Reviews Belt Sheave

Polaris Snowmobile Quick Drive Belt Kit, Part 2206046

  • The ROP Shop replacement 103 HPQ Drive Clutch.
  • Specs - Clutch Type: 103 HPQ (High Performance Quad). Refer to images 2 & 3 for more information.
  • This 103 HPQ clutch allows for a quicker shift out and a greater top end speed. This clutch has a larger diameter pulley and greater sheave angles than OEM to provide more ratio and less wear on the drive belt and sheave faces. The increased angle of the sheaves means smoother up shift because the moveable face pushes (not pinches) the belt to the outer diameter of the clutch. Reported performance enhancements of 25% over the OEM clutch with performance kits is typical.
  • This clutch does NOT have the EBS feature, but will fit models with EBS. Operator can use this clutch but will NOT have the EBS feature. When installing you will need to use an 18mm bolt with a 2.5 thread pitch in order to remove the clutch.
Check Stock

Phoenix V-Belt Pulley - 5/8in. Bore, 2 1/2in. Outside Dia. Model Number 125058

  • Classical V-belt sheave fits widely available, classical profile V-belts suitable for use in many existing drive designs.
  • Cast iron for resistance to wear and galling.
Check Stock

Gates A46 Hi-Power II Belt

  • Suitable for all industrial applications, including v-flat drives.
  • Gates curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life.
  • Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord....
  • The Flex-Weave Cover is a patented fabric construction for longer cover life, providing extended protection to the belt core from oil, dirt and heat.
  • Meets or exceeds RMA standards for static conductivity and oil and heat resistance.
Check Stock

Gates A31 Hi-Power II Belt

  • Suitable for all industrial applications, including v-flat drives.
  • Gates curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life.
  • Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
  • The Flex-Weave Cover is a patented fabric construction for longer cover life, providing extended protection to the belt core from oil, dirt and heat.
  • Meets or exceeds RMA standards for static conductivity and oil and heat resistance.
Check Stock

TB Woods 403B Classical V-Belt Sheave, B Belt Section, 3 Grooves, SH Bushing required, Cast Iron, 4.35\ OD

  • Classical V-belt sheave fits widely available, classical profile V-belts suitable for use in many existing drive designs.
  • Cast iron for resistance to wear and galling.
  • Three grooves for multiple or banded belt use.
Check Stock

TB Woods AK241 FHP Bored-to-size V-Belt Sheave, A Belt Section, 1 Groove, 1\ Bore, Cast Iron, 2.45\ OD, 10210 max rpm

  • Classical V-belt sheave fits widely available, classical profile V-belts suitable for use in many existing drive designs.
  • Cast iron for resistance to wear and galling.
Check Stock

TB Woods 2BK65 FHP QT Bushed V-Belt Sheave, B Belt Section, 2 Grooves, QT Bushing required, Cast Iron, 6.25\ OD, 4000 max rpm

  • Classical V-belt sheave fits widely available, classical profile V-belts suitable for use in many existing drive designs.
  • Cast iron for resistance to wear and galling.
  • Two grooves for multiple or banded belt use.
Check Stock

TB Woods AK2558 FHP Bored-to-size V-Belt Sheave, A Belt Section, 1 Groove, 5/8' Bore, Cast Iron, 2.55' OD, 9810 max rpm

  • Classical V-belt sheave fits widely available, classical profile V-belts suitable for use in many existing drive designs.
  • Cast iron for resistance to wear and galling.
Check Stock

East Lake Axle replacement for CVT carbon fiber drive belt Polaris Snowmobile Indy 440/500 / XLT 600 / Super Sport/Trail 3211070

  • Please verify your year, make and model in the product details before purchasing..
  • OEM Replacement carbon fiber drive belt for snowmobile.
  • Align the clutches according to manufacturer's specifications and clean the sheaves with a scuff pad. Remove old belt residue, glazing, oils and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER..
  • Perform two heat cycles in 20 miles. Conservatively run through the entire shift range, without exceeding 3/4 throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process..
Check Stock

Terre Products - V-Groove/V-Belt Drive Pulley, 2'' Outside Diameter, 3/4\ Bore, Die Cast, Z3A Zinc Alloy, Compatible Replacement for Chicago Die Cast 200A

  • Classical V-belt sheave fits widely available, classical profile V-belts suitable for use in many existing drive designs.
  • Cast iron for resistance to wear and galling.
Check Stock

Terre Products - V-Groove/V-Belt Drive Pulley, 2.5'' Outside Diameter, 5/8\ Bore, Die Cast, Z3A Zinc Alloy, Compatible Replacement for Chicago Die Cast 250A

  • Classical V-belt sheave fits widely available, classical profile V-belts suitable for use in many existing drive designs.
  • Cast iron for resistance to wear and galling.
Check Stock

Martin 2AK114 1 3/8 FHP Sheave BS, 3L/4L or A Belt Section, 2 Grooves, 1-3/8\ Bore, Class 30 Gray Cast Iron, 11.25\ OD, 2205 max rpm, 10.66\ Pitch Diameter/11 Datum

  • Classical V-belt sheave fits widely available, classical profile V-belts suitable for use in many existing drive designs.
  • Class 30 gray cast iron for resistance to wear and galling.
  • Two grooves for multiple or banded belt use.
Check Stock

QWORK Single Groove Web Sheaves 3 OD 5/8 Bore V-Belt Sheave A Belt Section for V-Belt,AK30-5/8

  • High Quality: Made of high quality cast iron with electrophoresis, durable, corrosive resistant..
  • Single Groove&A Belt: Features A cross section and one groove, it can only use for the single belt..
  • Size: The outer diameter is 3 inches. The bore is 5/8"..
  • Wide Application: Classical V-belt sheave fits a variety of classical profile V-belts, suitable for use in many existing power.
  • 100% Satisfied Service: Enjoy a smooth&worry-free return service within a month, and any questions feel free to contact us, we will be here for you..
Check Stock