Reviews Hose Fittings

POWERTEC 70207 4 Inch Flexible Dust Collection Hose and Fittings Kit

  • INCLUDES: (1) Flexible Dust Collection Hose 4” x 12” | (2) Screw End Fittings, (1) Oval Tapered Nozzle and (1) Rectangular Nozzle.
  • FUNCTION: A complete dust collector hose kit that possesses a versatile assortment of fittings intended to promote project flexibility and optimal airflow to your dust collection system.
  • HARD TO REACH: A flexible hose is designed with a 4” diameter for component compatibility, and a 12” length that can expand up to an impressive 36 inches for out-of-reach applications.
  • FITTINGS: Rectangular and oval tapered nozzles provide optimum adaptability with table saws, sanders, drill presses, routers, and other woodworking equipment.
  • QUALITY: The hose is made out of polypropylene (PP), with both pliable to rigid profiles – while the fittings are all constructed out of ABS plastic for heavy duty use and long-term durability.
Check Stock

Garden Hose Washers Pack of 10. Made from Heavy Duty Rubber. Self Locking Tabs Keep Washer Firmly Set Inside Fittings

  • Gardenite hose washers are made from heavy duty thermoplastic rubber construction..
  • These heavy duty rubber hose gaskets fit all standard 3/4" garden hose fittings..
  • Designed with 4 small outer tabs to keep washers in place and properly seated. This prevents washers from falling out of the hose fittings..
  • The Gardenite heavy-duty rubber hose washers fit all standard female garden hose fittings..
  • Each heavy duty rubber gasket has external diameter of 1 inch, the internal diameter is 5/8 inches and the thickness is 1/8 inches..
Check Stock

AINEED Hose Repair Kit, 3 Sets Solid Brass Garden Hose Quick Connect Male to Female Connectors, 3 Sets 3/4 Inch Brass Garden Hose Repair Connector with 6 Pieces Stainless Steel Clamps

  • [Quick and Easy to Install] These garden hose fittings are very easy to connect and disconnect, quick release allows for easy attach and removal of hose. Convenient quick connect hose adapter provides tight, secure fittings, no-Leak connection.
  • [Life Time Warranty] Confident in our products, if for any reason you are not SATISFIED, contact us and our customer service team will help you RETURN or REFUND.
  • [Package Includes] Come with 3 sets of brass male and female quick connectors, 3 sets of aluminum garden hose repair kit and 6 pieces rubber washers. This hose quick connect brass set is durable and leak-free for gardening use in all sessions.
  • [Sturdy Hose Repair Kit] 3 male & 3 female garden hose repair ends, made of premium aluminum with copper-like color surface, and 304 stainless steel clamps, use for repairing or replacing broken female or male hose connector, water hose end.
  • [Durable Material] Made of high quality brass, rust proof solid brass to make sure connector fittings are durable enough with no leaking quality. Quick disconnect fittings allow easy attach and removal of the connector anytime.
Check Stock

MSCRP Fuel Injection Line Fitting Adapter Kit EFI FI w/Filter/Regulator LS Conversion

  • 1Pc 6AN 25 feet of high-pressure fuel injection hose.
  • 1Pc 6AN to 3/8" Male Straight Filter Fittings+1Pc 6AN to 5/16" Fuel Filter Return Line Fitting.
  • 2Pcs 6AN to 3/8" Fuel Filter Feed Line Fittings+2Pcs -6AN to 1/4" NPT Fuel Pump Adapters+2Pcs 45 Degree -6AN Female to 3/8" Push Lock hose fittings.
  • 6Pcs straight -6AN Female to 3/8" Push Lock hose fittings.
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconn....
Check Stock

mistcooling Outdoor Misting System Kit-125ft-30Nozzles Cooling Kit-125, 125 Ft-30 Nozzle

