Reviews Wood Railing System

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8' Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

  • New deck railing design, clean and elegant. This cable railing kit includes 30 pcs left, 30pcs right hand thread lag screws, 1 patent design wrench, and 2 drill bits. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier..
  • This deck railing hardware fit 1/8″ OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable..
  • Length of cable should be 1-1/2″ shorter than wood surface distance（as shown in pic.4).
  • if you want to DIY a high quality cable railing system, standard 1/8″ (OD) cable which was made of T316-stainless steel is recommended. Please search on amazon” B0B71J2DXD” if you need black lag screws..
  • By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won’t be easily unfixed or destroyeded..
  • The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle ....
Check Stock

Muzata 40Pack Cable Railing Kit Protector Sleeve Adhesive Grommet Protective for 1/8\ 5/32\ 3/16\ Wire Rope Wood Metal Posts T316 Stainless Steel Cable Deck Stair Railing CR91,CP2

  • Clean Finished Look - The protector sleeves could be used on INTERMEDIATE posts to cover ugly holes and present a clean look of your deck railing. They can also work with cable railing kit on END posts to for a neater look. Please note that adhesive sleeves are ONLY for decorative function, not for load-bearing applications. Package includes: 40pcs washers and 80pcs adhesives (Extra adhesives as backup and do not throw them away).
  • SPEC&Application - ID-3/16"(5mm),OD-3/4"(19mm),thickness-1/32"(1mm). These adhesive washers work for both wood and metal posts, fit 1/8" 5/32" 3/16" cable on level, fit 1/8" 5/32" cable at 30°angle. Please check the image to find the compatibility table for further models. Cable railing kit CR73 is recommended to work with CR91 for wood invisible cable railing system.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System - We pre-designed a CableGenie wood cable railing system to help you get a fully customized project, which includes cable railing kit CR73,1/8” wire rope WR02, adhesive sleeve CR91, drill guide CT19, crimper and cutter CT01, socket wrench ....
Check Stock

Walrkaur 304 Stainless Steel Deck Railing Brackets for 2'' x4''(Actual 1.55'' x3.5'') Railing Wood Post (16pcs)

  • Patent Design - With a flexible separation design, Muzata angle protector sleeves fit 1/8" wire rope and are easy to install on stair railing and ramps at 10 30 35 degrees. If you need angles larger than 35°, pls choose CR69(45°Angle Protector Sleeve). Note: these cable railing kits are ONLY for WOOD posts. Package includes: 40packs angle sleeves, 40packs adhesive sleeves, 80pcs adhesives, 1pc drill bit(9/32").
  • Protective and Decorative Function - These stainless steel protector sleeves help protecting wood post and stainless steel cable from friction wear. Adding these protective sleeves will make it easier to stretch cable through posts and also beautify the rough edges of the drilled holes to create a clean look. Note: It works for wood posts only, not for metal posts.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather. Ideal for indoor and outdoor, even coastal applications subject to high humidity and salt air.【Muzata's Guarantee】: Please feel free to contact us if you find any quality problems after installation. We'll provide you with the most attentive after-sales service.
  • Pre-Designed System - To help you construct a cable railing system, we pre....
Check Stock

Muzata 20Pair Cable Railing kit Invisible 1/8 Upgraded Swage Tensioner and Terminal Hidden T316 Stainless Steel for 2 -6 Wood Metal Post Deck Stairs WoodHidden System CR26 CV1 CV2

  • Patent Invisible -- With this patent designed invisible tensioner kit, you can finally hide the whole cable railing kit inside the wood post to get a....
  • WoodHidden System -- This product belongs to Muzata WoodHidden system, a thoughtfully designed cable railing system for wood frames. We have planned....
  • Marine-Grade -- This cable railing hardware is made of T316 stainless steel, which is rust-resistant and durable for both indoor and outdoor, even....
  • Beginner-Friendly -- It's pretty easy to install this cable railing hardware, even for beginners. It’s suitable for 2”-6” metal and wood posts.....
  • Free Design Service -- If you are a beginner or not sure about how to do it, please reach us by clicking on "by Muzata" below "add to cart." Our....
Check Stock

kjxxkj Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8 inch Cable Railing Kit,Decking Railing Hardware,DIY Baluster Kit (30 Pairs）

  • This cable railing kit include 30-pcs right and 30-pcs left hand thread lag screws.
  • Kit made of T316 –stainless steel，So it can be used indoor and outdoor；.
  • This deck railing hardware fit 1/8-inch OD cable of railing system，The thread screws were designed for wood post，Length of lag screw is 4 inch and length of its thread is 2 inch；.
  • This swage lag screws used Integrated design，So this kit will make your installation more easier、beautiful and secure, But connection of cable with lag screws need by using hydraulic crimper；.
  • Note：Length of cable should be 1.5 inch shorter than wood post edge distance（as shown in fig.3).
  • If you want To DIY a high quality railing system，Standard 1/8 in(OD) cable which was made of T316-stainless steel is recommended(Please seach B0798NLB8L to purchase the right cable).
  • By the design of Right&left handed thread, Of course it can be used to adjust the tightness of cable, So the turnbuckles are not needed in the railing system, And this cable railing can’t be easily unfixed and damaged by outsiders..
Check Stock

