Reviews Servo Control

BETU 35KG Coreless High Torque Servo，Waterproof Servo Compatible with 1/6，1/8, 1/10, 1/12 Truck, RC Car, Metal Gear Servo with 25T Servo Horn（180°）

  • 【Excellent Quality steering servo】Equipped with strong copper & aluminum gears,CNC aluminium middle Shell, Less Noise, light weight, Stable and water-proof,Equipped with 1 Pcs 25T Metal Servo Arm..
  • 【Widely Use Digital Servo】The servo (Control Angle 180°) Compatible with 1/6，1/8, 1/10, 1/12 Scale Clawer Truck, Traxxas, scx10, RC Car / Robot / Boat and other remote control models..
  • 【High Torque Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control..
  • 【Metal Servo Servo Standard Size】40 x 20 x 38.5 mm ( 1.58 x 0.79 x 1.50 in).
Check Stock

ACEIRMC SG90 Servo Motor Micro Servo 9G Servo Motor for RC Robot Arm Helicopter Airplane Remote Control (5 Pcs) (5pcs)

  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on compatible for Arduino ,Raspberry Pi.
  • The SG90 mini servo motor is lightweight, high-quality and lightning-fast.The servo is designed to work with almost all the radio control systems..
  • SG90 Micro Servo Motor compatible for Mini Arduino Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with Cable.
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm).
Check Stock

6 Channel Digital Servo Tester with Over-Current Protection

  • Use high-precision six potentiometers, which can control the corresponding six servos simultaneously.
  • The 0th, 1st, 2nd and 3rd interface have over-current protection to avoid burning out servo due to over-current.
  • The voltage that the controller require should correspond to the voltage required by a servo that you controlled.
  • There is a small button under each knob of controller, press it, the servo will return to the center of the state, the knob can not control the servo rotation.
  • then press it, remove the center of the state, the knob can continue to control the servo rotation.
Check Stock

BETU 35KG Coreless High Torque RC Servo，Waterproof Servo with Full Metal Gear, Steering Servo with 25T Servo Horn（270°）

  • 【Excellent Quality steering servo】Equipped with strong copper & stainless steel Gear, CNC aluminium middle shell, Less noise, light weight, Stable and water-proof..
  • Widely Use Rc Servo】The servo (Control Angle 270°) Compatible with 1/6，1/8, 1/10, 1/12 Scale Clawer Truck, Traxxas, scx10, RC Car / Robot / Boat and other remote control models..
  • 【Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 270 degrees, Excellent linearity, Precision control..
  • 【35KG Servo Standard Size】40 x 20 x 38.5 mm ( 1.58 x 0.79 x 1.50 in).
Check Stock

BETU 45Kg Coreless Servo Motor HV 8.4V, High Torque RC Digital Servo，Full Waterproof Servo, Stainless Steel Gear Servo with 25T Servo Horn（180°）

  • 【Metal Gear Coreless Servo】Equipped with strong copper & Stainless Steel Gears, CNC aluminium Shell, Less Noise, light weight..
  • 【Waterproof Servo】Waterproof performance: IP67 (Please watch the waterproof test video). Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control..
  • 【Widely Use Digital Servo】The steering servo (Control Angle 180°) Compatible with 1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat and other remote control models..
  • 【High Speed Servo Standard Size】1.57 x 0.78 x 1.57 inch(40 x 20 x 40 mm).
Check Stock

9imod 45KG High Torque Servo,Waterproof Servo Motors,Metal Gear Coreless Servo,8.4V HV Digital Servo,Full Aluminum Case for RC Servo 1/10 1/8 Crawler Car

  • 1.Waterproof Servo: IP67 high waterproof grade allows you to play your RC model in drippy environments..
  • 2.High Torque and Voltage Servo:6.0V -8.4V high oprate voltage.This 45kg waterpoof steering servo's maximum torque is up to 45 kg/[email protected],controllable angle range from 0 to 180 degrees..
  • 3.Full Metal Gear Coreless Servo:Equipped with stainless steel gears,full CNC aluminium shell,less noise,light weight.Dual ball bearings.Excellent linearity,high speed servo precision control..
  • 4.Widely Use Servo Motor:Compatible with 1/5,1/6,1/8,1/10,1/12 Scale Clawer Truck,TRX6,scx10,RC Car/Robot/Boat/Mechanical Arm/Quadcopter and other remote control models..
  • 5.Standard Dimension RC Servo: 1.57 x 0.78 x 1.91 inch(40 x 20 x 48.6 mm).
  • Weight:2.65oz (75g).with 25T Metal Servo Horn..
Check Stock