  • Tubing: 3/8” OD Flexible PE Tubing, Max burst pressure is 300psi at 75°F, UV Resistant Flexible Tubing, Easy to Cut , Easy to bend. Nozzles: Nickel-plated brass button series, with stainless-steel Orifice, Standard 10/24” thread in, 0.015” OD Orifice, Rust-resistant fixed impeller pin.
  • Fittings: 3/8” OD, Compression Fittings, Beige Color to blend with most patios and backyards, Compression Type Fittings, Leak Proof, Fittings Included – Misting Tees, Misting End Elbow , Coupler, Compression Elbow for Corners , and 3/8 Compression Tees to split the mist line. Garden Hose Adapter:3/8” OD, Fits most Garden Faucets, With Filter, Washer to protect your nozzles..
  • ¾ Inch “Y” Connector – Hose Splitter : Dual shut-off valve controls water flow , Extra large , plastic handles for easy grip and turn , Easy-on swivel connector prevents hose kinks by allowing hose to turn , 2 Way Y Hose Splitter : The garden hose splitter has 2 Way connectors and 2 valves. After using the water splitter, it easily converts 1 spigot into 2 high flow water sources. It can make your garden life easier..
Check Stock

Joywayus Brass Hose Fitting,90 Degree Elbow,3/8\ Barb x 3/8\ NPT Male Pipe Water/Fuel/Air (Pack of 2)

  • 【Solid Brass】The hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
  • 【Package Include】3PCS 5/8"x5/8"x5/8" Brass 90°Included Angle Y Hose Barb Fittings..
  • 【Heavy & Thick】Heavy Y shaped brass barbs and thickened wall, higher strength and very rugged..
  • 【Solid Connection】The Y shaped hose barb fittings can be solid connected to the hose (Fit hose which ID of 16mm)..
  • 【Note】Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage..
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
Check Stock

Jeeker Garden Hose Repair Kit, Zinc and Aluminum Male and Female Hose End, Suitable for 3/4 Inch and 5/8 Inch Garden Hoses (2Sets)(2Female+2Male)

  • 【PACKAGE】We offer you 2 couples of male & female hose repair kits, 2 Sealing tapes and 4 pieces rubber washers. The reusable water hose repair kit features premium constructions..
  • 【MATERIAL】The garden hose repair fittings are made of high-quality aluminum, the clamps are made of zinc, the screws are made of stainless steel..
  • 【SIZE】The quick connect garden hose fittings are designed basing on the inner diameter of the 16mm and 19mm hoses, so they match well with the devices which accept 5/8 inches connection or 3/4 inches connection..
  • 【CONVENIENCE】The water hose repair kit is equipped with thread design, so you can connect the male hose end repair and the female hose connector easily and quickly..
  • 【SATISFACTION】100% customer guarantee, just contact us if you are not 100% satisfied with your water hose connectors and fittings, then we will support 100% service for your satisfaction..
Check Stock

Camco 39855 RhinoEXTREME Compartment Hose - 2', Orange

  • Perfect for Tight RV Sewer Compartments: Hose makes hookup easier in tight RV sewer compartments.
  • Superior Abrasion-Resistant Exoskeleton: Hose has superior abrasion resistance due to its exoskeleton design.
  • Improved Compression: Compress, bend or crush the hose and it will maintain its shape.
  • Pre-Attached Swivel Fittings: Fittings swivel for easy connection.
Check Stock

HZFJ 1PCS 1/2

  • ☛use☚Adapter for connecting hose or fittings of different types The garden tap hose connectors is precision engineered to be long lasting and leak free..
  • ☛Reminder☚Requires hose clamp( 1pcs included hose clamp).
  • ☛Texture☚The fittings are solid brass, so are much more hard wearing than plastic systems, and are rust resistant..
  • ☛100% AFTER SALE SEVICE☚We provide a return policy for you to ensure you 100% satisfaction. Would you have any questions to our product, please feel free to contact us and we will give you a quick response..
Check Stock

1/2’’ Soaker Hose 10 Ft 15Ft Soaker Hoses for Garden 100 Ft Garden Soaker Hose 25 Ft 50 Ft Drip Hoses for Garden Drip Garden Hose Irrigation System 10 feet

  • Permeable Material To Distribute Water - The soaker hose is made from a partially permeable material. The soaker hose will evenly distribute water....
  • Two Methods for Soaker Hose Usage – There are two method to use the soaker hose. Placed on the surface of your soil, the soaker hoses deliver water....
  • Help Plants Growing While Save Water - Soaker hoses provide reliable water delivery at ground level, helping the foliage on your plants remain dry and....
  • Screw Fittings And Easy To Install - The soaker hose fittings are screw fittings. You can screw the end of the hose into the end of either another....
  • Pressure And Length - Ideally, for this type of soaker hose, you are going to want the pressure to be about 10 PSI so that the water drips out of the....
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • 20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
  • Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We of....
Check Stock