Reviews High power Motor Driver

DCK Impact Driver, 20V Max Brushless Cordless Impact Driver Kit, 1600 In-lb, 1/4" All Metal Hex, Variable Speeds, 4.0Ah Battery & Charger, 42 pcs Bits, Power Impact Driver for Metal, Wood (KDPL03-14)

  • ...argers for worry-free, long-lasting protection. Search "DCK battery" or "DCK charger" on Amazon and you will find it..
  • [Powerful Brushless Motor] The brushless motor is more suited to cordless tools. Compared to a brushed motor, a brushless motor impact driver performs better, lasts longer, and is cheaper, providing greater productivity on the job. The DCK 20V impact driver kit with variable speeds up to 2000 r/min and high torque up to 1600 inch-lbs, allows our power impact driver to drive screws or tighten nuts at impressive speeds. It's suitable for metal, wood, parts mounting, etc..
  • [Smart Loosen Technology & 1/4" All Metal Chuck] Smart loosen mode turns on when the green light on the cordless impact drill battery is on. It will automatically stop when tightening screws, providing excellent speed and torque balance for a wide range of uses. The speed is controlled by pressing the variable speed switch, the higher the pressure, the higher the speed. The 1/4" all metal hex impact driver for quick change chuck will improve work efficiency and save working time..
Check Stock

TIMPANO TPT-D3200TI-ND 2″ Exit Neodymium Titanium Compression Driver for High Output, Frequency Response from 1,600 to 19,000 Hz

  • Power You Can Rely On: The high energy motor is also response for output up to 110 dB with only one watt of input power.
  • New Technology: A neodymium motor focuses magnet flux into the gap while keeping driver weight below 3.92 pounds.
  • Designed for Efficiency: Compression horn driver uses a neodymium ring motor design to pack as much BL product into the voice coil gap as possible.
  • Solid Structure: When combined with the titanium dome diaphragm, to produce crisp sound over a broad range (from 1,200 to 18,000 Hz) with an emphasis on the critical mid range high range.
  • Quality You Can Trust: Choose Timpano’s D3200TI-ND titanium compression driver for a high output compression driver to be used for the critical mid range high (vocals).
Check Stock

8PCS L298N Motor Drive Controller Board Dual H Bridge DC Robot Stepper Motor Compatible with Ardu-ino Electric Projects, Smart Car Robot

  • Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
  • The L298N driver module, using L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface, you can chip circuitry to 5V power supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential..
  • Terminal driver part of the supply area VMS: +5V ~ +35V.
  • Drive part of the peak current Io: 2A / Bridge.
  • Logical part of the terminal power supply range Vss :4.5-5 .5V.
  • Logical part of the operating current range: 0 ~ 36mA.
  • The control signal input voltage range: 4.5-5.5V low 0V high.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
  • High working power to 46v, large current can reach 3A MAX and continue current is 2A, power to 25w..
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability, large capacity filter capacitance,afterflow protection diode, more stable and reliable..
Check Stock

RIDGID 18V Brushless 1/2" High Torque Hammer Drill/Driver

  • Drill/Driver: All Metal Gears For extended durability.
  • Drill/Driver: 24 Position Clutch Ring For ultimate precision when driving.
  • Impact Driver: Quick-Release Hex Collet Spring ejection for easy loading and removal.
  • Impact Driver: High Torque Output 0 - 1,800 in-lbs. of Torque.
  • Brushless Motor Technology Delivers more runtime, more power, and longer motor life.
Check Stock

DS18 PRO-DRNEO 2\ Throat Bolt On Neodymium Compression Driver 3\ Titanium Voice Coil 800 Watts 115dB 8-Ohm (Single)

  • DS18 designs its Compression Drivers with aluminum horns to make sure they are above and beyond the standard high frequency driver/tweeter/horns in the market. These bad boys give so much clarity to their frequencies that any audio enthusiast would believe their whole sound system is ready to deploy for a major concert..
  • PEAK POWER HANDLING - At 800W Max and 600W RMS the PRO-DRNEO neodymium compression (horn) driver boasts out-of-this-world power handling for a Pro audio sound you will love..
  • TOP QUALITY NEODYMIUM MAGNETS - Neodymium magnets provide a higher magnetic flux density in the air gap, which generates a much greater action force in the voice coil. DS18 manufacturs nothing but the best..
  • NEODYMIUM MOTOR STRUCTURE - Provides the most motor force of any other driver motor on the market. Intense high frequency loudness without sacrificing sound quality..
  • USE WITH A WIDE VARIETY OF HORN STYLES - This compression driver features standard 3" (101.6mm) TPI threading, which allows it to work as a replacement driver for many popular horns..
Check Stock

18V SubCompact Brushless 1/2 in. Drill/Driver and Impact Driver Combo Kit

  • Drill/Driver: All Metal Gears For extended durability.
  • Drill/Driver: 24 Position Clutch Ring For ultimate precision when driving.
  • Impact Driver: Quick-Release Hex Collet Spring ejection for easy loading and removal.
  • Impact Driver: High Torque Output 0 - 1,800 in-lbs. of Torque.
  • Brushless Motor Technology Delivers more runtime, more power, and longer motor life.
Check Stock

RIDGID 9 Amp Corded 1/2 in. Spade Handle Mud Mixer

  • Brushless Motor Technology delivers more runtime, power, and longer motor life.
  • Impact Driver: SubCompact model is 30% less weight and 35% more compact in comparison to RIDGID OCTANE Brushless Impact Driver R86039B.
  • Impact Driver: High torque output with 1,800 in./lbs. of torque and 2,900 RPM.
  • Impact Driver: Quick release hex collect ejection for easy loading and removal.
  • Battery: Up to 2X more runtime and has 2X longer life compared to standard lithium-ion batteries.
Check Stock

