Reviews Working Current

Square D EHB14020AS Remote Control Circuit Breaker, 20A, 1-Pole, 277V

  • PARAMETERS: Rated Working Voltage: AC100V-240V.
  • MULTI FUNCTIONS: This circuit breaker has voltage, current, power threshold setting, adjustable leakage parameters, electrical parameters, reading of electrical degree measurement, powerful current statistics function..
  • SENSITIVE SIGNAL: The circuit breaker with high sensitive signal acceptance meets various environmental requirements, remote control of electrical equipment such as homes, schools, shopping malls, offices, irrigation farms, water pumps, rental houses, etc..
  • DATA DISPLAY: The computer can be connected with the RS485 port of the switch, and the parameters such as voltage, current, active power, reactive power and leakage value can be read while controlling the switch..
  • AFTER-SALES GUARANTEE: Please feel free to contact us for any questions, and we will do our best to help you!.
Check Stock

Max 300A Continuous Duty Solenoid Relay Nickel-Plating For Golf Carts, Winch, Marine In Rush 12VDC

  • Resistance is 14Ω, Capacity is 10.2W, Contacts:Normally Open (NO)/ 12VDC WITH 2 COPPER POINT.
  • Replaces:70-111224,3635820, 1114208, 1114218, 1114223, 1114534, 1114547/ Bracket:Straight.
  • Spst, One circuit: Off - On, Bracket mounting:Holes 5/16 x 19/32 2-13/64 on center.
  • Our Coil Roll is using 180℃ copper wire, Cover is Nickel-Plating, Meet Environmental Plating Requirment, And Avoid Rusting, Shining.
  • Max Transient current can be 300A, but Continuous Working Current recommend under 150 Amp/ WARRANTY: Life Long Warranty and Free Return and Full Refund.
  • Note: Normally Make 80A as Working Current, Need Break 5 sec on, 50 min off -/ If u need a long working one, pls note us..
Check Stock

LANTRO JS RF WideBand Amplifier 433MHz 22dB High Gain Low Noise LNA Amplifier

  • 【Product Parameters】- Working Voltage: 3---5V.
  • Protect-----This strong heavy duty tool bag can protect your tools from water and dust.
  • 【Scope of Application】- The product can be applied to various RF receiving front ends, used for shortwave, FM broadcasting, remote control receivers, cable TV signal amplifiers and other RF signal amplifications that require low noise.
  • 【Excellent Performance】-The radio frequency amplifier is made of high-quality electronic components and has the advantages of high gain, low noise figure, etc.
  • 【Low Noise】- The noise factor is as low and 0.55dB, which is quite small.
Check Stock

VGEBY ESC XT60 Electronic Brushless Speed Controller 30A for RC Drone RC Airplane Helicopter(3.5mm Bullet Plugs)

  • * Smooth Control-- The singlechip microcomputer adopts an independent voltage regulator chip, which avoids the power interference caused by the BEC load change and improves the working stability..
  • * High Efficiency-- The output MOSFET power tube is equipped with an independent heat sink to reduce the temperature rise of the device and improve the high current working capability of the system..
  • * Good Antiinterference-- The power input terminal adopts ultralow impedance and largecapacity electrolytic capacitor, which improves the antiinterference ability..
  • * 30A Current Operation-- Made of high quality electronic components, dependable to use. Features 30A continuous current and 40A peak current..
  • * Applicable for-- Practical accessory for RC remote control drone, helicopter and FPV, etc. Easy to install, no complicated operations required..
Check Stock

Pond Boss PF140 70 To 140 GPH Fountain Pump

  • Input voltage: DC 3V Working Current: 80MA, Maximum lift: 45-50cm, Maximum flow: 90-100L/H, Power:0.36w.
  • Input voltage: DC4.5V, Working Current: 150MA, Maximum lift: 45-50cm, Maximum flow: 90-100L/H, Power:0.91w.
Check Stock

DC Buck Converter, DROK DC to DC Step Down Power Supply Module 10V-65V to 0-60V 0-12A Adjustable Voltage Regulator Transformer Board with LED Display for Volt Reducer

  • ...LED display, which can show real-time voltage, current, capacity and time..
  • 【Constant Current and Voltage with Indicator Lights】This volt transformer board can set constant output voltage and constant output current by the key buttons. Also, the module is equipped with working status indicator lights, which are output OUT, constant voltage CV and constant current CC respectively, so that the working status can be checked in real time..
  • 【Auto Output and Button Lock Mode】Automatic output can be set after power on. And The parameter adjustment button can be locked to prevent misoperation to adjust the output voltage and current parameters..
  • 【Cooling fan and cooling pad】This adjustable power supply converter is equipped with cooling fan and cooling pad which can keep it cool when it’s too hot..
Check Stock

Universal Wireless Bluetooth Keyboard Multimedia French Azerty Keyboard 6-Led Color Backlit with Multi-Touch VZ5

  • Universal Wireless Bluetooth Keyboard Multimedia French Azerty Keyboard 6-Led Color Backlit With Multi-Touchproduct Model Specification：Item Type: French Azerty Bl.
  • uetooth Keyboard.Bluetooth Version: Bluetooth 3.0.Lithium Battery: 500Ah.Number Of Keyboard Keys:78 Keyssearch For Bluetooth Name: Bluetooth Keyboardoperating Dist.
  • ance Available: 10 Metersmodulation System: Gfskoperating Voltage: 3.0-4.2Vworking Current: &Lt.
  • 8Ma(When The Touchpad Is Working)Standby Current: &Lt.
  • 40-Uacharging Current: 100Ma/200Ma(Backlight)Standby Time: &Gt.
  • 100 Dayscharging Time: 2-3 Hourslithium Battery Capacity: 220Ma/480Ma(Backlight)Sustain.
  • able Working Time: More Than100/30 Hourslithium Battery Life: 3 Yearskey Strength: 80 ±10Gkey Life: 5 Million-Stroke Operating Temperature:-10℃±55℃Product Size 24..
  • 2 X 16.9 X 0.6Cmproduct Weight 227.9Gpackag Size 27.2 X 17.5 X 1.5Cmpackag Weight 281.1Gpackage List:1 X Bluetooth Keyboard1 X Charge Cable (50Cm)1 X English Manua.
Check Stock

