Reviews Digital Servo Controller

10 pcs 50cm 3-Pin Servo Extension Cords Cable Lead Male to Female Plug with 19.7inch Wire for RC Futaba JR Servo Connection Parts

  • 3-Pin Servo extension cords cable lead male to female plug..
  • Line length: About 50cm / 19.7inch；Packing quantity:10pcs..
  • This comes in very handy when your servo is further away from the controller than the wire on the servo allows..
  • Male connector on one end goes to controller, female connector mates with servo, allowing it to work in either system or as an adapter between systems..
  • Practical Range: Airplane, Helicopter, Quad Copter / Multi-Copter RC Cars, For Servo Connection or Receiver Connection..
Check Stock

Barnabas Robotics Servo Motor Tester Kit | 180 Degree 9g Servo Motor + RC Servo Tester Controller + 6V Battery Holder

  • [CONVENIENT, ALL-IN-ONE KIT FOR TESTING SERVO MOTORS] Experiment with servo motors with this all-inclusive kit. Includes 9g servo motor + servo tester controller + 6V battery holder at a low price!.
  • [9G Servo Motor] 180 degree range of motion. Includes 3 types of servo horns..
  • [4 CELL x AA BATTERY HOLDER] Fits 4 x AA batteries, which produces 6V for your servo tester and servo motors..
  • [SERVO TESTER] Includes 3 modes to test servo motors or ESC.
  • [GREAT FOR RC APPLICATIONS] Use as a power source for robotics, RC cars, helicopters, planes, boats and or any hobby projects.
Check Stock

Flysky FS-GT3C 2.4GHz 3-Channel 3CH Surface Radio R/C RC Car/Boat Transmitter TX

  • FLYSKY GT3C Radio Controller and Receiver is designed for most of popular rc cars, rc truck, and rc boat, it will work with digital servo, and analog servos..
  • 2.4G Radio Controller Radio Transmitter & GR3E Receiver.
  • Comes with a rechargeable battery a USB charge cable..
Check Stock

Globact RC Digital Servo Tester/ESC Consistency Tester for RC Helicopter Airplane Car(Servo Tester,ESC Consistency Tester,RC Helicopter Tester Tool)

  • 【High Srecision】The RC ESC tester used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds).
  • 【Button The Select】 (Note: the key switch function, circulation patterns) 1. S-1 manual mode (Manual) 2.S-2-bit mode (Neutral) 3.S-3 automatic mode (Automatic).
  • 【Keys Pulse Width】1. 50H analog servo signal cycle 20us frequency 50Hz, 2. 125H digital the steering gear a signal cycle 8us frequency 125Hz,3. 250H Digital Servo signal cycle 4us frequency 250Hz.
  • 【Powerful Testing Function】RC plane servo tester can test the steering gear is able to respond to subtle changes With PPM signal test function in the display.
  • 【How To Use】Digital or analog signal button selects the corresponding servo system and then plugs into the steering servo to avoid damage to the steering servo.
Check Stock

DIYmall HJ Digital RC Servo Tester ESC Consistency Tester Speed Controller for RC Helicopter Airplane Car Motor Throttle Display

  • 1 X HJ Digital Servo Tester / ESC Consistency Tester.
  • 4CH tester servo: It can control 4 servos at the same time.
  • 50H analog servo signal cycle 20us frequency 50Hz,125H digital the steering gear a signal cycle 8us frequency 125Hz.
  • 250H Digital Servo signal cycle 4us frequency 250Hz.
Check Stock

HOBBYMATE Flysky RC FS-GT3C Remote Controller Radio Controller 3 Channel Radio Transmitter & FS-GR3E Failsafe Receiver - for Rc Car Rc Truck Rc Boat

  • FLYSKY GT3C Radio Controller and Receiver is designed for most of popular rc cars, rc truck, and rc boat, it will work with digital servo, and analog....
  • 2.4G Radio Controller Radio Transmitter & GR3E Receiver.
  • Comes with a rechargeable battery a USB charge cable..
Check Stock

ZOSKAY 1X DS3218 Update servo 20KG Full Metal Gear Digital servo Baja servo Waterproof servo for Baja Cars(Control Angle 180)

  • DS3218 20KG Large Torque Digital Servo with precision potentiometers,stable,low noise,waterproof: IP66.
  • High-precision metal gears with hard anodizing, CNC aluminium middle Shell, Dual ball bearings.
  • Large Torque&speed – 18.5kg.cm (0.16S/ 60°)@5V,maximum 21.5 kg.cm (0.14S/60°)@6.8V Operating travel:180°（PWM 500-2500μs）.
  • High performance digital standard servo for any crawler.
  • and for robot joint activities,TRX 4 Traxxas， SMT10 Mega Truck， SCX10 II，ARRMA Nero 1/8…..
  • Package Included: 1 x Digital Servo 1.58x0.79x1.60inch (40x20x40.5mm).
  • Weight: 60g (2.12oz) 1 x 25T Adjustable metal servo arm.
Check Stock

Weytoll 30KG Motor Servo High Torque Metal Gear Digital Servo Waterproof for RC Car Robot Boat with 25T Arm Control Angle 180°

