Reviews Drv8825 Stepper Motor Driver Boards

DEVMO 5pcs DRV8825 Stepper Motor Driver Module with Mini Heat Sink for 3D Printer Accessories Compatible with RepRap 4 RAMPS 1.4 StepStick

  • ★The DRV8825 stepper motor driver carrier board TI DRV8825 micro bipolar stepper motor drive is a breakthrough..
  • ★Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step..
  • ★Simple step and direction control interface..
Check Stock

3D Printer Heatsink Kit + Thermal Conductive Adhesive Tape, Cooler Heat Sink Cooling TMC2130 TMC2100 A4988 DRV8825 TMC2208 Stepper Motor Driver Module (22pcs)

  • Can be applied for passive cooling of Stepper Motor Module TMC2130 TMC2100 A4988 DRV8825 TMC2208.
  • With thermal conductive adhesive tape backing.
  • Stepper motor driver module is not included.
  • Dimension: 0.35 x 0.35 x 0.47 inch / 9mm x 9mm x 12mm (L*W*H), Weight: 0.04 oz / 1 gr per piece.
  • Includes 22 pieces blue aluminum heatsink.
Check Stock

HiLetgo 5pcs DRV8825 Stepper Motor Driver Module for 3D Printer RepRap 4 RAMPS1.4 StepStick

  • 4-layer, 2 oz copper PCB for improved heat dissipation.
  • Can interface directly with 3.3 V and 5 V systems.
  • Simple step and direction control interface.
Check Stock

42 Motor 1.5A 17HS4401S with TB6600 Stepper Motor Driver NEMA17 23 for CNC and 3D Printer

  • ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible....
  • ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great....
  • ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of....
  • ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum),....
  • ★ Good after-sales service. We'll respond within 24 hours for any questions..
Check Stock

Happybuy Linear Rail 3 Ballscrew RM1605-350mm 650mm 1050mm Linear Rail Support 12 CNC Kit Linear Shaft Optical Axis

  • ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible....
  • ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great....
  • ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of....
  • ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum),....
  • ★ Good after-sales service. We'll respond within 24 hours for any questions..
Check Stock

Aitrip 5pcs TMC2209 V3.0 Stepper Motor Driver for 3D Printer SKR V1.3 SKR with heatsink 256 Microsteps Current 2.8A Peak for Reprap Ramps1.4 MKS Gen Mainboard Parts (5pcs)

  • TMC2209 V3.0 Stepper Motor Driver is an ultra-quiet two-phase stepper motor drive chip.
  • It can compatible with StepStick and Pololu A4988.
  •  It can replace the original TMC2208, A4988, DRV8825, LV8729 and so on.
  • 5 pcs Drive capability up to 1.7A (RMS) continuous coil current - 2.8A Peak.
  • Step/Dir interface with microstep interpolation (up to 256 microsteps).
Check Stock

SainSmart Genmtisu CNC Router Machine Controller Board with ABS Case for CNC 1810-PRO/3018/3018-PRO

  • This controller board is designed for Genmitsu CNC Router 1810-PRO, 3018, and 3018-PRO. It can perfectly compatible with SainSmart Blue Laser Module..
  • Software: GRBL controller, UniversalGcodeSender..
  • Support XYZ three-axis control, spindle and laser module. Support 3 pin and 2 pin lasers (the 2 pin lasers: please connect the white interface " + s-")..
  • Support stepper motor: 12V, the maximum current within 2A, recommended within 1.5A and additional heat. (Any stepper motor 42, 57)..
Check Stock

Stepper Motor HAT for Raspberry Pi,Jetson Nano Onboard Dual DRV8825 Motor Controller Built-in Microstepping Indexer Drives Two Stepper Motors Up to 1/32 Microstepping 5V 2.5A