Muzata Drill Guide for Cable Railing Kit Lag Screw Fitting Wood Post Installation, Fit 90 Degree Horizontal Deck and 45 Degree Angled Stair, Visible Drilling Template Jig, Patent Design CT10,CT1

  • Accurate and Multi-Angle – This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal vertical straight holes and 45 degree angled holes for the wood railing posts. You can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with your hand drill. Package includes: 1pc drill guide.
  • Various hole sizes – This cable railing drill template guide jig offers 4 different size guide track holes (fit 3/16”, 1/4”, 5/16”, 3/8” drill bit), compatible with most cable railing kit hardware. The hole drilled by 1/4” drill fit most 1/8″ cable railings lag screws. You can fix the steel sleeves by tightening the anchor screws to prevent the steel sleeves from falling off during drilling.
  • Visible and Portable – The drill guide is made of transparent acrylic with excellent visibility that you are easy to position accurately on the decking wood post. It is portable and easy to carry. Recommend working with F clamp or C clamp for steadier and safer drilling. Note: Clamps are not included, please search F or C clamp and choose a size larger than 8 inches.
  • Pre-Designed System – We pre-designed a cable railing system to help you construct a beginner-friendly wood system. It includes 1/8″ togg....
Check Stock

Muzata 30 45 90 Degree Multi-Angle Drill Guide with Drill Bits Cable Railing Kit Stair Visible Drilling Template Drill Jig 4 Sizes for Straight Angle Corner Hole Lag Screw for Wood Post CT21, CT1 PG1

  • Multi-Angle and Accurate – This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal vertical straight holes, 30 and 45 degree angle holes for the wood post. You can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with it. Package includes: 1pc drill guide, 1pc allen wrench, 3pcs set screws, 1pc blowing dust ball, 4 sizes of drill bits：3/16”,9/32”, 5/16”,13/32”.
  • Various hole sizes and Portable- This cable railing drill template guide jig offers 4 different size guide track holes (fit 3/16”, 9/32”, 5/16”, 13/32” drill bit), which are compatible with most cable railing kits hardware. The hole drilled by 5/16’’ drill fit most 1/8″ cable railings lag screws. This drill guide for cable railing is light and small pocket carrying, compact, and easy to carry.
  • Visible and Easy Operate – The handrail drill guide is made of transparent acrylic with excellent visibility that you are easy to lock your selected position on the decking wood post. The fixing metal sleeve of the desired size can be replaced by adjusting the set screw. Use with the attached F clamp and 4 Sizes of drill bits to ensure steady drilling and precise angles.
  • Pre-Designed System – We pre-design....
Check Stock

Muzata 60Pack Stainless Steel Protective Sleeves Cable Railing Kit Hardware for 1/8 Wire Rope Cable Wood Posts T316 Marine Grade Deck Stair Railing CR13,CP1

  • Protective Function -- These stainless steel protective sleeves fit 1/8" wire rope in level wood posts applications. Apply for both wood posts and....
  • Clean Finished Look-- The protector sleeves can cover the ragged holes after drilling and create a clean look, adding a nice touch to the overall look....
  • Marine Grade -- This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather.....
  • Pre-Designed System -- We pre-designed a WoodBudget cable railing system to help you construct a cost-effective system. It includes 1/8" swage lag....
  • Why Choose Us- MUZATA is a leading cable railing manufacturer offering premium products at competitive prices. Over years of research on cable railing....
Check Stock

Muzata 20Pack 10 30 35 Degree Angle Adjustable Protector Sleeve for Wood Post Stair Railing for 1/8\ Wire Rope Cable Railing T316 Stainless Steel CR68,CP1

  • Patent Design - With a flexible separation design, Muzata angle protector sleeves fit 1/8" wire rope and are easy to install on stair railing and ramps at 10 30 35 degrees. If you need angles larger than 35°, pls choose CR69(45°Angle Protector Sleeve). Note: these cable railing kits are ONLY for WOOD posts. Package includes: 20packs angle sleeves, 20packs adhesive sleeves, 40pcs adhesives, 1pc drill bit(9/32")..
  • Protective and Decorative Function - These stainless steel protector sleeves help protecting wood post and stainless steel cable from friction wear. Adding these protective sleeves will make it easier to stretch cable through posts and also beautify the rough edges of the drilled holes to create a clean look. Note: It works for wood posts only, not for metal posts.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather. Ideal for indoor and outdoor, even coastal applications subject to high humidity and salt air.【Muzata's Guarantee】: Please feel free to contact us if you find any quality problems after installation. We'll provide you with the most attentive after-sales service.
  • Pre-Designed System - To help you construct a cable railing system, we pr....
Check Stock

