Reviews Welding Pvc Sheet

Glarks 6Pcs Welding Slag Removal Tool Set, Include 10'' Welding Chipping Hammer with Coil Spring Handle, Wire Brush, 10'' Welding Plier and 2Pcs Stainless Steel Metal Sheet Thickness Gauges

  • ♚ [What You Get]: This set includes a 10'' welding chipping hammer, a wire scratch bush, a welding plier and a pair of welding protective gloves, as well as 2pcs stainless steel metal sheet thickness gauges. With this powerful set, you can quickly remove rust and slag during welding and keep your work clean..
  • ♚ [Welding Chipping Hammer]: The welding chipping hammer is made of high strength and toughness steel. Dual-headed design, one end is a flat chisel and the other end is a pointed chisel, which is convenient for working in a small space. The coil spring handle can reduce vibration and improve comfort..
  • ♚ [Wire Scratch Brush]: The wire scratch brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability. The brush is 10 inches long, the appropriate size and wooden handle make it easier for grasping..
  • ♚ [Welding Pliers]: The welding pliers is made of high quality steel, nickel plated steel avoids rust and corrosion, pvc handle and spring-loaded design for comfortable operation. Perfect for cutting wires, removal and cleaning in welding work..
  • ♚ [Widely Application]: The gauges which sizes and numerals are etched into the surface for clarity and easier reading, you can get a precise and ....
Check Stock

Spot Welder with LCD Screen, 70 Gears Adjustable DIY Battery Spot Welding Equipment Portable Mini Spot Welder for Battery, Built-in 7500 mAh Rechargeable Battery, Type-C Port, Nickel Strip & USB Cable

  • 【Upgraded LCD Screen】MIXILIN spot welder is made of high-quality aluminum alloy material with an anodized welding machine surface, which is wear-resistant and fireproof to use. Newly upgraded LCD screen can clearly know the system internal temperature, charging status, remaining battery, gear level and time interval of the spot battery welder..
  • 【70 Gears Adjustable】Mini spot welder with 70 gears adjustable output power design, it can satisfy more professional welding demands. 1.0-2.9 gears suitable for thin nickel sheet.
  • 3.0-6.5 gears suitable for medium thickness nickel sheet.
  • 6.5-8.0 gears suitable for thick nickel sheet, iron sheet and steel sheet. Very fine adjustments can make the welding more precise and the spot welding effect more perfect..
  • 【Built-in 7500 Ma-h Rechargeable Battery】Portable spot welder built in 7500mA-h high-rate rechargeble battery,with type-C charging cable,can be fully charged within 3 hours, and it can continuously weld about 2000 points after being fully charged. It also can be used as a power bank when you need charging during traveling or outgoing, support 2.4A fast charging..
  • 【40cm Welding Pen & Safe to Use】The gold-plate spot-welding pen consists of multiple strands of high temperature wire, with fine con....
Check Stock

Butt Welding Clamps, Sturdy Durable 16pcs Butt Welding Clamps ,for Sheet Metal Auto Car Truck Door Skin Panel, for Precision Butt Welding and Edge to Edge Welding(16pcs)

  • High-quality and durable:This set of clips has excellent performance in precision butt welding and edge-to-edge welding. The butt welding tongs are made of galvanized steel, rust-proof, heat-resistant and durable. The smooth metal surface prevents rust, is not easy to deform, and has a long service life..
  • Professional welding clamp tools:Each welding square tool tube clamp can extend the clamp block, leaving a 0.040 inch (1cm) gap between the panel and the edge welding. Suitable for straight or curved plates. The minimum gap of the welding plate is about 1 mm, which can be adjusted to a farther position as needed..
  • Good performance: These clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Professional use:Sheet metal welding tongs are designed for welding operations. Very suitable for welding cracked metal floors, automotive sheet metal surfaces, door skins or prefabricated panels assembled in re-skinning projects. These clips can fix panels of any shape anywhere..
  • Easy to use:After spot welding the two panels together, remove the wing nut release device and toggle, just remove the fixture from the work befor....
Check Stock

