CURRENT TOOLS 406 Hook Type Sheaves - 6\ Diameter Heavy Duty Cable Guide with Welded Steel Frame & 4 000 LB Capacity
- RUGGED DURABLE CONSTRUCTION - Built with high strength American steel this 6" welded frame hook type sheave is designed to withstand the toughest jobsite conditions.
- 4000 LB CAPACITY - This sheave boasts a 4 000-pound cable pulling capacity to handle large jobs with ease.
- SELF-LUBRICATED BEARINGS - The 5” wide aluminum sheave comes with self-lubricated bearings for efficient use for years to come.
- LIGHTWEIGHT - Weighing just 11 5 lbs this lightweight hook type sheave is easy to transport and maneuver around the job site.
- MADE IN THE USA - This Current Tools product is 100% designed and manufactured in the United States of America.
Check Stock
VEVOR 2ton Snatch Block with Chain 4400 lbs Capacity Snatch Rigging Block 3 Single Sheave Block w/Swivel Hook G70 Chain Fit 3/8 Wire Cable Heavy Duty for Pulling Wrecker Roll Back Recovery
- 4400 LBS loading Capacity: The working load capacity is up to 4400 lbs, able to lift and tow heavy loads. 3'' sheave size, fitting for 3/8" wire cable. 10'' x 3'' in dimension is compact for easy storage. Chain Size: 31.5 inch * 5/16 inch..
- Steel Frame with Chain: Built by heavy-duty steel with a powder-coated finish, our snatch block pulley system has better immunity to corrosion and rust. Also, our high-strength G70 chain with grab hook won’t wear out from rust over time..
- 3-Inch Single Sheave: Smooth single sheave protects the rope from damaging and saves more effort. It is possible to remove one side by taking the pin off, slip in the winch cable, and change your pulling direction to pull a vehicle out of an awkward place..
- 360° Rotation: Adopt a one-piece casting process.
- the cable pulley block features the swivel shackle for great convenience and enhanced security. The built-in security device avoids accidental falling..
- Wide Application: Our snatch block pulley is widely used to do the lifting, towing, recovery, and rigging jobs outdoor and indoor, ideal for factories, warehouses, garages, shipbuilding, engineering machinery, etc..
Check StockCaltric compatible with Complete Primary Drive Clutch Polaris RZR 570 2013 2014 2015 2016 (EBS Type) 1323058
- Complete Primary Sliding, Fixed Sheave and Belt.
- Order Includes: 1x Complete Primary Sliding Sheave, 1x Fixed Sheave, 1x Belt.
- We strongly suggest comparing the posted picture to the unit(s) that needs to be replaced..
Check StockNational Hardware N220-012 3213BC Fixed Single Pulley in Zinc plated
- Swivel eye has the mobility of 360 degrees allowing for change in direction.
- Made out of steel making it strong, durable, waterproof, and resistant to temperature changes, corrosion, and rust.
- Used in both indoor and outdoor applications for tent tightening, rope or industrial lifting, and many other uses.
- Measurements include sheave height of 1 inch, sheave height of 3/4 inches, and sheave height of 1 1/2 inches.
Check Stock
Johnson Level & Tool 40-6200 Magnetic Sheave Alignment Laser, Red, 1 Laser
- DECREASED VIBRATION: This Johnson Magnetic Sheave Laser is designed to offer a high accuracy level ranging from +/- 1/6 in. to 10 ft. It is made to decrease vibrations on pulleys and sheave systems, helping minimize wear on belts and motor bearings..
- SECURE FITTING: The alignment level tool features rare earth magnets that ensure a secure attachment to ferrous metals, allowing quicker and safer set up. The strong magnets offer accurate alignment for reduced noise and abrasion..
- COMPACT SIZE: Featuring three laser targets, the magnetic aligning tool easily adjusts to various width sheaves for versatility. The compact size of the tool also makes it easy to use on sheaves with a small diameter..
- APPLICATION: This sheave laser has a red laser wavelength of 635nm+/-10nm to quickly check height and flatness of gear box and motor mounting plates. It is also suitable for various alignment jobs on sprockets, rollers and other plant equipment..
- PRODUCT SPECIFICATIONS: This Red Sheave Alignment Kit is powered by 2 "AAA" alkaline batteries (included) and has a battery life of up to 10 hours. It comes packed in a hard case for protection and easy carrying..
Check StockSnatch Block Wire Rope Cable Pulley yarding (for 3 Tons - 4\)
- Snatch Block, Yarding Block Wire Rope Cable Pulley (for 3 tons - 4").
Check StockKoch 3250393 3 Snatch Block Double Sheave
- Made of 304 stainless steel, sturdy, anti-rust and corrosion-resisttant with strong structure.
- Rope Size Range: 3/8-1/2 Inches, Sheave Diameter: 2 Inches, Overall Length: 5 Inches.
- Easy installation of a flexiable sliding pulley for kayaks, canoes, construction, household project.
- Smooth turning wheels, 360 degree rotation to prevent rope or cable from knotting.
Check Stock4\ Cast Iron Pulley with Bearing - Garage Door Parts 4\ Sheave Pulley (1)
- Rated at 900 Pounds @ 35K Cycles of a 12' Tall Overhead Garage Door.
- Sealed ball bearings on each side pressed into the sheave.
Check StockGarage Door Torsion Spring Center Support Bracket Residential Mini USA Center Su
- Rated at 600 Pounds @ 35K Cycles of a 12′ Tall Overhead Garage Door.
- 3/8″ Bore, 9/16″ Wide, 4-1/4″ Across.
- Sealed ball bearings on each side pressed into the sheave.
Check Stock500 Lb Pickup Truck Hydraulic Pwc Dock Jib Engine Hoist Crane Hitch Mount Lift
- Package Content: 10pcs x Crane Pulley Block.
- Sheave Size: 15 x 10mm/ 0.59" x 0.4"(D*T).
- Overall Size: 62 x 21 x 16mm/ 2.4" x 0.83" x 0.63"(L*W*T).
- Swivel Eye Inner Size: 14 x 11mm/0.55" x 0.43" (L* W ).
Check StockTowing Services Receipt Book: 60 Invoices (6"x9" ) Work Orders for Towing and Transport Services
- Set of two. 2 Ton Snatch Block with hook..
Check StockBA Products 6I-2T3-x2, 2 Ton Snatch Block with 3\ Sheave Wheel for Tow Truck, Rollback, Farm Equipment, Wrecker
- Set of two. 2 Ton Snatch Block with hook..
Check StockIndusco 75700006 Zinc Plated Steel Replacement Sheave with Bronze Bushed, 600 lbs Working Load Limit, 3/16\ Cable Size, 2\ Diameter x 1/2\ Bore
- Measures 2-inches diameter by 1/2-inches bore.
Check Stock