15 Pieces Servo Extension Cables Servo Extension Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car Airplanes (3.9 Inch,5.9 Inch,11.8 Inch,19.7 Inch,23.6 Inch)

  • Wide application: these servo extension s are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
  • Appropriate sizes: the servo extension cord measures approx. 3.9 Inch, 5.9 Inch, 11.8 Inch, 19.7 Inch, 23.6 Inch in length, different size for your use, the color is black and red.
  • Package includes: this package includes 15 pieces of male to female servo extension cables, enough quantity for you to use and replacement, providing more convenience for you.
  • Feature: this male to female servo extension cord featured with female connector on one side, and male connector on the other side, can be connected to the receiving set and steering engine.
  • Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control, which is male to female.
Check Stock

BETU 35kg Waterpoof Servo, Full Aluminum Case and Stainless Steel Gear Servo, High Torque Servo Compatible with 1/6，1/8, 1/10, 1/12 RC Car/Robot/Boat

  • High Torque Servo：This 35kg Waterpoof Servo's maximum torque is up to 35 kg/cm@7V, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat..
  • Waterpoof Servo: Waterproof performance IP67. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control..
  • All metal servo: Equipped with full aluminum case and stainless steel Gear, CNC aluminium middle shell, less noise, light weight, higher operating accuracy..
  • Product Dimension: 1.57 x 0.78 x 1.57 inch(40 x 20 x 40 mm).
  • With one 25T adjustable metal servo arm, one 25T round type servo horn and one set of accessories..
  • Great digital Servo for people who are interested in developing software for robot parts, Such as mechanical arm, Quadcopter Drone and other remote control equipment..
Check Stock

RC Servo Tester Centering Tool ESC Motor Checker Built in BEC 3CH High Precision for Airplanes Remote Control Models

  • The Mini ECS Motor Servo Centering Tool can easily detect the clearance, jitter and median of a kind of Servo ..
  • With Good stability and high accuracy,could connect the ESC and test the working status of the ESC or Motor easily..
  • It is able to connect three sets of servo or ESC at the same time, use SCM to control..
  • Power Supply:ESC built-in BEC or UBEC(4-5 pcs of #5 battery) to Provides power to the tester..
  • FPV Drone RC Servo Tester High Precision ECS Motor Servo Centering Tool for Remote Control Models RC Airplanes..
Check Stock

KST DS215MG Micro Digital Servo

  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • It is tiny and lightweight with high output power..
  • Compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats..
Check Stock

Thunder Tiger RC Rudder Servo Gear Set Innovator

  • ☆【QUALITY METAL GEAR】：Using high-quality hard alloy materials, equipped with metal gears, the RC gear servo kit has high precision and is not easy to jam.
  • ☆【HIGH-STRENGTH ALUMINUM FRAME】：Using high-quality all-aluminum frame, and after precision processing, the RC gear servo kit is strong and not easily deformed.
  • ☆【HIGH OPERATING EFFECIENCY】：The RC gear servo kit has high operating efficiency, low noise, low power consumption, and is easy to install and disassemble.
  • ☆【WITHSTAND HIGHER LOADS】：RC gear servo can withstand higher loads and ensure the normal operation of the server, effectively improving the performance of RC cars.
  • ☆【5 SIZE SERVO ARMS】：There are 5 different servo arms in the RC gear servo kit package, which can meet your different needs, suitable for 1/10 1/12 remote control car RC off-road vehicle.
Check Stock

TecUnite 20 Pieces 3-Pin Extension Cable Cord Female to Male Wire Connectors for Servo Extension Connection Control Board Remote Control Parts(4 Sizes)

  • Servo extension cord sizes: have 4 different lengths of 10 cm/ 3.94 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch and 50 cm/ 19.7 inch, each length has 5 pieces servo extension cords.
  • Application: these servo extension leads are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car.
  • 3-Pin servo extension wire: each servo extension has 3 pieces of 0.08TS wires, universal model.
  • Connectors with 3 pins and have an angle in case you will install incorrectly, convenient for use.
  • Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine.
  • Package includes: 20 pieces of female to male servo extension cable wires with 4 different lengths, enough for you to use on different occasions.
Check Stock

Dorhea 5 Pcs SG90 Micro Servo Motor Mini Servo SG90 9g Servo Kit Compatible with RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control

  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • Mini servo SG90 is tiny and lightweight with high output power..
  • SG90 servo motor compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • SG90 9g servo support Arduino,Futaba, JR, Sanwa and Hitec remote system..
Check Stock