Reviews Woodturning Lathes

Woodturning Lathe Tools Project Woodturner T-Shirt

  • ...ades (used one at a time) with Stellite Cutters giving a combination of cuts that will remove bowls from 3" to 12" up to 5" deep from the inside of the mother bowl. Different shaped vessels can also be achieved..
  • LATHES 1HP AND UP - Can be used on almost all Woodturning Lathes, from 12" to 16" swing with 1HP and up. 1" tool post included however, each lathe has a different diameter tool post so you may need to order a tool post to suit the lathe you are using if not 1". Set it up and start saving wood..
  • PREDICTABLE RESULTS EVERY TIME - The Woodcut Tools Bowlsaver has long lasting Stellite cutters which can cut green or seasoned wood, accurately remove a perfect bowl every time. A template pattern to determine bowl depth is included, or purchase a Light Guide to make this even easier..
  • USER GUIDES, TEMPLATE & VIDEOS SUPPLIED - An extensive user guide booklet is included in the box with your Bowlsaver. User guide, set up and demonstration videos are available on our You Tube channel..
Check Stock

Penn State Industries PKBHAM Brass Hammer Woodturning Project Kit

  • This is a woodturning project kit. Hardware only. A lathe is needed to make a finished handle. Blank and 1/2" forstner bit are not included..
  • Includes (1) PKBHAM Brass Hammer Woodturning Project Kit..
  • Each PKBHAM kit includes (1) Brass Head measuring 1-1/4" diameter x 2-1/2" long and weighing 1 lb 6 oz. , and (1) 3" internal connecting bolt with 1/2" x 13tpi thread..
  • This is a Turn-Between-Centers woodturning project kit..
  • Recommended minimum blank size needed to turn is 1" to 1-1/2" x 5-1/2" to 7"..
Check Stock

YUFUTOL 4pcs Tungsten Carbide Cutters Inserts Set Combination Set for Wood Lathe Turning Tools,(Include Square,Round and Diamond Shaped Cutters) Supplied with 4pcs Screws

  • This Combination Carbide Inserts Set match our 5pcs woodturning tool set perfectly . The will give the Best Selection for your Woodturning job. It fits YUFUTOL 5pcs Woodturning Tools Or Other Similiar Brand Tools.Easy to replace your jointers and planers..
  • Made of solid tungsten steel,providing you a better experience and durable use..
  • This is a combination set that meets the needs of roughing and finishing cutting, suitable for both professional carpenters and beginners..
  • 4 different carbide cutters satisfy all you demand:Square With Square(14x14x2.0mm),Diamond Shaped (10mm X 28mm X 2.5mm with Round Point),2pcs Round (Ø12mm*2.5mm-30°).
  • All the carbide inserts are supplied with screws. And they are perfect match our YUFUTOL Woodturning Tool Set..
Check Stock

Simple Woodturning Tools Carbide Wood Lathe Tool Mid Size Set of 5 with Solid Aluminum Beautiful Color-Coded Lathe Tool Handles Stainless Steel USA Made

  • Set of 5 professional carbide wood lathe tools are American made by Harrison Specialties in Ramsey, Minnesota, a family owned CNC machining and....
  • Simplify woodturning tool selection with beautiful color coded solid aluminum handles. Each CNC machined powdercoated turning tool handle is 1-1/8"....
  • Carbide woodturning tools feature ultra-sharp replaceable tips, which have multiple sides that can be rotated. Replacing or turning the cutters is....
  • Four included tools are designed with a 3/8" square shaft making it easy to keep tools flat on the tool rest. Overall turning tool length is 9". The....
  • Greatly simplifies woodturning with no need for any sharpening equipment..
Check Stock

I d Rather Be Woodturning T-Shirt Lathe Woodturner Gift

  • Wear this wood crafting tshirt while you turn wood on the woodturning lathe to carve a bowl with your chisel or parting tool. This wood turning shirt....
  • The I'd rather be Woodturning tee is a perfect wood turner gift for men and women, who love the craft of woodworking..
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

8Pcs Tungsten Carbide Cutters Inserts Set for Wood Lathe Turning Tools(Include 11mm Square with Radius,12mm and 8.9mm Round,30x10mm Diamond with sharp point),Supplied with Screws

  • This Combination Carbide Inserts Set match our 6pcs woodturning tool set perfectly . The will give the Best Selection for your Woodturning job. It fits Aogbra 6pcs Woodturning Tools Or Other Similiar Brand Tools.Easy to replace your jointers and planers.
  • 4 different carbide cutters satisfy all you demand:Square With Square(11*11mm),Diamond Shaped (10mm*30mm),2pcs Round (Ø12mm*2.5mm) and (Ø8.9mm*1.85mm).
  • Made of solid tungsten steel,providing you a better experience and durable use.
  • This is a combination set that meets the needs of roughing and finishing cutting, suitable for both professional carpenters and beginners.
  • All the carbide inserts are supplied with screws.
Check Stock

YUFUTOL 6pcs Tungsten Carbide Cutters Inserts Set Combination Set for Wood Lathe Turning Tools,(Include Square, Square With Radius,Round and Diamond Shaped Cutters) Supplied with 6pcs Screws

