Reviews Z Wave Garage

2gig GD00Z-5 Z-Wave Garage Opener Door Contact Sensor Black

  • Go control Z-wave products provide up to 100 feet range between the wireless controller and/or the closest Z-wave device.
  • Nortek security & control/go control has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide....
  • Add Z-wave control to your current garage door opener. Compatible with virtually any automatic garage opener w-section garage door.
  • Linear Z-wave products provide up to 100 feet range between the wireless controller and/or the closest Z-wave device.
Check Stock

Zooz 700 Series Z-Wave Universal Relay ZEN17 for Awnings, Garage Doors, Sprinklers, and More | 2 NO-C-NC Relays (20A, 10A) | Signal Repeater | Hub Required (Compatible with SmartThings and Hubitat)

  • ...sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel. Use the inputs to trigger the outputs automatically..
  • AUTOMATE ANYTHING: Add Z-Wave connectivity to up / down DC motors in screens, motorized blinds, or awnings. Perfect to automate your garage door opener (use a single ZEN17 to control up to 2 garage doors independently), commercial gates, gas fireplace, sprinklers, doorbell, outdoor lighting, pool pump, whole house fan, and any 1-240 V device up to 20 A..
  • QUICK INSTALLATION: Power it with a 12-24 V AC/DC power source or a standard USB C cable (included) and a power supply (sold separately). Wall-mount ready. Jumper wires NOT included. Do NOT power with 110 V!.
  • NEW 700 Z-WAVE: Enjoy better signal coverage and a stronger Z-Wave repeater for your mesh network with the latest 700 series chip. It comes with S2 authenticated security and SmartStart for easy pairing. Remembers and restores on/off status after power failure. Built-in auto-on and auto-off timer available if your hub supports advanced settings. The device is ETL certified and conforms with North American safety standards..
Check Stock

Minoston Z-Wave Outdoor Dimmer Plug, Outdoor Smart Outlet Switch, Z-Wave Hub Required, Weatherproof, Built-in Repeater, Work with SmartThings, Wink, Alexa, Black(MP22ZD)

  • 0-100% Dimming and Voice Control: This Z-Wave outdoor dimmer for string lights can adjust the light brightness from 0-100% by voice commands. Just say:“Hey Alexa, set the led strip lights to 75%”..
  • Ideal for Outdoor: IP65 weatherproof housing. Ideal for Garden, Backyard, Kitchen, Bathroom, Porch, Balcony, Garage, Basement, Patio or Electric grill, Sprinkler, Washing machine, Christmas tree, landscape lighting, fountains, lamps, pumps, and other outdoor or indoor-use electric appliances..
  • Schedule and Timer: You can set automatic daily timers or create on/off routing so that the Z-Wave plug can turn on and off automatically. And saving energy when the plugged-in appliances are not needed or are left on by accident..
  • 400W Max Power Z-Wave Dimmer Plug: The Z-Wave plug-in smart dimmer plug works with dimmable string lights in LED, INC bulb. Please make sure your string lights are dimmable and the total power is less than 400W. 150W Max for LED/CFL, 400W Max for Incandescent..
Check Stock

Wireless Z-Wave Multi-Input/Output Dry Contact Bridge Cert ID ZC08-16040002

  • BEFORE YOU BUY: Check to make sure your home automation controller / security panel is interoperable with our device. NOT ALL Z-wave Controllers are....
  • One 24VDC / 110 VAC Relay to control any low voltage device via Z-wave. Controls garage doors, motorized shades, gates, solenoid valves, etc. Relay....
  • One SIGNAL Input terminal block to receive low voltage (digital, analog, or pulse) signals via Z-wave. Use with reed sensors, contact sensors, door....
  • 9V AC power adaptor included. Low voltage wire is NOT included.
  • Please visit our website and youtube page for application details and how-to video's. Wiring diagrams are also downloadable on our website product....
Check Stock

Zooz Z-Wave Plus S2 MultiRelay ZEN16 for Garage Doors, Sprinklers, Gas Fireplace; 3 Dry Contact Relays (15A, 15A, 20A); 12-24 V AC/DC or USB C Power; Signal Repeater; Hub Required

