Reviews Aluminium Pcb

Metal Enclosure, Shielded, Diecast, IP54, Instrument, Aluminium Alloy, IP54, 153 mm, 82 mm

  • Price For: Each Enclosure Type: Instrument Enclosure Material: Aluminium Alloy IP Rating: IP54 NEMA Rating: - External Height - Metric: 153mm External Width - Metric: 82mm External Depth - Metric: 50mm Body Color: Unfinished External Height - Imperial: 6".
  • Product Range: -Description1590P WITH NO PCB GUIDES.
Check Stock

LANDTONE Guitar Pedal Kits Overdrive (OD1) with Pre-drilled1590B Box Hand Made

  • 1.Use this kit build your own high quality Overdrive pedal..
  • 2.The PCB board is well marked and easy Assemble.
  • 3.Use Hand Made 1590B Diecast Aluminium Casing.
  • 4.Factory direct sales, quality assurance, low price.
  • 5.Size: 112mm x 60mm x 32mm / 4.4"*2.36"*1.26".
Check Stock

REGA Planar 1 Plus Turntable with Premounted Carbon MM Cartridge (Matte Black)

  • Built-in phono stage is a high specification pre-amp designed to allow simple connection to a wide variety of products.
  • 23 mm high mass phenolic platter with improved flywheel effect for improved speed stability.
  • Precision brass main bearing offers improved fit and removes stress on the bearing itself.
  • Synchronous AC motor with a new motor PCB and aluminium pulley offering low noise and better speed stability.
  • RB110 tonearm built with Rega designed bespoke ultra low friction bearings.
Check Stock

Gskill F4-4000C18D-16GTZR Memory Card 16GB

  • DDR4-4000MHz (PC4-32000), 16GB (8GBx2), CL18-19-19-39, 1.35 volt, Unbuffered, Dual Channel, with full length RGB LED light bar.
  • Revolutionary RGB LED lighting effect designed to show off your system. Fluid rainbow wave default lighting effect..
  • Completely uncovered, full-length light bar. Highly screened ICs and custom 10-layer PCB for uncompromised overclocking performance..
  • Luxurious hair-line finish aluminium heat-spreaders with aggressive fin design for highly efficient heat dissipation. Intel XMP 2.0 profile support....
  • Chipset: Intel Z270 Platform CPU: Kaby Lake (LGA 1151) Module Height: 44mm / 1.73 in. Module Weight: 69g. Limited Lifetime Warranty.
Check Stock

Yellow Sanwa LB35 Balltop for JLF Joysticks

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

ERGAOBOY CNC 3018 Pro M Wood Carving Milling Engraving Machine,GRBL control 3 Axis DIY plastic Acrylic PCB PVC Wood,Effective Engraving Area 11.8x7.1x1.8\ Inch(300x180x45 mm)

  • Spindle motor knob is useful for small positioning adjustment ,with steady and strong support structure.
  • Can engraving much more materails by spiral flute bits,such as metal,steel,MDF board,solid wood,composite board plywood,stone.
  • MDF board,native wood,PVC,Acrylic, wood,composite board plywood,It can be used widely.
  • Signs,PCB,nameplates,badges,seals,bronzing plate,aluminium alloy,acryplates,ABS resin double color plate,PVC foaming board,indentation plates,signs,construction models,instrument panels,wooden products,etc.
  • If you encounter any problems, please contact us in time, we will deal with it within 24 hours.
Check Stock

ANMBEST 10PCS USB 3.1 Type C Connector 24 Pins Male Female Plug Socket Receptacle Adapter to Solder Wire & Cable 24P PCB Board Support Module

  • [FASTER DATA TRANSFER] Data transfer speed is up to 5Gbps, and Sync movies, music, and more in seconds. It supports up t[FASTER DATA TRANSFER] Data transfer speed is up to 5Gbps, and Sync movies, music, and more in seconds. It supports up to 3 Amps of power output for charging your devices.o 3 Amps of power output for charging your devices..
  • [DURABLE METAL BODY] The converter connector is gathered with aluminium alloy metallic minimalist, ensuring longer life span even plug in and unplug it hundreds of times..
  • Attached with PCB board, convenient for welding and wiring..
  • [APPLICATIONS] Type C interface is widely used in mobile phones, tablets, laptops, and extended data cables, charging heads, mobile power supplies and other digital accessories..
  • Package includes 5 piece male plug & 5 piece female socket..
Check Stock