  • This Combination Carbide Inserts Set will give the Best Selection for your Woodturning job. It fits YUFUTOL 7pcs Woodturning Tools Or Other Similiar Brand Tools.Easy to replace your jointers and planers..
  • Made of solid tungsten steel,providing you a better experience and durable use..
  • This is a combination set that meets the needs of roughing and finishing cutting, suitable for both professional carpenters and beginners..
  • 6 different sizes satisfy all you demand:Square With Radius (15x15x2.5mm-R50),Square(14x14x2.0mm),Diamond Shaped (10mm X 28mm X 2.5mm with Round Point),2pcs Round (Ø12mm*2.5mm-30°),Round (Ø16mm*3mm-30°).
  • All the carbide inserts are supplied with screws. And they are perfect match our YUFUTOL 7pcs Woodturning Tool Set..
Check Stock

Penn State Industries PKMALLET Brass Mallet Woodturning Project Kit

  • A lathe is needed to make a finished handle.
  • Blank, 1/2" forstner bit, and all other turning supplies are not included.
  • Each PKMALLET kit includes (1) Brass Head measuring 1-1/4" diameter x 1-7/8" long and weighing 11.5 oz. , and (1) 3" internal connecting bolt with 1/2" x 13tpi thread.
  • Recommended minimum blank size needed to turn is 1-1/2" x 1-1/2" x 4-1/2".
  • This is a Turn-Between-Centers woodturning project kit.
  • Customize the turned, finished handle shape and length.
Check Stock

Penn State Industries PKSCKIT Mini Scissors Woodturning Project Kit

  • Brass tube, mini scissors parts, and clip only.
  • A LATHE IS NEEDED TO 'TURN' THE FINISHED HANDLE.
  • Blank, bushing set, drill bit and all other turning tools and supplies are not included.
  • Includes (1) PKSCKIT Mini Scissors Woodturning Project Kit in Chrome.
  • Easy project to turn on a 7mm pen mandrel or between centers.
  • Minimum blank size needed to turn is 3/4" x 3/4" x 3".
  • Scissors tuck away safely in to your turned barrel.
  • When closed, finished length is approximately 4-9/32".
Check Stock

Penn State Industries PKPCUTA Standard Stainless Steel Pizza Cutter Kit Woodturning Project 5pack

  • This is a woodturning project kit. Hardware only. HANDLE NOT INCLUDED. A LATHE IS NEEDED TO 'TURN' INTO FINISHED pizza cutter. Blanks, 1/2" drill bit,....
  • Includes (5) PKPCUTA Standard Stainless Steel Pizza Cutter Woodturning Kits..
  • This is a Turn-Between-Centers project kit. Overall length will vary depending on your own custom handle design. Minimum blank size is 1-1/2" x 1-1/2"....
  • Features a 4" stainless steel cutting wheel, a thumb guard, and a ferrule style handle..
Check Stock

Penn State Industries PKGRIND-4 Antique Style Copper Finish Peppermill Mechanism Woodturning Kit (1, Antique Copper)

  • This is a woodturning project kit. Hardware only. A lathe is needed to make into finished pens. Blanks and drill bits are not included..
  • Includes (1) PKGRIND-4 Antique Style Copper Finish Peppermill mechanism woodturning project kit.
  • Cast metal mechanism measures 4-1/2" high by 2" diameter.
  • Adjustable mechanism for choice of course to extra fine pepper grounds.
  • Requires (3) drill bit sizes: 5/16", 1" Forstner, and 1-3/4" Forstner. Minimum blank diameter is 2-3/4"..
Check Stock

Penn State Industries PKMSPN Measuring Spoon Set Kit Woodturning Project (1pack)

  • These are woodturning project kits. A LATHE IS NEEDED TO 'TURN' INTO FINISHED A MEASURING SPOON SET. Blanks, bushings, drill bit, and all other turning accessories are not included..
  • Includes (1) PKMSPN Woodturning Measuring Spoon Set Kit..
  • Each set includes measuring spoon sizes 1/4 tsp, 1/2 tsp, 1 tsp, and 1 Tbs..
  • Uses bushing set PKMSPBU. Requires 7mm drill bit (PK7-MM) and 5/8" x 5/8" x 3-1/2" minimum blank size..
  • Easy to make on a pen mandrel with 7mm tubes. Chrome ring included. The measurements are marked in the metal..
Check Stock

Penn State Industries PKSLFUNCH Funline Economy Slimline Twist Ballpoint Pen Kit Woodturning Project (100, Chrome)

  • This is a woodturning project kit. Hardware pen parts only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. Blanks, bushing set, drill bit and all other turning tools and supplies are not included.
  • Includes (100) PKSLFUNCH Chrome Funline Economy Slimline Twist Ballpoint Pen Woodturning Project Kits.
  • Features an 7mm dual tube design, a twist mechanism, and a Cross style black ink refill.
  • Minimum blank size needed to turn is 5/8" x 5/8" x 4-1/4".
  • Compatible with standard 7mm slimline bushings (PKM-BUSH3).
Check Stock