Reviews Hard Gold Finger Pcb

Fenlink 2.5" to 3.5" Internal SSD Hard Drive SATA Drive Converter

  • Fenlink 2.5″ to 3.5″ SATA Drive Converter: Turns your 2.5 inch SATA HDD / SSD into 3.5 inch so you can install it into your desktop PC and Apple Mac Pro models.
  • Superb Quality:Immersion Gold PCB manufacturing process using reasonable PCB layout design, stable transmission rate.
  • Excellent Performance: SATA III standard supports a theoretical maximum speed of 6Gbps, also backward compatible with SATA I/II.
  • Good Heat Dissipation: Open design allows for full air flow for proper drive cooling, Aluminum Alloy frame design and protects your hard drive.
Check Stock

ADT-Link R44SF / R24SF M.2 NVMe SSD Extension Cable Solid State Drive Riser Card Support M2 to PCI Express 3.0 X4 PCIE Full Speed 35G/BPS(R24SF 10CM)

  • Wire advantages: Using the German patent imported wire, using the Lotes connectors which imported from Taiwan, high frequency support PCIe 3.0 X16 8G/bps stable transfer..
  • Cable length: Our wire has a low impedance, the cable below 60cm can be stable at PCIe3.0 full speed reading and writing..
  • Differential signal without hole design, there is no problem of signal attenuation interference in a parasitic capacitance and parasitic inductance, there will be no more CAF micro short circuit, cable is durability..
  • PCB use high frequency low resistance of materials with high quality, PCB using high TG board, copper thickness thicken to 1oz, gold finger plating enough gold, Good conductive performance, can reduce oxidize higher impedance caused by the crash blue screen..
  • R24SF ,Connector 1: PCIe x4 ,Connector 2: M.2 NVMe SSD.
Check Stock

EarMen Eagle High-Performance Portable USB DAC and Headphone Amp - PCM DxD and DSD

  • EarMen Eagle is a high-performance pocket-friendly USB DAC and Headphone Amp. It plays all 32bit/384kHz formats including PCM, DXD and DSD, and is....
  • Featuring Audiophile SABRE DAC - Powered by ESS ES9281, which provides high-end audio performance with distortion plus noise (THD+N) less than 0.002%,....
  • Low-Noise Design - EarMen Eagle uses Super LOW ESR tantalum capacitors, high grade components in the power-supply, and 4 layer gold plated PCB....
  • Gold plated PCB - EarMen Eagle’s PCB is 4 layer gold-plated and manufactured in-house using CNC drilling and pattern plating techniques. This....
  • Design - After many years of experience in the audio industry, our engineers have used their knowledge to develop a device that will provide you with....
Check Stock

Gikfun Mini Solder-able Breadboard Gold Plated Finish Proto Board PCB for Arduino Electronic DIY (Pack of 5PCS) GK1009

  • Breadboard PCB for any type Raspberry Pi GPIO..
  • Gold plated finish prevents oxidation, High quality Gold finish for easy soldering..
  • All holes are through-plated for strength.Hole spacing 2.54mm.
  • 5PCS Mini Gold Plated Finish Solder-able Breadboard PCB Diy Kit.Packed with the high quality box..
Check Stock

IDE to SATA Adapter, Upgrade PCB Hard Drive or Optical Drive Adapter Converter Kit for Sony PS2, IDE Original Network Adapter for Game, Purple

  • ★★【SPECIFICATION】❶Item Type: Adapter❷Material: for PCB❸Color: Purple❹Weight: Approx. 13.0g/0.5oz❺Application: Sony PS2 IDE original network adapter..
  • ★★【SUITABLE FOR SONY PS2】Precise cut, perfect fitness, suitable for Sony PS2 IDE original network adapter..
  • ★★【SATA HARD DISK】A large‑capacity for sata hard disk is used to replace the IDE hard disk to play the game, which will save us a lot of game loading time..
  • ★★【PCB BOARD MATERIAL】High‑quality for PCB board material, with fast operation speed and excellent performance..
  • ★★【EASY TO INSTALL】Equipped with mounting screw pack, which makes it easy to install and detach.Small and lightweight, convenient for us to storage and a good replcement accessory..
Check Stock