  • 【Motor Servo】- This 30kg servo offers a full range of 180° with metal gears..
  • 【Large Torque】Operat Voltage: 4.8V - 7.4V, no load speed: 0.24sec/60° - 0.17sec/60°, peak stall torque: 29.5kg.cm - 32kg.cm..
  • 【High Quality】- High performance digital standard servo,equipped with strong gears,Dual ball bearings.
  • 【Application 】- Digital servo can be a common use for robots, mechanical arms, climbing cars and remote control toys..
  • 【Accessories 】Connector wire length 12.6 inches(32cm),and also send with a 25T metal servo arm.
Check Stock

4Pcs DS3218 20KG Waterproof Digital Servo with 25T Servo Arm,High Torque Full Metal Gear RC Steering Servo for 1:8 1:10 1:12 RC Toys Model TRX 4 Crawler Truck Mechanical Arm (Control Angel 180°)

  • ✨[ Widely Used ] : Suitable for 1/8, 1/10, 1/12 Scale Crawler Truck, RC Car,robot,Boat,mechanical arms, climbing cars and remote control models..
  • ✨[ High performance ] : High performance digital standard servo with high-precision metal gears with hard anodizing. Dual ball bearings and CNC aluminium middle Shell..
  • ✨[ DS3218MG 20KG Digital Servo ] : Maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V.
  • Dead band is 3μs. Pulse is 500us-2500us..
  • ✨[ Waterproof ] : It is drip-proof servo with waterproof rubber seals screw. But cannot be submerged in water..
  • ✨[Package List ]: 4 X DS3218MG Digital Servo (180°), 4 X 25T Servo Arm. 4 X Accessories..
Check Stock

AGFRC 55KG Digital-Steering-Servo High-Torque Programmable - Full Metal Gear Brushless Servo for 1/8 1/10 RC Models, Control Angle 180° (A86BHM)

  • 【UPGRADED & PROGAMMABLE】This upgrade high torque servo is programmable by the AGF-SPV2/V3 servo programmer (not Include) to change the torque, speed, angle, etc..
  • 【HIGH PRECISION & MONSTER TORQUE】Stable, low noise, dust-proof, advanced linearity and accuracy. The maximum torque of this steering servo is up to 55kg/cm (764oz-in) @8.4V and speed up to 0.110sec/60°@8.4V. Size: 40*20*41.5mm(1.57*0.79*1.63in).
  • 【HIGH QUALITY & PERFORMANCE】Standard 55KG high torque servo equipped with patent reinforced steel gear with PINS, three ball bearing, full Aluminium housing with groove surface for fast heat dissipation, accuracy with precision potentiometer..
  • 【APPLICATION & 180 DEGREE ROTATION】AGFRC RC steering digital servo motor uses high-precision production technology to reduce production deviation and improve product tightness, ideal for 1/8 1/10 Buggy /Monster Trucks/RC car/boat/plane/helicopter/robot..
  • 【SATISFIED CUSTOMER SERVICE】Please read the detail description of this RC car brushless servo motor first, if any ideas about our high torque digital servo, contact us first & We will provide you a better solution, and make you satisfied..
Check Stock

Miuzei 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Car Boat Control with Cable, Mini Small Servos for Arduino Project

  • Application Fields: Miuzei SG90 9G Servo Motor Compatible with Remote Control Helicopters, Micro Robot, Robot Arm and Boats. Support All Kind of R/C Toys and Arduino Experiments.
  • Interface Type: This SG90 Servo Compatible With JR & Futaba Interface. Miuzei Micro Servo 9g no Load Running Speed: 0.09±0.01 sec/60° at 4.8V.
  • Miuzei Micro Servo Motor Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW Signal, Then it Will Be Work Normally.
  • How to Reach 180 degree -- Miuzei SG90 9g Servo Motor Need to Meet 4.8V Power Supply Voltage and 2500usec Pulse Signal, the Angle of Rotation.
Check Stock

JX CLS6336HV 35kg Aluminium Shell Metal Gear High Voltage Coreless Digital Servo for RC Models Helicopter Accs

  • JX ecoboost Servo CLS6322HV high voltage coreless digital servo..
  • High-performance digital standard servo, high-precision and high-precision metal steering gear..
  • Double ball bearings, high torque of 21 kg-cm..
Check Stock

BETU 2Set 25KG (7.4V/2S) High Torque RC Digital Servo，Waterproof Full Metal Gear Servo with 25T Servo Horn（180°）

  • 【Super Large Torque 25kg Servo】Super Large Torque， Maximum torque is up to 25 kg/cm (280.5 oz/in)@7.4V(2s). Very strong, excellent range of motion, and includes a 25T metal horn..
  • 【Excellent Quality steering servo】Equipped with strong copper & aluminum gears,CNC aluminium middle Shell, Less Noise, light weight, Stable and water-proof,Equipped with 1 Pcs 25T Metal Servo Arms.
  • 【Widely Use Digital Servo】The servo (Control Angle 180°) Compatible with 1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat and other remote control models..
  • 【High Torque Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control..
  • 【Metal Servo Servo Standard Size】1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm).
Check Stock