BRWISSEN S100 Anti Spy Detector Hidden Camera Finder Wireless Bug GPS Tracking GSM Listening Device RF Radio Frequency Scanner

  • 【Comprehensive 】This si4732 all band radio receiver is a FM stereo, AM, LW, SW, SSB world band receiver suitable for global FM broadcast reception.
  • Audio bandwidth filter 0.5, 1, 1.2, 2.2, 3 and 4Khz.
  • 22 commercial and ham radio bands pre configured..
  • 【Technology】ATS-20 radio receiver uses multiple conversion and DSP digital demodulation technology, greatly improving the sensitivity of the radio..
  • 【Tiny and Portable】 Full band Si4732 airband radio receivers lightweight and sturdy components and unique and exquisite design maximize portability. Easily to use with the big tune knob and volume knob..
  • 【Widely Used】 All band Si4732 radio receiver suitable for outdoor camping, listening to radio music in the kitchen, it is a necessary condition for participating in the parade and family life..
  • 【Durable Case】 This portable shortwave radio is made of aluminium alloy , sturdy and strong , the PCB retains the si4735 package, users can replace the chip by themselves, and the software is compatible..
Check Stock

Arcade Fight Stick Street Fighter Arcade Joystick Keyboard control Fighting box PXN X8 For Nintendo Switch/PS4/PS3/XBOX Series X/S/XBOX S/X,PC

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

4X Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY

  • Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY..
  • PCB Dimension: 101.6mm x 53.34mm / 4" x 2.1".
  • PCB Thickness: 1.6mm / 0.063", Material: high quality FR-4 glass fiber PCB..
  • All holes are plated through. Top and bottom side are identical copper layers. Pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..
Check Stock

Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard

  • 【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
  • 【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
  • 【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
  • 【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
  • 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....
Check Stock

G.SKILL F4-3600C16D-16GTZR 16 GB 8 GB x 2 Trident Z RGB Series DDR4 3600 MHz Dual Channel Memory Kit - Black with Full Length RGB LED Light bar

  • DDR4-3600MHz (PC4-28800), 16GB (8GBx2), CL16-16-16-36, 1.35 volt, Unbuffered, Dual Channel, with full length RGB LED light bar.
  • Revolutionary RGB LED lighting effect designed to show off your system. Fluid rainbow wave default lighting effect. SPD voltage: 1.20 volt.
  • Completely uncovered, full-length light bar. Highly screened ICs and custom 10-layer PCB for uncompromised overclocking performance..
  • Luxurious hair-line finish aluminium heat-spreaders with aggressive fin design for highly efficient heat dissipation. Intel XMP 2.0 profile support....
  • Chipset: Intel Z270 Platform / Intel Z170 Platform CPU: Kaby Lake (LGA 1151) / Skylake (LGA 1151) Module Height: 44mm / 1.73 in. Module Weight: 69g.....
Check Stock

Gardner Bender GSW-26 Electrical Door Switch, SPST, Normally On- Mom OFF, 16 A/125V AC, (Repl. for GSW-SK)

  • Tealio switches come in 1 variant. The spring weight is rated at "bottom out" force, not actuation! Our Tealio switches have been tweaked with wobble reduction and improved smoothness compared to regular Gateron linears..
  • 67g - Transparent, Light Teal-Blue Stem, PCB Mount [Linear].
  • Please note that PCB mounted switches can still be used in many plate mounted keyboards. As long as your PCB underneath has 2 extra holes next to the center post, it will support PCB Mounted switches and add extra rigidity to your build. If your PCB does not have the extra holes, then you can simply cut the small plastic legs off to make them Plate-Mount!.
Check Stock