EPLZON Gold Plated PCB Solder-able Breadboard for DIY Electronics Projects Compatible with DIY Arduino Soldering Projects 2.05"x3.5" (5 Pack + 2 Mini Board, Black)

  • ✅This board is especially useful for preserving a prototype or experiment you just created on a solder-less breadboard by soldering all the pieces in place..
  • ✅Suitable for a variety of MCU boards, compatible with Arduino Nano, ESP8266, NodeMCU, etc.
  • suitable for various DIP type components.
  • suitable for any type of Raspberry Pi GPIO breadboard PCB..
  • ✅Gold plated finish to prevent oxidation, high quality gold finish for easy soldering,and all holes are through-plated for mounting strength.
  • ✅5pcs 2.05"x3.5" PCB Solder-able Breadboard + 2pcs 2.0"x1.5" mini PCB Solder-able Breadboard for prototyping and transferring,Black.
  • ✅Lead-free and RoHS compliant for longer shelf life.
Check Stock

20 Packs halloween Finger Nail Claw Rings Ancient Queen Fingernail Claw Metal Finger Knuckle Claw for Halloween Women Cosplay Costume Drama Dance Show Gold Silver

  • What you will receive: the package includes 10 pieces of finger tip claws in gold and 10 pieces of finger Nail claw rings in silver, the different....
  • Exquisite appearance: the set of cosplay claws is designed as the fingernail of the queen in ancient times, with a long pointed head and a finish, it....
  • Hard to fade or rust: these claw finger tips are made of quality alloy material, sturdy and not easy to rust, lightweight and skin friendly, they will....
  • Fits most fingers: with a length of 4.8 inches, the slightly open design of this nail claw allows you to slide it onto your finger easily, and the....
  • Suitable occasions: create a personalized look, you can wear the fingernail claws during Halloween and Christmas events, including Halloween night,....
Check Stock

ELECTRONICS-SALON DPDT Signal Relay Module, 12Vdc, RY12W-K Relay. Has Assembled.

  • This item has been assembled, and electrical test passed..
  • Size: 50 x 34.9 x 16 mm (approximately 2" x 1.37" x 0.64"), PCB thickness: 1.6mm..
  • high quality signal relay, FR-4 Fiber glass PCB, darlington transistor driving relay, LED indicator for relay action..
  • Relay Contact Material: Gold Overlay Silver-Palladium..
Check Stock

GeeekPi Electronic Fun Kit,with 3PCS Half Sized Breadboard Cable Resistor LED Potentiometer for Electronic Learning Kit, Compatible with Arduino IDE, UNO R3, MEGA2560, Raspberry Pi Range(Black)

  • This is an entry-level kit that contains DIY solderable PCB breadboards, male and female Pin headers, LED lights, resistor packages, and jumper packages..
  • More than 200 pieces of components, compatible with Arduino IDE, Raspberry Pi and other microcontroller boards..
  • 3PCS Proto Breadboard PCB Board Gold Plated Experimental Breadboard Soldering Board Double-Sided PCB.
Check Stock

CoolerMaster MASTERACCESSORY Riser Cable PCIe 4.0 x16 - 300mm, PCIe 4.0 Compatible, EMI Shielded 30 AWG, Protective ABS Casing for Graphics Card

