCD Module Controller HD44780 Based for Arduino by Corpco

  • Size: 1.54in screen can provide clear view for you..
  • Drive Voltage: 3.3V-5V. The pin has good contact performance, ensure stable working.
  • Material: Adopted of high quality electronic components, and preciseness process, ensure for the durability.
  • Resolution: 128 x 64. Great workmanship, easy and convenient to install. Driver IC: SSD1309, compatible with SSD1306. Interface: SPI interface I2C interface.
  • Optional Style: Display White, Display Yellow, Display Blue. Available in three colors for your choice..
Check Stock