Muzata 30 90 Degree Angle Drill Guide Cable Railing Kit Stair Visible Drilling Template Drill Jig 4 Sizes for Straight and Angled Hole Lag Screw for Wood Post CT09,CT1

  • Accurate and Multi-Angle - This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal vertical straight holes and 30 degree angled holes for the wood railing post. You can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with your hand drill. Package includes: 1pc drill guide.
  • Various hole sizes - This cable railing drill template guide jig offers 4 different size guide track holes (fit 3/16”,1/4”, 5/16”,3/8” drill bit), compatible with most cable railing kit hardware. The hole drilled by 1/4" drill fit most of 1/8" cable railings lag screws. You can fix the steel sleeves by tightening the set screws to prevent the steel sleeves from falling off during drilling.
  • Visible and Portable - The drill guide is made of transparent acrylic with excellent visibility that you are easy to position accurately on the decking wood post. It is portable and easy to carry. Recommend working with F clamp or C clamp for steadier and safer drilling. Note: Clamps are not included, please search F or C clamp and choose a size larger than 8 inches.
  • Pre-Designed System - To help you construct a cable railing system, we pre-designed a cable railing system named WoodBudget especially with 1/8" swage lag....
Check Stock

Muzata Upgraded Multi Angle Drill Guide Fit 25 30 35 40 45 90 Degree Cable Railing Kit Stair Visible Template Jig 4 Sizes Guide Track for Straight and Angle Hole Wood Post CT19 CT1

  • Multi-Angle and Accurate – This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal or vertical straight holes and 25 to 45 degree angle holes for the wood post. Suitable for drilling holes with unconventional angles and standard angled. Package includes: 1pc drill guide.
  • Various drill bit sizes – This cable railing drill template guide jig offers 4 different sizes of guide tracks(fit 3/16”,9/32”, 5/16”,13/32” drill bits), compatible with most cable railing kit hardware. The hole drilled by 5/16″ drill fit most of 1/8″ cable railings lag screws. The fixing metal sleeve of the desired size can be replaced by adjusting the Jack bolt. The reserved gap between drill bit and metal sleeve can prevent the wear of drill bits and sleeves when drilling.
  • Visible and Portable – The drill guide is made of transparent acrylic with excellent visibility so it is easy and accurate to position on the decking wood post. It is portable and easy to carry. Recommend working with F clamp or C clamp for steadier and safer drilling. Note: Clamps are not included, please search F or C clamp and choose a size larger than 8 inches.
  • Pre-Designed System -We pre-designed a WoodHidden cable railing system to help you construct a hidden woo....
Check Stock

Muzata 1Pc Upgraded Custom Socket Wrench for 3/16'Invisible Cable Railing kit, Fit for Muzata CV1 Hidden Turnbuckle Tensioner on Wood Metal Posts for Deck Stair CT17, CT1

  • Patent Design - This custom socket wrench is an essential tool to work with Muzata invisible cable railing kits. The tensioners are patented designed with a flattened tail. With this custom socket wrench, you can clamp the tail and hide the ugly swaged end inside the post. As it keeps the cable from spinning when tightening, you can get enough tension to pass the 4” sphere test to meet code compliance.
  • Material -This custom socket wrench is made of upgraded high-tensile metal CR12Mo, durable for long-term use under correct operation. However, it may be damaged due to incorrect operation. Please check pic 4 to find instructions and see more details in the video.
  • Adapted Cable Railing Kits - With the socket wrench, Muzata invisible cable railing kits now has a wider application. For 4”x4” and larger wood posts, CT17 is compatible with cable railing kits CB18, CR99. For 2”x2” and 4”x4” wood and metal posts, CR27,CR53. Know more about the compatibility, please check the picture 5.
  • Pre-Designed System - To help you construct a neat-look hidden wood cable railing system, we pre-designed an item list below, including 3/16” cable railing kit Muzata CR99, adhesive sleeves CR91, 3/16” wire rope WR14, hydraulic crimper and cutter set CT01, drill ....
Check Stock

Muzata 10Pack 1/8 Invisible Cable Railing Kit Swage Lag Screw Tensioner CableGenie System Completely Hidden for Wire Rope Wood Posts T316 Stainless Steel 5 Cable Line CR73 CV1 CG1

  • Patent Invisible -- With this patent designed invisible tensioner kit, you can finally hide the whole cable railing kit inside the wood post to get a....
  • Reusable -- This invisible lag screw is beginner-friendly. The normal cable railing hardware has to be swaged and if you get a wrong measurement, you....
  • Marine-Grade -- This cable railing hardware is made of T316 stainless steel, which is rust-resistant and durable for both indoor and outdoor, even....
  • CableGenie system -- This product belongs to Muzata CableGenie system, a thoughtfully designed cable railing system for wood frames. We have planned....
  • Free Design Service -- If you are a beginner or not sure about how to do it, please reach us by clicking on "by Muzata" below "add to cart." Our....
Check Stock