Reviews Hydraulic Fittings Hose
VEVOR Hydraulic Outboard Steering Kit 300HP, Hydraulic Steering Kit Helm Pump,Hydraulic Boat Steering Kit with 22 Feet Hydraulic Steering Hose for Boat Steering System
- Hydraulic Outboard Boat Steering Kit: The hydraulic outboard boat steering kit includes a steering cylinder, a steering pump, a 13.5" steering wheel, and a 22ft hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
- Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
- Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
- Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
- Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offsho....
Check StockNA Black Hydra Krimp 71500 AC Hose Crimper
- The lightweight hand-held hydraulic press is very portable..
- Crimping pipes and fittings in an easy and labor-saving way..
- The kit is applicable for beadlocking fitting and barrier A/C hose..
- The dies snap quickly into the press fixture requiring no pins or screws..
- Wide Application: The hydraulic crimper is ideal for shop and field operations, crimping pipes and fittings in an easy and labor-saving way. Customize....
Check StockJagwire Needle Driver 2.0, Fitting Insert Tool
- Allows for easy and gentle insertion of hose fittings.
- Installing hydraulic hose fittings shouldn't be done using a hammer.
Check StockApache 39004375 1/2\ Male Pipe x 1/2\ Female Pipe Swivel, Hydraulic Adapter
- 10 pack of FJX-08-08 female swivel hydraulic hose fittings..
Check Stock64 Pcs JIC 37° Flare Thread Cap & Plug Assortment Kit Seal Adapter Set for Hydraulic Hose Tube and Pipe SAE AN Fittings Galvanized Carbon Steel with Precision Threading Dash Sizes 4 6 8 10 12 16
- SUPERIOR PERFORMANCE: AquaAulos hydraulic fittings are made to the highest standards, with our JIC cap and plug kit meeting or exceeding SAE J514 conventions. These industrial heavy-duty JIC fittings are made from premium carbon steel galvanized with robust and long-lasting zinc, which prevents rust, corrosion, and degradation, even with extended use. Over time these fittings are exposed to hose fluid, so this durability is essential. You can trust our products like any leading brands, such as Parker, Eaton Aeroquip, or Gates, as they have been rigorously tested and meet the industry standards for pressure, temperature, and material strength!.
- PRECISION-ENGINEERED: We understand the importance of heavy-duty craftsmanship, which is exactly what we strive for in every piece in this kit. Our state-of-the-art CNC machine provides ultra-precise production, ensuring that the caps and plugs are made with fine-tolerance thread with good sealing for easy, repeated installation and removal. This extra attention to the manufacturing process enhances the adapter's performance. It provides customers with a competitive advantage through less downtime and extended equipment life, leading to increased revenues and reduced warranty costs..
Check StockFuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal
- ... line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
- Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
- Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
- The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
- Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
- No Worry To Buy: Excellently Sealed, no leaking. We offer 3-month after-s....
Check StockRaybestos BH380406 Professional Grade Hydraulic Brake Hose
- Raybestos Brake Hose is designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
- This hose meets federal standards to ensure performance and safety, while providing longer hose life.
- It utilizes premium fittings to ensure a good hydraulic seal.
- Designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
Check StockRaybestos BH381116 Professional Grade Hydraulic Brake Hose
- Raybestos Brake Hose is designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
- This hose meets federal standards to ensure performance and safety, while providing longer hose life.
- It utilizes premium fittings to ensure a good hydraulic seal.
- Designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
Check StockPRO BAT Braided Hydraulic Brake Hose Line Pipeline For Chinese GY6 Scooter ATV Dirt Bike Go Kart 10mm Banjo Ends (70''/175cm)
- 70"/175mm Hydraulic Brake Oil Line ATV Quad Go Kart Scooter Cable Hose With 10mm Banjo Ends.
- 70" long --from top to end ,10mm banjo nut fittings.
- Made with high quality heavy duty braided stainless steel.
- Hydraulic Brake Master Cylinder Hose Line Pipeline.
Check StockMardatt 7 Pcs Automobile Hose Remover Pliers and Hook Set Include Brake Line Pinch Pliers, Separator Pliers, Fastener Remover Hook, Pipe Repairing Tool for Auto Radiator Vacuum Hoses Trim O Ring
- ...hoses, transmission lines, heating lines, or any other rubber hose for installation joints in real time..
- 【Multi Function】Work great for removing all kinds of difficult dismantling pipes, such as air pipes, power auxiliary pipes, cooling oil pipes, water pipes, etc. Also perfect for pulling o- rings & gaskets on hydraulic fittings, breaking a seal on a stuck hose, brake hoses/fuel hoses/gas lines/coolant hoses/radiator hoses, lawn mower gas lines and vacuum clamps & hydraulic piston seals, clear out a grease fitting, ect..
Check StockTrackStar Turnigy 13.5T Sensored Brushless Motor 3040KV Roar Approved
- Premium Material: The hydraulic steering helm comes with high-strength aluminum alloy material, which is lightweight, anti-aging, corrosion-resistant,....
- Optimal Hose Fitting: The adjustable stainless steel O-ring fittings will simplify the installation process and allow for simple reorientation after....
- Considerate Details: The hydraulic helm pump is equipped with the replaceable shaft seal, the built-in lock valve, relieve valve, and air pocket.....
- Complete Accessories: The hydraulic steering pump has a complete accessories kit for durable structure. It includes ball bearing piston race,-5 ORB....
- Wide Application: This outboard helm pump is suitable for boats rated to a maximum of 300 HP. It can be used in mechanical/manual steering for yachts,....
Check Stockmarddpair Hydraulic Hose Crimper Manual A/C Hose Crimper Kit Air Conditioning Repaire Handheld Hydraulic Hose Crimping Tool with 7 Die Set Fit for Barbed and Beaded Hose Fittings
- Dies size: The hose crimping tool has complete dies covering hose sizes 6, 8, 10, 12(5/16, 13/32, 1/2â€, 5/8) and reduced barrier 8, 10, 12(13/32,....
- Material: This hydraulic crimping tool is made of aluminum alloy material, ensuring the durability..
- Stamper hardness: Stamper hardness can reach up to 53 HRC, making the crimping effect better..
- Advantage: This tool is easy to operate and save your time and energy. It is light-weight and compact, suitable for narrow space. Always wear safety....
- Application: The hydraulic crimper is ideal for shop and field operations, barbed and beaded hose fittings..
Check StockDometic SeaStar Classic Tilt Hydraulic Steering Kit, HK6400TC-3
- Hydraulic Steering Kit without hoses (ordered separately ho51xx where xx equals hose length in feet).
- Updated System includes Positionable Stainless Steel O-Ring (ORB) Fittings for easy hose routing and NEW End Gland Sealing System for maximum protection from saltwater and compression set.
- 5 turns lock-to-lock with 1.7 Cubic Inch Displacement Helm (included) for maximum steering comfort.
- Robust Barrel design and NEW graphics compliment new boats and motor packages..
- 48 Degrees of Tilt Articulation, 5 Positive Lock Positions and Factory Installed Lubrication ensure Smooth Operation and Feel.
Check Stock