Reviews Hose Splice Fittings
ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions
- ...nd pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
- Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
- FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
- Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
- Recommended for older low-pressure systems with mechanical fuel pumps.
- Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
- EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
- PACKAGE CONTENTS: Fuel tester kit gas pressure test gauge package is a comprehensive kit of adapters and fittings.
- Comes with flex hoses, fittings, and instructions for quick reference.
- Includes Brass 1/8"-27 NPTx1/4"-18NPT, Brass 1/4" Barbed x 1/4"-18NPT, Aluminum 1/4" & 3/8 Barbed x 1/8-24NPT, 3 Rubber Hoses 1/4" x 2.5" L, 3/8" x 3.0" L.
Check StockJoyFans Fuel Pressure Test Kit, TU-114 Fuel Injector Pump Pressure Tester Automotive Tool with Gauge Adapter for Schrader Test Port Fuel Injection System on Car Motorcycle Blue Case
- ...ial, ranging from 0-10 bar (0-140 psi) for easy and accurate work on both American and metric systems. High precision 3-1/2" gauge easily holds pressure values and has convenient pressure reset button with 16" drain hose for safe fuel recovery. 15" built-in flexible hose adapter has 300 psi W.P, can be connected to fittings for fuel pressure test..
- Scope of Application: JoyFans fuel injection pressure tester kit covers a variety of gasoline engine cars, motorcycles, trucks, SUVs, ATVs, RVs with modern Schrader test port fuel injection systems but Bosch, CIS Jetronic, Throttle Body System on GM vehicles. Custom-made toolbox bases on the shapes and sizes of all tools to keep them neat and steady with an instruction included for quick size reference. Easy transportation, safe storage, and simple identification..
- Built to Last: Fuel pump tester kit supplies with a full series of precision-machined adapters making it universal for most vehicles. Adapters constructed from high-quality metal comes in a variety of sizes for added suitability. Resisting oil, rust and corrosion, ensures years of reliable use. Hoses adopt reinforced rubber nylon resin, withstand torsion, temperature, and pressure. 8" short hose ends with brass fittings, 2pcs cut hoses size: 1/4"I....
Check StockJIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle
- ...Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
- UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
- 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color coded scale, helps to monitor vehicles' fuel pressure easily. Equip with pressure relief valve and 16" drain hose for safer pressure discharge and fuel recovery. Reliable nylon resin hose is resistant to fuel, wear and corrosion.
Check StockJIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV
- ...esel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
- CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
- FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to release pressure safely and recovery fuel easily. Blow molding case keeps everything in place and protects the gauges during storage..
- CHECK FUEL INJECTOR PUMP PRESSURE: The pressure tester is designed for checking fuel injection pump pressure and fu....
Check StockHeater Hose Fittings 1\\/2 NPT Compatible with 1964-1979 Chevy Chevelle Camaro Nova Impala SBC 283 350 383 Chrome 3\\/4 Water Pump 5\\/8 Intake Mainfold Heater Hose Connector
- Fitment: Heater Hose Fittings Compatible with 1964-1979 Chevy Chevelle Camaro Nova Impala SBC 283 350 383.
- Material: Intake & Water Pump Heater Hose Fittings is Made of high-quality Iron, which is durable,scratch resistant, corrosion resistant and impact resistance.
- Features: Our Heater Hose Fittings are a great choice for connecting heater hoses to your water pump and intake manifold.
- Package Includes: (1) 5/8" Fitting x 1.7913" Length With 1/2-14 NPT , (1) 3/4" Fittings x 2.933" Length With 1/2-14 NPT.
- Please check to make sure you need 1/2" NPT Heater Hose Fittings.
Check StockPOWERTEC 70207 4 Inch Flexible Dust Collection Hose and Fittings Kit
- INCLUDES: (1) Flexible Dust Collection Hose 4” x 12” | (2) Screw End Fittings, (1) Oval Tapered Nozzle and (1) Rectangular Nozzle.
- FUNCTION: A complete dust collector hose kit that possesses a versatile assortment of fittings intended to promote project flexibility and optimal airflow to your dust collection system.
- HARD TO REACH: A flexible hose is designed with a 4” diameter for component compatibility, and a 12” length that can expand up to an impressive 36 inches for out-of-reach applications.
- FITTINGS: Rectangular and oval tapered nozzles provide optimum adaptability with table saws, sanders, drill presses, routers, and other woodworking equipment.
- QUALITY: The hose is made out of polypropylene (PP), with both pliable to rigid profiles – while the fittings are all constructed out of ABS plastic for heavy duty use and long-term durability.
