Reviews Wheel Flanges

LOUDERLUN Bead Roller Forming Set 9 Dies 1 Polyurethane Roll Tipping 22mm shaft

  • Includes 9 steel dies and 1 polyurethane lower wheel.
  • Hem edges, create offsets and flanges, form style lines, contours and channels.
  • Kit includes the following: Polyurethane Lower Wheel, 180 degree lower die, Inside offset die , Outside offset die , Knife edge tipping die , Lower....
Check Stock

DEWALT Angle Grinder Tool, 4-1/2-Inch, Slide Switch, 11-Amp (DWE4214) , Yellow

  • 11 Amp AC/DC 11,000 RPM motor of the angle grinder is designed for faster material removal and higher overload protection.
  • Dust Ejection System of the metal grinder provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents.
  • DEWALT angle grinder comes with low profile gear case allowing access into tight spaces.
  • Quick-Change wheel release allows tool free wheel removal.
  • One-Touch guard allows 360 degree rotation of the guard with a single action.
  • Lock-On slide switch provides increased user comfort in extended use applications.
  • Matching wheel flanges allow the use of common accessories.
Check Stock

3M Green Corps Cut-Off Wheel 20275, Ceramic, 13300 rpm, 4-1/2" Diameter x 3/64" Width, 7/8" Arbor, Green (Pack of 50)

  • Ceramic abrasive grain cuts faster and lasts longer than non-ceramic grain, offering significant productivity gains.
  • Performance far surpasses that of aluminum oxide wheels.
  • Rigid, reinforced resin-bonded wheel slices through almost all materials including stainless steel, mild steel, and aerospace alloys.
  • Wheel must have a maximum operating speed greater than or equal to the maximum speed of the power tool used.
  • MUST BE USED WITH ANSI-APPROVED FLANGES FOR TYPE 1 CUT-OFF WHEELS AND A WHEEL GUARD THAT FITS THE SIZE OF THE CUT-OFF WHEEL.
Check Stock

Bead Roller Forming Set 9 Dies 1 Polyurethane Roll Tipping 22mm shaft CR12 not chrome plated not peel

  • Includes 9 steel dies and 1 polyurethane lower wheel.
  • Material = CR12 Steel , Hardness = 35~45HRC.
  • Hem edges, create offsets and flanges, form style lines, contours and channels.
  • Kit includes the following: Polyurethane Lower Wheel, 180 degree lower die, Inside offset die , Outside offset die , Knife edge tipping die , Lower....
Check Stock

Malco QHT1 Quarter Panel Hemming Tool

  • Bend and close wheel arc flanges of replacement quarter panels.
  • Chucks onto your existing drill or impact driver.
  • 80 percent faster based on actual field trials.
Check Stock

Esco - 20429 Pneu-Tek Pneumatic Bead Breaker

  • Universal bead breaker for car, truck, tractor, mower, ATV, RV, golf cart and more.
  • Clamping jaw with adjustable set screw for better grip on wide variety of rim flanges.
  • Includes heavy-duty 1 1/16in. impact socket.
Check Stock

DEWALT Angle Grinder Tool, 4-1/2-Inch, Paddle Switch with No Lock, 11-Amp (DWE402N)

  • 11 Amp AC/DC and 11,000 RPM motor of the angle grinder is designed for faster material removal and higher overload protection.
  • Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the metal grinder through the air intake vents.
  • DEWALT angle grinder comes with low profile gear case allowing for access into tighter spaces.
  • Quick-Change wheel release provides easier and quicker wheel removal without the need for a wrench.
  • One-Touch Guard allows for 360 degree rotation of the guard with a single action.
  • No Lock-On Paddle switch lock-ff provides the user protection from accidental start up.
  • Matching wheel flanges allow the use of common accessories.
  • 11 Amp AC/DC 11,000 rpm motor which provides the best power to weight/size ratio available.
  • Dust Ejection System provides durability by ejecting damaging dust and debris.
Check Stock

Maymom Flange Inserts 17 mm for Freemie 25 mm Collection Cup 2pc/each semi transparent

  • After market silicone insert compatible with Freemie 25 mm cup. Reduce the nipple tunnel down to 17 mm..
  • Made from Silicone and PP - BPA free, and DEHP free.
  • Also compatible with Medela 24mm PersonalFit shield, Spectra 24mm flanges, Ameda Purely Yours 25mm flanges, Ameda Mya Joy 25mm flanges, Willow 24mm....
  • Incompatible with Medela 24mm PersonalFit Flex, Motif Luna 24 flanges, Ameda Mya/Ameda Mya Pro 24mm flanges, Elvie/ Elvie Stride 24mm flanges, Momcozy....
Check Stock

Flexzion Fender Lip Roller for Wheel Tire Arching Rolling Extending Flaring Reforming Installing Upgrading, Adjustable DIY Repairing Tool for Home Use or Auto Body Shop

