Reviews Thickness Pcb

Keyboard Switch Sound Dampeners Sheet Silencer Foam Silencer Pad for Mechanical Keyboard（96 Layout）

  • 【Product Function】 Using this product can eliminate the cavity sound of the keyboard, increase the thickness of the tone, and reduce the resonance....
  • 【Easy Installation 】Install directly between PCB and steel plate without adhesive. And will not affect the light position of the keyboard..
  • 【Material】Made of soft sponge material, with high-efficiency noise reduction effect, and will not damage your PCB board..
  • 【3mm Thickness】Because the distance between the PCB and the positioning board is between 3mm and 3.5mm, this 3mm silencer pad is the best choice....
  • 【Warm Tips】This silencer pad is drawn based on the actual measurement of the keyboard. It is not manufactured by the original factory and cannot....
Check Stock

Switch Sound Dampeners Sheet Soft Landing Pads Dimple Foam Sponge (87 Layout)

  • 【Product Function】Eliminating cavity sound, increasing sound thickness and reducing keyboard resonance..
  • 【Eliminate Keyboard Noise】Between the installation and the PCB and the steel plate, the steel plate and the PCB are used for clamping, no adhesive is required, and the light position is not affected. It fills the entire keyboard, the soud is thicker , the resonance of the plastic keyboard and the cavity sound are eliminated..
  • 【Switch Sound Dampeners Sheet】This product is a Switch Sound Dampeners sheet, which is placed between the keyboard's circuit board (PCB) and the positioning board. It is a must for keyboard lovers to DIY your keyboard..
  • 【3mm Thickness】Most of the silencer pads are designed based on a standard 1.5mm positioning plate. Due to the processing accuracy of the plate, the space between the PCB and the positioning plate ranges from 3mm to 3.5mm. Regardless of whether the keyboard switch is welded or hot-plugged, the 3mm silencer pad is the best choice..
  • 【Warm Tips】This silencer pad is measured and drawn according to the keyboard entity. It is not produced by the original manufacturer and cannot be guaranteed to be fully fitted. Some of the holes, gaps, and circles may be caused by too many models and brands of the sam....
Check Stock

YMDK Aluminum Brush Finish ANSI Anodized Positioning Board Plate Plate-Mounted for GH60 PCB GK61 GK61x Hot Swap PCB

  • Package Included: 1x plate.There is no screws and copper stand included..
  • Pls note: Original GK61 GK61x GK61xs plastic case can't use this plate directly.Need to replace a GH60 compatible case.
  • This plate is anodized brush finished.It can only use with plate mounted stabilizers.
  • If you use with GK61 /GK61x PCB,can just mount 4-5 switches into the plate corner and then plug to PCB socket totally.After the plate PCB fixed,then mount other switch in 1 by 1 is ok.At last screw plate PCB togehter to GH60 size case is ok with the screws in your case..
Check Stock

FDSF USB 3.1 Type C to Type C Extension Cable 90 Degree FPC FPV Ribbon Flat USB C Cable 3A 10Gbps EMI Shielding, 30cm

  • The PCB is made of high-quality materials with high frequency and low resistance. The PCB is made of precision. The PCB uses high TG plates. The thickness of the copper material is thickened to 1oz. The PCB power circuit is strengthened and the use of 2 5V power core wires is strengthened, so that the transmission current is more powerful. Support up to 3A..
  • The differential signal has no via hole design, the signal is pure, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF short circuit phenomenon, and the product is durable..
  • Product application: GPS navigator, storage device, imaging device, for Pi 4 for MCU development board, built-in USB device to extend the use of , convenient for USB power supply and USB signal transmission of SLR handheld pan/tilt, etc..
  • Cable length Description: The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector..
Check Stock

Electronics-Salon 4X Solderable Breadboard Proto Board PCB DIY Kit for Raspberry Pi 2/3 Model A B A+ B+ Zero

  • The proto breadboard PCB suitable for any type Raspberry Pi GPIO, or other electronic projects DIY..
  • PCB Material: high quality FR-4 glass fiber PCB. Dimensions: 62mm x 88mm / 2.44" x 3.46", Thickness: 1.6mm / 0.063".
  • Top to bottom layer all solder pad holes are plated through, pads grid (pitch) 2.54mm / 0.1", hole diameter 1.2mm / 0.047"..
  • Package included 4x PCBs, 4x 2x20pin pitch 0.1" male headers, 16x M3x10mm nylon standoffs and 16x M3x6mm nylon screws..
Check Stock

Genie Sequencer Board 34019R

  • 【Dimension】 -Size：100mmx75mm/3.94"x2.95"(L*W).
  • 【Material】 -The copper clad laminate is made of FR-4 glass fiber and copper, the number of layers isdouble sided.
  • 【Features】- The copper clad board is resistant to high temperature, is not easily oxidized, is not easily deformed, and is convenient for welding.
  • 【Application】 - PCB circuit boards are very suitable for making PCB circuit boards and models. It is widely used in product development, DIY experiment, maintenance, production, etc.
  • 【Noted】 -The product may be slightly scratched or dirty during transportation, which will not affect its use.
Check Stock

1769-OA16 Compact Ac I/o Output Module in Stock New in Box 1 Year Warranty

  • Taiwan DINKLE fireproof nylon material DIN rail mount carrier(not China low quality carrier), can support width 35mm, 32mm and 15mm rail..
  • Matching PCB Thickness 1.6mm to 2.0mm (recommended 2.0mm)..
Check Stock

ELECTRONICS-SALON DPDT Signal Relay Module, 12Vdc, RY12W-K Relay. Has Assembled.