  • VERSATILE APPLICATIONS: Great to automate your garage door (up to 3 doors with just 1 MultiRelay!), commercial garage doors at your business, gas fireplace, sprinklers, doorbell, landscape lights, pool pump, whole house fan, and any 1-240 V device up to 20 A..
  • DIY INSTALLATION: Power it with a standard USB C cable and a 5V power supply (do NOT use USB chargers or Apple accessories) or 12-24 V AC/DC power source. Wall-mount ready. Power adapter or USB cable NOT included. Jumper wires NOT included. Do NOT power with 110 V! Do NOT apply Voltage to the input (switch) terminals!.
  • RELIABLE Z-WAVE: Comes with the latest S2 security and a powerful Z-Wave Plus signal repeater to boost your network. Remembers and restores on/off status after power failure. Built-in auto-on and auto-off timer available if your hub supports advanced settings. The device is ETL certified and conforms with North American safety standards..
  • HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an open Z-Wave hub to display correctly. It was tested to work well with Hubitat, Vera, openHAB, and on SmartThings with a custom device handler (please go to Zooz support page for details). ADT Pulse, Vivint, Wink, and Ring all offer partial control (one relay or all at once inst....
Check Stock

LYNX Touch 7000 Control System by Honeywell 7\ full-color touchscreen WiFi ZWave compatible

  • ...ven if the system is tampered with during the entry and communications delay times. APL can be selected when using a Honeywell GSM or IP communicator. Voice announcement of system and zone status Family message center (for user recorded messages) Works with Honeywell Total Connect - Remote control of security, garage doors and Z-Wave devices - Selected event notifications Voice chime by zone 10 selectable chime tones Automatic stay arming 48 user codes (Installer, Master, plus 46 Secondary, including Duress and Guest) Three panic functions Wall or desk mount Viewable event log stores up to 256 events Exit error feature (detects difference between an actual alarm and exit alarm caused by leaving a door open after the exit delay expires) Case tamper RF jam detection Quick Exit feature provides users with an exit delay after arming their system Night Stay and Silent Exit modes Hinged cover for easy installation Real-time clock display Garage Door Function - Up to four garage doors per system - Unique garage door icon - View and monitor garage door status - Auto-secure feature - Remote notification via Honeywell Total Connect - Garage door control* - Automatically control door via scenes, rules and schedules - Locally open/close garage door from tou....
Check Stock

Aeotec Range Extender 6, Z-Wave Plus repeater

  • Z-Wave Plus wireless signal repeater and range extender. Compatible with Z-Wave and Z-Wave Plus..
  • Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices..
  • Plug in to 110 volt wall socket. Small design so it does not block other outlets.
  • Compatible with all Z-Wave gateways including Control4, Fibaro, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-16095239DescriptionYou use Z-Wave to manage your smart home. You use Range Extender 6 to keep Z-Wave reliable. Aeotec's Range Extender 6 works seamlessly to amplify and repeat weak Z-Wave and Z-Wave Plus signals. Simply plug it into a power socket, connect it to your Z-Wave network, and it automatically starts improving any poor Z-Wave signals that are in range. As it's custom desgined as a wireless signal booster, Range Extender 6 performs better than other Z-Wave devices that offer simply repeating.
  • it amplifies the signal too. Designed to use Z-Wave Plus, unlike previous editions Range Extender 6 can work with advanced Z-Wave features such as encryption and security devices such as door locks while remaining compatible with older versions of Z-Wave. It repeats signals 250% faster than other signal repeaters and can repeat Z-Wave signals up to 492....
Check Stock

Minoston Z-Wave Plus Smart Plug, Outdoor On/Off Outlet Switch, ZWave Hub Required, Weather-Resistant, Built-in Repeater, Work with SmartThings, Wink, Alexa, Black(MP22Z)

  • ...neywell, 2GIG, Hubitat(change device type). ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS！Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • Ideal for Outdoor: IP65 Weather-resistant housing. Ideal for Garden, Backyard, Kitchen, Bathroom, Porch, Balcony, Garage, Basement, Patio or Electric grill, Sprinkler, Washing machine, Christmas tree, landscape lighting, fountains, lamps, pumps, and other outdoor or indoor-use electric appliances, etc--should not be exposed directly to rain or immersed in water..
  • Schedule and Timer: You can set automatic daily timers or create on/off routing so that your devices can turn on and off automatically. And saving energy when the plugged-in appliances are not needed or are left on by accident..
  • Work with: MP22Z outdoor smart plug designed for use for or Electric grill, Sprinkler, Washing machine, Christmas tree, landscape lighting, fountains, lamps, pumps, and other outdoor or indoor-use electric appliances, etc..
  • How to set up: Pair it with your hub and plug in the device you want to remote control. Now you can use your cellphone to turn the device on/off, schedule an event and group the things you want to control together..
Check Stock