  • ...ork On Wheel Arch Lips - slowly evenly ease and roll back the fender/wheel arch lip, allowing for better increased tire-to-wheel clearance and fitment of bigger wider wheels and lowered vehicles.
  • Universal Compatibility - Elongated holes in multiple possible positions allow for bolting directly to most 4 & 5 Lug hub flanges various bolt size up to M12 (x1.75mm pitch). Providing the perfect pivot point to perform an even fender roll back. Producing the best finished product.
  • Fully Adjustable Arm - The fender roller fits in all kinds of different spaces between the wheel hub and inner fender lip, allowing you to work on a wide range of automotive vehicles and light trucks applications. Whether it's removing dents or rolling back the fender lips, this tool will be indispensable.
  • Strong Industrial Materials Made - Not only is this body kit tool easy to use, but is also super durable. Made for high strength carbon steel and powder coated surface finish for durability and longevity. Providing excellent secure working conditions with your or a customer's car.
Check Stock

Globauto Bead Roller Forming Set 9 Dies 1 Polyurethane Roll Tipping 22mm shaft Cr12

  • This kit includes an additional 10 dies to use with any bead roller with a 7/8 inch (22mm) shaft..
  • With these additional dies on your bead roller you can create hemmed edges, offset flanges, contours, deep channels, and style lines..
  • Material = CR12 Steel , Hardness = 35~45HRC.
  • This kit also includes a polyurethane lower "skate board" wheel, which can be used with a variety of upper dies..
Check Stock

NMAZA 3 Jaw 10 Inch Hydraulic Gear Puller 10Ton Wheel Bearing Pulling Separator 3 in 1 Pump Oil Tube Drawing Machine M/Case

  • 【POWERFUL TOOL】 : This Hydraulic Gear Puller has 10 Ton Max Capacity and 2"(50mm) Ares Travel with spread10" ( 250mm) which can meet your working requirements.
  • 【3 IN 1 DESIGN】:This Wheel Bearing Pulling Separator integrates pumps, oil tube and drawing machine. Its forged steel 2 way yoke allows twin or triple leg pulls, the 3 jaw types can be adjusted from high to low point. Pump head can be turned by 360°for flexibility.
  • 【COMPACT & LIGHTWEIGHT】: The integral puller is compact and lightweight, Packed in blow mould carrying case, easy for you to transport or storage.
  • 【EASY TO USE】-Easy to carry and operate, portable structure is easy for carrying and operation.
  • 【WIDE APPLICATION】: This great Wheel Bearing Hub Removal Tool has wide appication, which is suitable for pulling hubs flanges, gears and bearings.
Check Stock

Compatible/Replacement for CHEVY/GM TURBO TH-350 TRANSMISSION KICKDOWN CABLE KIT

  • 【1 x T3/T4 Hybrid Turbo Charger】: Power performance output capability = 25-35 psi. CNC machined flanges..
  • 【Turbo Specification】: Inlet Diameter: 3″, Outlet Diameter: 2″, Oil Inlet: 1/8 NPT, Compressor Wheel: .55 Trim, A/R Compressor: .50 A/R, A/R Turbine: .63 A/R.
  • 【Turbocharger Overall size】: 270*220*220mm.
  • 【Applications】：Perfect for any 4-6 cylinder applications. Perfect for 4/6 cylinder 1.5L-2.5L engines.
  • 【Notice】: This is universal turbo kit. It will work for whatever you have the skill for. This is NOT specific to ANY vehicle.Professional installation is highly recommended (No Instruction Included).
Check Stock

HomiShare Floor Flange 2" Pipe Flange 4Pcs Industrial Malleable Iron Pipe Fittings with 4 Threaded Holes, Industrial Vintage Style Floor Flange for DIY Industrial/Home Decoration(4 Pack, 2")

  • High Quality Floor Flange: The floor flange uses premium cast iron as raw material. Each floor flange in our factory need to be tested carefully and protected well. So it is firm enough to use for a long time. All flanges are made from the same mould to ensure precision..
  • Durable and Anti-rust: Compared to other flanges on the market, our flanges have an anti-rust coating on the surface. This coating can effectively prevent the flanges from rusting and corroding, which have a longer life-circle than others..
  • Good Design：Our pipe flange shows vintage lettering on the front surface. Different with other three holes flanges on the market, it has four threaded holes. So the flange can be fixed more stable. In addition, the bottom of our flange is flat and smooth to fit the wall..
  • Easy to Install: The four mounting holes and flat surface help you easily install the flange. The package includes four flanges. You can use them to fasten various pipes, fittings or other industrial equipment. It is very convenient to assemble and disassemble when you need..
  • DIY and Multiple Functions: You can use our flanges with other industrial fittings for a variety of practical applications such as industrial handrail, door handle, rack, shelf, craft ornaments, etc. Just unl....
Check Stock