Reviews Triple Sheave Pulley Block

VEVOR 2ton Snatch Block with Chain 4400 lbs Capacity Snatch Rigging Block 3 Single Sheave Block w/Swivel Hook G70 Chain Fit 3/8 Wire Cable Heavy Duty for Pulling Wrecker Roll Back Recovery

  • 4400 LBS loading Capacity: The working load capacity is up to 4400 lbs, able to lift and tow heavy loads. 3'' sheave size, fitting for 3/8" wire cable. 10'' x 3'' in dimension is compact for easy storage. Chain Size: 31.5 inch * 5/16 inch..
  • Steel Frame with Chain: Built by heavy-duty steel with a powder-coated finish, our snatch block pulley system has better immunity to corrosion and rust. Also, our high-strength G70 chain with grab hook won’t wear out from rust over time..
  • 3-Inch Single Sheave: Smooth single sheave protects the rope from damaging and saves more effort. It is possible to remove one side by taking the pin off, slip in the winch cable, and change your pulling direction to pull a vehicle out of an awkward place..
  • 360° Rotation: Adopt a one-piece casting process.
  • the cable pulley block features the swivel shackle for great convenience and enhanced security. The built-in security device avoids accidental falling..
  • Wide Application: Our snatch block pulley is widely used to do the lifting, towing, recovery, and rigging jobs outdoor and indoor, ideal for factories, warehouses, garages, shipbuilding, engineering machinery, etc..
Check Stock

Garage Door Lift Cable 3/32 (for 8)

  • 4" Heavy Duty Sheave Pulley - 4" Garage Door Pulley Sheave - 4" Riveted Sheave - Zinc Plated.
  • Use on Residential Doors/ Light Commercial.
Check Stock

GM CLIMBING 32kN UIAA Certified Large Rescue Pulley Single/Double Sheave with Swing Plate CE/UIAA (Black)

  • Quality-manufactured pulley for mountain rescue, tower work, ski patrol or whatever requires block and tackle system..
  • Sheave of 2.24 inches Dia, pulley with large sheave is much better and easier for hauling big load..
  • Mounted with ball bearing for higher efficiency and smoothness! Swing side for easy and rapid rope installation and removal!.
  • CE / UIAA Certification! Rating to 32kN / 7100lbs for high durability to satisfy all your requirements, like pulling a stranded boat, hauling some out of a crevasse, etc..
  • Compatible with wide range of ropes, up to 16mm (5/8")! Multiple anchors for complex rescue / hauling system setup!.
Check Stock

Snatch Block Wire Rope Cable Pulley yarding (for 3 Tons - 4\)

  • Snatch Block, Yarding Block Wire Rope Cable Pulley (for 3 tons - 4").
Check Stock

Maasdam Rope Puller Kit- with 200' Rope, Spliced Hook and Loopie Sling

  • Very high efficiency single pulley with one-way rotation and swivel.
  • Designed to be used in conjunction with a descender for maximum simplicity when setting up a heavy load deviation or haul systems for work at height or rescue.
  • Optimal hauling efficiency and lowering convenience: the faceted sheave only rotates in one direction, providing excellent efficiency when hauling and adding friction zones for the rope for additional braking when lowering heavy loads.
  • Easy handling: swivel allows pulley to be oriented under load and accepts up to three carabiners and allows the use of ropes and slings to facilitate maneuvers..
  • Sheave diameter: 40 mm maximum usage load: 3 x 2 = 6 kN.
Check Stock

GM CLIMBING 40kN Micro Double Pulley Prusik Minding Ball Bearing UIAA CE for Progress Capture System Rigging Hauling Rescue Arborist Tree Climbing