Bosch 18V 2-Tool Combo Kit with 1/2 In. Compact Drill/Driver and 1/4 In. Hex Impact Driver GXL18V-26B22

  • COMBO KIT: The Bosch GXL18V-26B22 is a reliable compact combo kit that includes two 18V tools (impact driver and drill/driver) designed to fit in tight areas and to provide Pro performance, along with two 2.0 Ah 18V batteries and a charger.
  • EFFICIENT: Featuring an efficient impact driver hammer-and-anvil system, the combo kit delivers Pro performance, with 1, 400 in.-Lbs. of max. torque in a lightweight tool that weighs just 2.4 lbs.
  • LIGHTWEIGHT: The included drill features a light but powerful drill motor that provides outstanding drilling production in a tool that weighs just 2.8 lbs..
  • VARIABLE SPEED: Featuring a variable-speed drill that furnishes control for high-speed (0-1, 700 no-load RPM) and high-power (0-450 no-load RPM)..
  • POWER: With a robust impact driver motor, the Bosch GXL18V-26B22 delivers a max. Of 3, 600 BPM for professional power..
Check Stock

Cordless Impact Driver Kit,20V MAX 1/4" Impact Driver Set with 1350 in-lbs Torque,Brushless Power Impact Driver with 2.0Ah Li-ion Battery,1 Hour Fast Charger and Tool Bag,LED light (Orange)

  • 【High Efficient Torque & Variable Speed】Are you troubled by intermittent operation？The powerful impact driver delivers 1350 In-lbs Max torque & 2200 RPM to provide you a consistent working process and keep the most fastening torque than a cordless drill. Also, you can adjust the variable speed you like by pressing the trigger button. In short, the powerful impact driver can help you force the driver bits into wood/metal/ or different type surface easily w/ the high performance impact driver..
  • 【Ultra Quality Battery】 Are you still struggled with the discontinuous operation? Worried about the battery remains? This durable impact driver equipped w/ ....
Check Stock

RATTMMOTOR 400W Blushless CNC Air Cooled Spindle Motor ER8 12000RPM + 600W Blushless Spindle Motor Driver LCD Panel without Hall + 55mm Clamp Mount for CNC Router Milling Machine

  • 【Brussless Spindle Motor】Power: 400W.
  • Note: Please see clearly that this spindle motor output shaft is with ER8 collet,and output shaft is complete shaft, can't be exchanged to ER11, ER16....
  • 【Brussless Spindle Motor Driver】Maximum driver power: 600W.
  • Maximum driver motor running speed: 12000R/Min.
  • Brushless spindle driver（Model Name: NVBDL）is specialized for the ecomomic engraving machine,it matchs with the brushless DC motor. With the....
  • The users can take down the panel from the main driver and install it on the controller cabinet.By the panel,you can set the parameter,control motor....
Check Stock

Large Current 50A H-Bridge High-Power Single-Channel Motor Driver Module Semiconductor Refrigeration

  • 【H-bridge Driver Module】The drive uses a full H-bridge driver module full-bridge MOSFET driver chip and composed with very low internal resistance and high current. MOSFET H-bridge driver circuit, with strong drive and braking effect, signal isolation chip isolates motor drive effectively..
  • 【Effective Protection】With the microcontroller PWM signal isolation, effectively protect microcontroller..
  • 【Input Maximum】To achieve the motor forward and reverse rotation, two PWM input maximum 200kHz frequency..
  • 【Fully Compatible】Power indicator is schematically clear. The power supply voltage 5V to 15V. 3.3V to 12V, PWM level is fully compatible. High current 50A..
  • 【Warm Tips】Ffor your safety and protection of use, our product is tested to ensure trouble-free installation and performance, please rest assured to buy..
Check Stock

Bosch GDX18V-1800CB15 18V Brushless Impact

  • Versatile two-in-one impact driver and impact wrench design – features a versatile hex shank with power Groove and a socket drive.
  • Powerful EC Brushless motor – delivers a max of 1, 800 in.-Lbs. Of torque and up to 4, 200 IPM for professional power.
  • CORE18V battery – provides next-gen li-ion 21700 Cell technology in a lightweight, high-power battery with optimal performance.
  • Electronic cell and motor protection – helps protect the tool and battery from overloading conditions.
  • Half driver, half wrench – features a 1/4 in. Quick-change hex shank with power Groove and a 1/2 in. Square drive, for using either bits or sockets.
Check Stock

3 Axis CNC Kit Nema23 Stepper Motor Dual Shaft 425oz-in 112mm 3A & Driver 40VDC 4A 128 microstep for CNC Router Milling Engraving Machine

  • ♞【Product】3 Axis nema23 stepper motor driver usbcnc controller kit.
  • ♞【Nema 23 Stepper Motor】 Nema 23 Stepper Motor / Holding Torque: 425oz-in,280Ncm / Motor Size:57x57x112mm / Phase:2 / 4pcs lead wire / 1.8 Step.
  • ♞【Stepper Motor Driver】FMD2740C Stepper Motor Driver / 4Amps / Support voltages:12 to 50V DC / 128microstep.
  • ♞【4 Axis USBCNC breakout board】 Come with Hand Control with USB Cable / Only support USBCNC software / input voltage: 15-36V DC..
  • ♞【DC Power Supply】400W 36V 11A DC Switching power supply.
Check Stock