GoControl WD500Z-1 Z-Wave 500-Watt Wall-Mount Dimmer Switch

  • Z-wave & Manual Control For Connected Lights.
  • White.This device requires a neutral connection.
  • Easily replace existing standard switch to add a Z-Wave controlled lighting dimmer. Compatible with any Z-Wave certified gateway.
  • Linear Z-Wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device.
  • Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg.. of Z-Wave products.
  • Compatible with incandescent and most dimmable fluorescent, halogen, Xenon and LED fixtures and The wires are pre-cut for easy stripping..
Check Stock

Peanut Butter SmartSticks 3 Pack Bundle

  • LATEST Z-WAVE TECH: SmartStick+ Includes a 700 Series Z-Wave Module (v7.17x firmware) and is Z-Wave Plus V2 Certified.
  • SUPPORTS Z-WAVE S2 SECURITY: Includes Smart Start Inclusion (Requires Smart Start Compatible Hub or Software).
  • Z-FLASH COMPATIBLE: Works Nicely with HomeSeer Z-Flash OTA Firmware Updater.
  • Z-WAVE PLUS (V2) PERMORMANCE: Longest Range, Fastest Transmission Speed, Best Bandwidth.
  • SUPPORTS NETWORK BACKUP & RESTORE: Easily restore or move your network to another SmartStick+ (requires HomeSeer hub).
Check Stock

Zooz 700 Series Z-Wave Plus S2 USB Stick ZST10 700, Great for DIY Smart Home (Use with Home Assistant or HomeSeer Software)

  • READ BEFORE YOU BUY: The Z-Wave stick is for advanced users only, NOT for beginners. You must be comfortable with programming and have expert computer and Z-Wave knowledge to use this device..
  • S2 SECURE NEW 700 SERIES Z-WAVE PLUS: Take advantage of the new 700 Series Z-Wave with more range and S2 authenticated security protocol. It means that you can fully benefit from your S2 sensors, switches, and plugs running on the latest Z-Wave chip..
  • WHAT YOU NEED: This S2 700 Series Stick adds Z-Wave Plus capability to your DIY smart home set-up. You'll need a dedicated computer (PC, laptop, or Raspberry Pi, sold separately) and home automation software of your choice (not included) to complete the system..
  • ADVANCED Z-WAVE: Works great with the most popular software like Home Assitant (with JS), Indigo, and HomeSeer. Supports OTA firmware updates (works with Aeotec OTA firmware tool) and and all of the latest Z-Wave library commands..
  • SMART START: Supports the new quick and extra secure Z-Wave pairing method. Just scan the QR codes from any SmartStart Z-Wave Plus accessories to your home automation interface and power them on. They'll join automatically. Make sure your smart home software supports this feature..
Check Stock

Aeotec Range Extender 6, Zwave Extender, Z-Wave Plus Repeater, 2 Pack

  • Z-Wave Plus wireless signal repeater and range extender. Compatible with Z-Wave and Z-Wave Plus..
  • Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices..
  • Plug in to 110 volt wall socket. Small design so it does not block other outlets.
  • Compatible with all Z-Wave gateways including Control4, Fibaro, SmartThings, Vera and more..
  • Z-Wave Plus certified. Certification number: ZC10-16095239.
Check Stock

HomeSeer HS-DS100+ Z-Wave Plus Door/Window Sensor

  • 3 in 1 Zwave Sensor: Door and window sensor, temperature sensor and humidity sensor 3 in 1. Protect your home by detecting accidental opening/closing of doors, windows, cabinets and drawers. Check the battery level of the device, temperature and humidity through the app..
  • Safe and Reliable: Built-in Z-Wave 700 series, Z-Wave Plus V2, faster wireless speed, longer battery life and longer range than Z-Wave 500 series. SmartStart included, with standard S2 security features, is not only easy to install (auto-recognition via a quick scan of a QR code), but also secure..
  • Long-Life Battery: This smart sensor is powered by a CR2450 battery (battery included, no need to bring your own). The lifespan is 3 years. The sensor’s power saving mode extends battery life compared to other sensors..
  • Customized Events: Personalize how your Z-Wave devices talk to each other: when the front door is opened in the evening, automatically turn on the welcome lights. When a backdoor is opened unexpectedly, trigger a Z-Wave alarm siren..
  • Z-Wave Hub Compatibility: This z-wave door sensor works with certified Z-Wave gateways, Fibaro, SmartThings, Vera..
Check Stock