  • ...or you in a wide variety of applications, like general rigging, hauling, dragging system, rescue, tree climbing, mountaineering, etc..
  • Easier rope installation and removal due to swing side plates. You don't have to thread rope from end to end, much facilitate the set-up progress of system. Prusik minding plates and sheaves efficiently tend prusik of progress capture system..
  • The closing style of connecting point qualifies the pulley to be compatible with most kinds of carabiners. Large connecting space, enough for 2 carabiners attachment. Bottom becket creates additional attachment point, simplifying the whole system..
  • Adoption of ball bearing sheave assures a nicely smooth rotation as well as keep up to its maximum efficiency..
  • Certified and conforming to CE EN 12278 (for pulley), Rating to 40kN=2 x (10kN+10kN) breaking strength. 36mm / 1.41in sheave diameter, provides high pulley efficiency for all you need for a pulley, no matter in arborist applications, or pulling a stranded boat, hauling some out of a crevasse, etc..
Check Stock

GM CLIMBING 40kN Micro Double Pulley Prusik Minding Ball Bearing UIAA CE for Progress Capture System Rigging Hauling Rescue Arborist Tree Climbing (Pack of 2)

  • ...ke general rigging, hauling, dragging system, rescue, tree climbing, mountaineering, etc..
  • Easier rope installation and removal due to swing side plates. You don't have to thread rope from end to end, much facilitate the set-up progress of system. Prusik minding plates and sheaves efficiently tend prusik of progress capture system..
  • The closing style of connecting point qualifies the pulley to be compatible with most kinds of carabiners. Large connecting space, enough for 2 carabiners attachment. Bottom becket creates additional attachment point, simplifying the whole system..
  • Adoption of ball bearing sheave assures a nicely smooth rotation as well as keep up to its maximum efficiency..
  • Certified and conforming to CE EN 12278 (for pulley), Rating to 40kN=2 x (10kN+10kN) breaking strength. 36mm / 1.41in sheave diameter, provides high pulley efficiency for all you need for a pulley, no matter in arborist applications, or pulling a stranded boat, hauling some out of a crevasse, etc..
Check Stock

PETZL - ROLLCLIP A, Pulley-Carabiner, Triact-Lock

  • Facilitates manipulations: - Keylock system prevents any accidental snagging of the carabiner when putting the pulley in place - gate opening on the pulley side facilitates installation of the rope when the pulley is fixed to the anchor - may be used with a CAPTIV positioning bar to favor loading of the carabiner along its major axis and to limit the risk of it flipping - sheave mounted on sealed ball bearings for excellent efficiency.
  • With TRIACT-LOCK locking system: may be used to minimize friction on the work rope while keeping set-ups simple. May also be used to install redirects..
  • H profile of carabiner: - ensures an improved strength-to-weight ratio - protects markings from abrasion.
  • Specifications Material(s): aluminum Min. rope diameter: 7 mm Max. rope diameter: 13 mm Sheave diameter: 18 mm Maximum working load: 2 x 2 = 4 kN Efficiency: 85 % Major axis strength: 20 kN Minor axis strength: 8 kN Open gate strength: 7 kN.
  • Warning: RollClip Triact- Lock can't be used with Ascender (doesn't fit through the holes).
Check Stock

Mytee Products Snatch Block with Hook WLL 2 Ton 3 Sheave 3/8 Inch Wire Rope Wrecker Roll Back Recovery

  • The snatch block is a pulley system with covered and protected yet removable sides..
  • Snatch blocks or pulleys are used to change the direction of the pull to a different angle relative to a fixed point..
Check Stock

Mytee Products Snatch Block with Hook WLL 8 Ton 6 Sheave 3/4 Inch Wire Rope Wrecker Roll Back Recovery

  • The snatch block is a pulley system with covered and protected yet removable sides..
  • Snatch blocks or pulleys are used to change the direction of the pull to a different angle relative to a fixed point..
Check Stock

Mytee Products Snatch Block with Hook WLL 4 Ton 4 1/2\ Sheave 1/2 Inch Wire Rope Wrecker Roll Back Recovery

  • The snatch block is a pulley system with covered and protected yet removable sides..
  • Snatch blocks or pulleys are used to change the direction of the pull to a different angle relative to a fixed point..
Check Stock

Fenner Drives 6899549 AFD12434 Driven Pulley, Fixed 3/4\ Bore, 12.25\ OD

  • Removable Axle & Sheave For Easier Rigging.
Check Stock

Dial Steel Silver Fixed Motor Pulley

  • Removable Axle & Sheave For Easier Rigging.
Check Stock