Reviews Current Amplifiers

Sundown Audio Salt Series Monoblock Digital Class-D Amplifier (Salt-8 8000W Rms)

  • Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock

Harmony Audio HA-A1500.1 Car Stereo Class D Amp Mono 3000 Watt Subwoofer Amplifier - 1 Ohm Stable - Includes Bass Remote

  • Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock

BOSS Audio Systems Elite BE1500.1 Monoblock Car Amplifier - 1500 Watts, 2 4 Ohm Stable, Class AB, Mosfet Power Supply, Great For Subwoofers

  • POWER: 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms.
  • CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • MOSFET POWER SUPPLY: A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss And eliminating all secondary feedback circuitry.
  • VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • SWITCHABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

Pump Boys and Dinettes

  • Power – 450 Watts Max x 4 @2-Ohms, 225 Watts Max x 4 @4-Ohms, 900 Watts Max x 2 Bridged @4 Ohms.
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Mosfet Power Supply – A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
  • Variable BASS Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s).
  • Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels.
  • Specs – Dimensions: 13.5” x 10.31” x 2.25, Weight: 12 lbs..
  • Warranty – BOSS Audio Systems provides a powerful 6-year Platinum Onli....
Check Stock

BOSS Audio Systems PT1000 2 Channel Car Amplifier - 1000 Watts Full Range Class A/B 2-8 Ohm Stable Mosfet Power Supply Bridgeable

  • Power - 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock

BOSS Audio Systems PF1800 4 Channel Car Amplifier - 1800 Watts Full Range Class A-B 2-4 Ohm Stable Mosfet Power Supply Bridgeable

  • Power - 450 Watts Max x 4 @2-Ohms, 225 Watts Max x 4 @4-Ohms, 900 Watts Max x 2 Bridged @4 Ohms.
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Mosfet Power Supply - A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock

BOSS Audio Systems PM1500 Monoblock Car Amplifier - 1500 Watts 2/4 Ohm Stable Class A/B Mosfet Power Supply Great for Subwoofers

  • Power - 1500 Watts Max x 1 @2-Ohms, 700 Watts Max x 1 @4-Ohms.
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
Check Stock

BOSS Audio Systems MODEL R1600M Car Amplifier - Model 1600W High Output Amp, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Great Amp for Subwoofers

  • POWER: 1600 Watts Max x 1 @2-Ohms, 800 Watts Max x 1 @4-Ohms.
  • CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • MOSFET POWER SUPPLY: A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • VARIABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

MB Quart MBQJ-STG6A-1 Speaker System Made for Jeep Wrangler (JL), Jeep Gladiator (JT), Tuned Audio Package, Full System Six-Speaker, 800-Watt OEM Upgrade, Black

  • ... REAR SOUNDBAR – Two 6x9” coaxial speakers with durable paper and mica cone, and a one-inch magnesium dome tweeter. Improved midrange, midbass, and high-frequency output. Steel mounting plates, hardware, and replacement OEM-style grilles are included..
  • AMPLIFIERS – Contains two 400-watt full range, water-resistant, two-channel Class D amplifiers. These amplifiers create big power and have a small chassis design with a low current draw. AAMPRO plug and play interface..
Check Stock

BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifier - 1100 High Output Monoblock Class A/B 2/4 Ohm Stable Low/High Level Inputs Low Pass Crossover Mosfet Power Supply Stereo

  • Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms.
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
Check Stock

BOSS Audio Systems Elite BE2500.1 Monoblock Car Amplifier - 2500 Watts, 2 4 Ohm Stable, Class AB, Mosfet Power Supply, Great For Subwoofers

  • POWER: 2500 Watts Max x 1 @2-Ohms, 1250 Watts Max x 1 @4-Ohms.
  • CLASS A/B TOPOLOGY: Class A amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class B amplifiers have no current flowing through its outputs with no audio signal.
  • MOSFET POWER SUPPLY: A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • SWITCHABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • VARIABLE GAIN CONTROL: The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
  • DIMENSIONS: The BE2500. 1 is 10 inches in Depth, 7 inches in Width and 2. 3 inches in Height. It weighs 4. 5 lbs..
  • : BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer so long as the purchase is made through . We strongly encourage professional installation o....
Check Stock

BOSS Audio Systems PT1600 2 Channel Car Amplifier - 1600 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable

  • Power – 800 Watts Max x 2 @2-Ohms 400 Watts Max x 2 @4-Ohms 1600 Watts Max x 1 Bridged @4 Ohms.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers but also your subwoofers.
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
  • Variable Bass Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s).
  • Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels.
  • Specs – Dimensions 14” x 10 3” x 2 3” Weight 9 lbs.
  • – BOSS Audio Systems provides a powerful 6....
Check Stock

BOSS Audio Systems R2000M Monoblock Car Amplifier - 2000 Watt Amp, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Great for Car Subwoofers

  • Power - 2000 Watts Max x 1 @2-Ohms, 1000 Watts Max x 1 @4-Ohms.
  • Class A/B Topology - Class A amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class B amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply - A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Low Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Specs - Dimensions: 11.5 x 10.44 x 2.25, Weight 7.....
Check Stock