  • This item has been assembled, and electrical test passed..
  • Size: 50 x 34.9 x 16 mm (approximately 2" x 1.37" x 0.64"), PCB thickness: 1.6mm..
  • high quality signal relay, FR-4 Fiber glass PCB, darlington transistor driving relay, LED indicator for relay action..
  • Relay Contact Material: Gold Overlay Silver-Palladium..
Check Stock

Liftmaster K001A6837 Logic 4 Board Commercial OEM Genuine

  • 【Dimension】 -Size：200mmx150mm/7.87"x5.91"(L*W).
  • 【Material】 -The copper clad laminate is made of FR-4 glass fiber and copper, the number of layers issingle-sided.
  • 【Features】- The copper clad board is resistant to high temperature, is not easily oxidized, is not easily deformed, and is convenient for welding.
  • 【Application】 - PCB circuit boards are very suitable for making PCB circuit boards and models. It is widely used in product development, DIY experiment, maintenance, production, etc.
  • 【Noted】 -The product may be slightly scratched or dirty during transportation, which will not affect its use.
Check Stock

Miuzei PCB Board Prototype Kit for Electronic Projects Circuit Solder Double-Side Board with 40 Pin 2.54 mm Male to Female Headers Connector 2P&3P Screw Terminal Block Solder Flux Solder Wire

  • ⭐【6 Different Sizes PCB Boards】Double Sided Prototype PCB Boards--1 × 9*7cm, 2 × 8*6cm, 5 × 8*2cm and 5× 7*5cm, 5 × 7*3cm, 5 × 5*4cm PCB....
  • ⭐【Convenient for Projects】The upgrate 0.8mm....
  • ⭐【Header Connector】6 pcs 40 pin Male Header, 4 pcs 40 pin Pitch Right Angle Male Headers, 6 pcs 40 Pin Female Header.
  • ⭐【Screw Terminal Block】8 Pcs Screw Terminal Block: 6 pcs 5.08-301-2P and 6 pcs 5.08-301-3P.
  • Pitch: 5.08mm, Rated Voltage: 300V, Rated Current:....
  • ⭐【High Quality & Warranty】Durable Glass Fiber-FR4 Material (Thickness 1.6mm) is A Very Solid and Durable Prototype Circuit Board.
Check Stock

zgs78hh 18V Battery Chip Protect Board Replacement Battery Protection, Circuit Board for Makita BL1830 BL1850

  • 【Dimension】 -Size：200mmx150mm/7.87"x5.91"(L*W).
  • 【Material】 -The copper clad laminate is made of FR-4 glass fiber and copper, the number of layers issingle-sided.
  • 【Features】- The copper clad board is resistant to high temperature, is not easily oxidized, is not easily deformed, and is convenient for welding.
  • 【Application】 - PCB circuit boards are very suitable for making PCB circuit boards and models. It is widely used in product development, DIY experiment, maintenance, production, etc.
  • 【Noted】 -The product may be slightly scratched or dirty during transportation, which will not affect its use.
Check Stock

BowJian 61 Keys Layout Keyboard Foam - 4 Pieces Set of Silencer Pad Silencer Foam Sound Dampeners Sheet - DIY Mechanical Keyboard Tool (Silencer Pad, Switch Pad, Bottom Cotton,Gasket)

  • 【Silencer Kit】- These four pieces of silencer pad silencer foam sound dampeners are to eliminate noise and improve the effect of consumers using mechanical keyboards. This will be an essential tool for those who are keen on DIY mechanical keyboards..
  • 【Product Function】- Silencer pad is placed between the PCB and the positioning plate to reduce cavity noise. The switch pad reduces the gap between switches and eliminates cavity sounds. The bottom cotton eliminates the noise in the cavity between the PCB and the bottom shell of the keyboard and increases the sound thickness. The role of the gasket is also silence the sound..
  • 【Compatibility】- 100% compatible with 61 keys ANSI mechanical keyboard layout. Please note that normal 61-key layout mechanical keyboards do not have no arrow keys..
  • 【Advantage】- These four keyboard foams are made of soft sponge material, which can well protect the mechanical keyboard and switches, reduce noise and enhance the sound thickness of the keyboard..
  • 【Package Included】- 1* Silencer Pad, 1* Switch Pad, 1* Bottom Cotton, 1* Gasket.
Check Stock

Cermant 20PCS 15x18cm Bakelite Prototype Board PCB Printed Circuit Board for Soldering Electronics Project Experiment for Arduino DIY Electronics Experiments (5pcs 15x18cm)

  • Pcb prototype board, the proto boards are in the color of Red.
  • Material: 94HB Bakelite Prototyping Board.
  • FEATURES - The proto boards are thick and single sided. The plated holes are pre-coppered and very solid which make them very easy to solder components on..
  • PACKAGE CONTENT - 5pcs x Universal PCB Board.
Check Stock