8PCS L298N Motor Drive Controller Board Dual H Bridge DC Robot Stepper Motor Compatible with Ardu-ino Electric Projects, Smart Car Robot

  • Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
  • The L298N driver module, using L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface, you can chip circuitry to 5V power supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential..
  • Terminal driver part of the supply area VMS: +5V ~ +35V.
  • Drive part of the peak current Io: 2A / Bridge.
  • Logical part of the terminal power supply range Vss :4.5-5 .5V.
  • Logical part of the operating current range: 0 ~ 36mA.
  • The control signal input voltage range: 4.5-5.5V low 0V high.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
  • High working power to 46v, large current can reach 3A MAX and continue current is 2A, power to 25w..
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability, large capacity filter capacitance,afterflow protection diode, more stable and reliable..
Check Stock

Stylemafia Max 300A Continuous Duty Solenoid Relay Nickel-Plating for Golf Carts, Winch, Marine in Rush 12VDC

  • Resistance is 14Ω, Capacity is 10.2W, Contacts:Normally Open (NO)/ 12VDC WITH 2 COPPER POINT.
  • Replaces:70-111224,3635820, 1114208, 1114218, 1114223, 1114534, 1114547/ Bracket:Straight.
  • Spst, One circuit: Off - On, Bracket mounting:Holes 5/16 x 19/32 2-13/64 on center.
  • Our Coil Roll is using 180℃ copper wire, Cover is Nickel-Plating, Meet Environmental Plating Requirment, And Avoid Rusting, Shining.
  • Max Transient current can be 300A, but Continuous Working Current recommend under 150 Amp/ WARRANTY: Life Long Warranty and Free Return and Full Refund.
  • Note: Normally Make 80A as Working Current, Need Break 5 sec on, 50 min off.
Check Stock

MELIFE JSN-SR04T Integrated Ultrasonic Module Distance Measuring Transducer Waterproof Sensor Module for Arduino

  • Come with a waterproof sealed emitter. This sensor is suitable for outdoor applications such as car reversing sensors, security alarms, industrial inspection, etc..
  • Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions. Please note that the device is waterproof, but it couldn't work underwater..
  • Working voltage: DC 5V, Static current:5mA, Total current work: 30mA. Working range: 25cm-4M, Working frequency: 40KHZ, Detecting angle: 70 degree..
  • The module has a variety of modes that can be modified manually, suitable for testing and teaching experiments in different occasions..
  • Widely Application: Horizontal distance messurement, Obstacle avoidance, automatic control, Traffic control, Security, industrial control..
Check Stock

HiLetgo 2pcs JSN-SR04T Integrated Ultrasonic Module Distance Measuring Transducer Sensor Waterproof for Arduino

  • With a waterproof sealed emitter. This sensor is suitable for outdoor applications such as car reversing sensors, security alarms, industrial inspection, etc..
  • Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions. Please note that the device is waterproof, but it couldn't work underwater..
  • Working voltage:DC 5V, Static current:5mA, Total current work: 30mA. Working range: 25cm-4M, Working frequency: 40KHZ, Detecting angle: 70 degree..
  • The module has a variety of modes that can be modified manually, suitable for testing and teaching experiments in different occasions..
  • Application: Horizontal distance messurement,Obstacle avoidance, automatic control, Traffic control, Security, industrial control..
Check Stock

INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max

  • 【Mini Split Base Current Transformer】It's the smallest one compared to the similar products (output 100MA).Current Transformer, 100A 100mA AC Current Sensor, Split Core Amp Transformer Sensing Relay, Mini Clip-on Easy to Install CT Without Power Off. current sensor structure sensor.
  • 【Professional Use】Current transducer used for energy meter in special.
  • AC 220v, 380v power supply can both be applied.plit Core Current Transformer,AC Current Sensor,Output Class Analog Sensor,Working Principle Magnetic Sensor, Useful for Measuring Whole Building Electricity Consumption.current sensing relay isolation.
  • 【Good Mechanical Properties】Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
  • 【Snap Joint Structure】The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
  • 【Easy to use】When you fix the energy meter, you don't need to cut off the power if you use this product. Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter.ac transformer amp meter amp tester.
Check Stock

Motor Controller, DROK PWM DC Motor Speed Controller 10-50V 60A High Power HHO RC Driver PWM Controller Module 12V 24V 48V 3000W Extension Cord with Switch

  • Parameter: DROK DC motor controller operating voltage range is DC 10-50V, max rated current is 60A, control power range is 0.01-3000W, working temperature range of -20℃-40℃..
  • High-end Configuration: Our motor driver control board uses PWM modulation system to adjust light & speed. In addition, it is designed with radiators to doing heat dissipation created by MOS tube..
  • Convenient Speed Control: With wires to connect potentiometer and regulation switch to control the speed, it is convenient to use..
  • Low Quiescent Current: our speed regulation module is designed with low quiescent current 0.04A(When the working voltage is DC10V-50V, the quiescent current cannot exceed 40mA)..
  • Wide Application: our motor driver control board can be applied to universal DC brush motor speed regulation.
  • production line conveyor belt speed regulation.
Check Stock