Check StockGarden Hose Washers Pack of 10. Made from Heavy Duty Rubber. Self Locking Tabs Keep Washer Firmly Set Inside Fittings
- Gardenite hose washers are made from heavy duty thermoplastic rubber construction..
- These heavy duty rubber hose gaskets fit all standard 3/4" garden hose fittings..
- Designed with 4 small outer tabs to keep washers in place and properly seated. This prevents washers from falling out of the hose fittings..
- The Gardenite heavy-duty rubber hose washers fit all standard female garden hose fittings..
- Each heavy duty rubber gasket has external diameter of 1 inch, the internal diameter is 5/8 inches and the thickness is 1/8 inches..
Check StockAINEED Hose Repair Kit, 3 Sets Solid Brass Garden Hose Quick Connect Male to Female Connectors, 3 Sets 3/4 Inch Brass Garden Hose Repair Connector with 6 Pieces Stainless Steel Clamps
- [Quick and Easy to Install] These garden hose fittings are very easy to connect and disconnect, quick release allows for easy attach and removal of hose. Convenient quick connect hose adapter provides tight, secure fittings, no-Leak connection.
- [Life Time Warranty] Confident in our products, if for any reason you are not SATISFIED, contact us and our customer service team will help you RETURN or REFUND.
- [Package Includes] Come with 3 sets of brass male and female quick connectors, 3 sets of aluminum garden hose repair kit and 6 pieces rubber washers. This hose quick connect brass set is durable and leak-free for gardening use in all sessions.
- [Sturdy Hose Repair Kit] 3 male & 3 female garden hose repair ends, made of premium aluminum with copper-like color surface, and 304 stainless steel clamps, use for repairing or replacing broken female or male hose connector, water hose end.
- [Durable Material] Made of high quality brass, rust proof solid brass to make sure connector fittings are durable enough with no leaking quality. Quick disconnect fittings allow easy attach and removal of the connector anytime.
Check StockMSCRP Fuel Injection Line Fitting Adapter Kit EFI FI w/Filter/Regulator LS Conversion
- 1Pc 6AN 25 feet of high-pressure fuel injection hose.
- 1Pc 6AN to 3/8" Male Straight Filter Fittings+1Pc 6AN to 5/16" Fuel Filter Return Line Fitting.
- 2Pcs 6AN to 3/8" Fuel Filter Feed Line Fittings+2Pcs -6AN to 1/4" NPT Fuel Pump Adapters+2Pcs 45 Degree -6AN Female to 3/8" Push Lock hose fittings.
- 6Pcs straight -6AN Female to 3/8" Push Lock hose fittings.
Check StockKeg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece
- ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
- USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
- Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
- BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
- Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
- INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
- Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
- To install fittings, pull up lever on ball lock disconn....
Check Stockmistcooling Outdoor Misting System Kit-125ft-30Nozzles Cooling Kit-125, 125 Ft-30 Nozzle
- Tubing: 3/8” OD Flexible PE Tubing, Max burst pressure is 300psi at 75°F, UV Resistant Flexible Tubing, Easy to Cut , Easy to bend. Nozzles: Nickel-plated brass button series, with stainless-steel Orifice, Standard 10/24” thread in, 0.015” OD Orifice, Rust-resistant fixed impeller pin.
- Fittings: 3/8” OD, Compression Fittings, Beige Color to blend with most patios and backyards, Compression Type Fittings, Leak Proof, Fittings Included – Misting Tees, Misting End Elbow , Coupler, Compression Elbow for Corners , and 3/8 Compression Tees to split the mist line. Garden Hose Adapter:3/8” OD, Fits most Garden Faucets, With Filter, Washer to protect your nozzles..
- ¾ Inch “Y” Connector – Hose Splitter : Dual shut-off valve controls water flow , Extra large , plastic handles for easy grip and turn , Easy-on swivel connector prevents hose kinks by allowing hose to turn , 2 Way Y Hose Splitter : The garden hose splitter has 2 Way connectors and 2 valves. After using the water splitter, it easily converts 1 spigot into 2 high flow water sources. It can make your garden life easier..
Check StockJoywayus Brass Hose Fitting,90 Degree Elbow,3/8\ Barb x 3/8\ NPT Male Pipe Water/Fuel/Air (Pack of 2)
- 【Solid Brass】The hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
- 【Package Include】3PCS 5/8"x5/8"x5/8" Brass 90°Included Angle Y Hose Barb Fittings..
- 【Heavy & Thick】Heavy Y shaped brass barbs and thickened wall, higher strength and very rugged..
- 【Solid Connection】The Y shaped hose barb fittings can be solid connected to the hose (Fit hose which ID of 16mm)..
- 【Note】Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage..
Check StockClass A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK
- 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
- WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
- BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
Check Stock