  • PCIe 4.0 Compatible: While providing twice the bandwidth of PCIe 3.0, the Gen 4.0 riser cable remains backwards compatible with a maximum transfer rate of over 64Gb/s (bi-directional) and fully supports the 16GT/s bit rate of PCIe 4.0 devices..
  • Ultra Durable PCB: The multi-layer coated PCB provides best-in-class performance under high thermal loads, cable flex, and moisture resistance..
  • Heavy Duty Shielding: EMI shielded 30 AWG tinned copper wires ensure minimal signal delay and electromagnetic interference-free operation..
  • Gold-Plated Pin Connections: Gold-plated PCI pins allow maximum durability with a rated 400g of retention force per contact pair..
  • Protective ABS Casing: UV resistant ABS casing protects cable connection points from rough handling..
Check Stock

2021 Fantasy Football Championship Ring With Display Box (11)

  • Please use the size measurements from the product image to measure your finger size before the purchase.
  • Extremely Durable & Safe: ROQ silicone rings are made with safe and breathable silicone that is built to break away at high pressure. The flexibility of this ring makes it also perfect for those with large knuckles or temporary swollen fingers..
  • Tungsten Is Dent & Scratch Resistant - You can file away at it, and it will stay polished forever.
  • Tungsten carbide is 10 times as hard as 18Kt gold, 5 times as hard as steel, and 4 times as hard as titanium.
  • Optimized Dimensions For Men - Tungsten width is 8mm (0.31 inch), thickness is 2mm (0.08 inch).
  • Silicone ring is 8mm(0.31 inch), thickness is 2mm (0.08 inch).
  • Lifetime Warranty. 100% satisfaction guaranteed we are here 24/7 for you!.
Check Stock

DUROCK V2 PCB Mount Screw in Stabilizers, Translucent Smokey Keyboard Stabilizers with 2u 6.25u 7u Wires, Keycap Stabilizers Mechanical Keyboard Stabilizers (V2 Smokey 60/87 Kit)

  • DUROCK V2 Stabilizers are PCB mount screw-in Stabs that feature a patent design and precision upgrade models to avoid wire drop out..
  • The V2 Stabs Stem / Sliders are pre-clipped design, do not require any clipping for fast & easy set up..
  • Well selected Premium Polymer Nylon housings, all the Stainless Steel Wires and hardware are sourced from Korea and with real gold coating..
  • Translucent Smokey V2 housings and the gold-plated Wires set gives your board an elegant and golden edge..
  • DUROCK Stabilizers V2 Compatible with PCBs that use "screw-in" or "PCB Mount" stabilizers. ( Washers, both 6.25u and 7u spacebar Wire included ).
Check Stock

Phone Ring Transparent Cell Phone Ring Holder 360 Degree Rotation 180 Degree Flip Phone Ring Grip Finger Ring Stand Kickstand Compatible Various Mobile Phones or Phone Cases (Transparent)

  • ...ngs for cell phone can be reusable after water clean..
  • CELL PHONE RING HOLDER KEEP LONG TIME TENSION,NO LOOSE:The phone ring grips after 10,000 times using, the ring holder for cell phone still keep to hold up your phones tightly,no loose, phone ring with nice package perfect for your family and friends gift choice..
  • FINGER RING GRIP ROTATION AND ONE-HAND OPERATION EASILYThe finger ring stand 360Rotation and 180Flip fold. The cell phone ring holder can help you adjust your phone different viewing angles to reading, watch videos. The phone ring light for universal phone ring holder kickstand phone allows you one hand operation touch more spots on screen, Anti-drop, a stand etc..
  • PHONE RING HOLDER LIFE-TIME GUARANTEE: LIBOSAUS offers life-time money back guarantee of the cell phone finger ring to ensure 100% satisfaction. If the cell phone ring holder does not meet your needs, we will full refund to you or provide a replacement phone ring.(1 x Rose Gold phone ring,2 x Silver phone ring, 1x Grey phone ring )DescriptionTransparent phone ring stand allow to use beautiful phone case without affecting the aesthetics.
  • Ring phone holder still keep tension after 10,000 times uses. Phone ring can be adjusting 360 degree from any angle..
Check Stock