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Protection features: Overcurrent Protection (OCP), Thermal Shutdown (TSD), VM Undervoltage Lockout (UVLO).
  • Integrates 5V regulator, allows providing power to Raspberry Pi.
  • 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
  • Adjustable motor drive current via potentiometer, maximum 2.5A current output.
  • Onboard dual DRV8825 motor controller IC with built-in microstepping indexer, drives two stepper motors, easy to use.
  • Onboard multi connector options for stepper motors in different specifications.
Check Stock

MKS GEN L V1.0 Controller Board 3D Printer Kit Mainboard Ramps1.4 Dual Extruder Touch for 3D Printer Accessories

  • Support a Variety of Stepper Drivers -- 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like..
  • Reserve External Driver Signal -- available to connect external high-current driver to drive the 57 and 86 stepper motors. Use high-quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V-24V power input, and resolve t..
  • Use CH340 Serial Port Chip -- Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2..
  • Support 24V Input -- The heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run Marlin firmware, the configuration is completely same as Ramps 1.4..
  • Compatible With -- Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32. X-axis, Y-axis and Z-axis with different color terminal controls the stepper motors and endstops, which is convenient to wire..
Check Stock

Tempco Men's Fisherman Vest - TM209-CHARCOAL XL

  • Well Packaged - With a storage box for 102pcs heatsinks, it perfectly divides the heat sinks into 17 categories..
  • Multiple applications - It can Cool Raspberry Pi VRM VRAM CPU GPU Small IC Laptop 3D Printers Stepper Motor Modules TMC2130 TMC2100 A4988 DRV8825 TMC2208. Multiple sizes, multiple application scenarios..
  • Good heat dissipation effect - Various Aluminum and Copper heat sinks with Thermal Conductive Adhesive Tape for cooling Raspberry Pi 4 and electronics components..
  • Different Sizes - 102pcs multicolor heatsinks in different sizes contains 92pcs aluminum heatsink and 10pcs copper heatsink..
  • Package Includes: 102pcs multicolor heatsinks, 1x Storage Box..
Check Stock

BIGTREETECH TMC2208 V3.0 UART Mode Stepper Motor Driver 3D Printer Parts 4 PCS

  • The TL-Smoother is an addon module for 3D printer stepper motor drivers.
  • Lower vibration lower noise smoother result.
  • The board provides flyback diodes (freewheeling diodes) for the motor outputs.
  • Also protected against induction voltages in the unpowered state of the driver.
  • You will got smoother movement especially on the delta-style 3Dprinter under DVR8825 stepper drivers and A4988/2 drivers.
Check Stock

Aoicrie MKS Gen L V1.0 3D Printer Integrated Mainboard Controller PCB Board Compatible Ramps1.4/Mega2560 R3 with A4988 Motor Driver for 3D

  • ...arlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly..
  • Use high quality MOSFET tube,better cooling and more stable.Use special power chip,support 12-24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently and power shortage..
  • Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines..
  • Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces..
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage toachieve higher step rates.Use the configuration file to set the driving current mode, avoid manual....
Check Stock

GeeekPi 102pcs Heatsink Kit with Conductive Adhesive Tape, Cooler Heat Sink Cooling Raspberry Pi VRM VRAM CPU GPU VGA Small IC Laptop LED MOSFET Transistor SCR Voltage Regulator

  • Well Packaged - With a storage box for 102pcs heatsinks, it perfectly divides the heat sinks into 17 categories..
  • Multiple applications - It can Cool Raspberry Pi VRM VRAM CPU GPU Small IC Laptop 3D Printers Stepper Motor Modules TMC2130 TMC2100 A4988 DRV8825 TMC2208. Multiple sizes, multiple application scenarios..
  • Good heat dissipation effect - Various Aluminum and Copper heat sinks with Thermal Conductive Adhesive Tape for cooling Raspberry Pi 4 and electronics components..
  • Different Sizes - 102pcs multicolor heatsinks in different sizes contains 92pcs aluminum heatsink and 10pcs copper heatsink..
  • Package Includes: 102pcs multicolor heatsinks, 1x Storage Box..
Check Stock