Spot Welder, 11000mAh Battery Spot Welder with LCD Screen, 80 Gears Adjustable Portable Mini Spot Welder With Type-C Port, Nickel Strip and USB Charging Cable for Battery Pack Spot Welding

  • 【Upgraded LCD Screen】The spot welder is made of high-quality aluminum alloy material with an anodized welding machine surface, which is wear-resistant and fireproof to use. Newly upgraded LCD screen can clearly know the system's internal temperature, charging status, remaining battery, gear level, and time interval of the spot battery welder..
  • 【80 Gears Adjustable】This portable spot welder with 80-speed output power adjustable(Coarse and Fine Adjustment Button to Adjust). 1.0-2.9 gears suitable for thin nickel sheet.
  • 3.0-6.5 gears suitable for medium thickness nickel sheet.
  • 6.5-8.0 gears suitable for thick nickel sheet, iron sheet and steel sheet. Very fine adjustments can make the welding more precise and the spot welding effect more perfect..
  • 【11000mAh Power Bank Function 】This portable spot welder, built in 11000mA-h rechargeable polymer lithium battery,can be fully charged within 3-5 hours with 5V/2.1A type c charging port and it can continuously weld thousands of points after fully charged . The battery spot welder can be also used as a power bank for electronic products charging with USB outport .The welding machine will shut off automatically....
Check Stock

Glarks 3 Pack Stainless Steel Welding Gauge Set, 25-3000um Wet Film Comb + Wire Metal Sheet Thickness Gauge + Round Dual-Sided Wire Cable Sheet Gage Standard Thickness Metal Gauge AWG and SAE

  • ★【What You Get】: In this welding gauge kit, it include a pack of wet film comb, a pack of wire metal sheet thickness gauge, and a pack of dual-sided wire cable sheet gage total 3 pack. They are well packed in a plastic box, easy for carry and store..
  • ★【High Quality】: All the welding gauge are made of stainless steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust..
  • ★【Measuring Range】: Wet film comb range is 25-3000um. Dual-sided round wire gauge range is 0-36 American standard.
  • Wire metal sheet thickness welding gauge is 24GA (.0239), 22GA (.0299), 20GA (.0359), 18GA (.0478), 16GA (.0598), 14GA (.0747), 1/8" (.0125), 10GA(.1345), 3/16" (.1875), 1/4" (.250), 5/16" (.3125), (.024"), (.030"), (.035")..
  • ★【Pratical Measuring Tools】: The interval division on the gauge is detailed and having high measuring precision. Sizes and numerals are etched on the surface for clarity and easier reading. Good to determine the thickness of the material before welding or working, permits a quick and accurate measuring of the most popular welding thickness..
  • ★【Wide Application】: They measure accurately and have almost no errors. Wet film c....
Check Stock

5000W Handheld Spot Welder, Docreate Portable Spot Welder Machine DIY Kit for 18650 Battery Pack Welding Tools, Adjustable Battery Welding Soldering Machine with Nickel Strip and Spot Welding Pen

  • Hight Quality & Durable: The 5000W High power spot welding machine is good performance and long service life. Which is ABS shell material, surface anodizing technology, anti-abrasive and safe to use. The spot welding machine is come with welding pen with good conductivity and low contact resistance..
  • Portable Design:This mini spot welder equipment is Portable and lightweight, space-saving in home, and you can transport your spot welder to different job locations easily and quickly..
  • High-Efficiency: The adjustable spot welder can weld thousands of points continuously on nickel sheet after full charge,the solder pins of the adjustable spot welding machine can be removed and replaced, easy installation and operation..
  • Easy to Operate: The DIY battery spot welder machine is foot switch controls welding, spot welding is more arbitrary. Just press the nickel belt with two soldering pens and step on the foot switch. Wait for about 0.5 seconds for output spot welding,then release the foot switch.suitable for precise welding..
  • Wide Application & Warranty: The spot welder with larg....
Check Stock

Gauge Metal Sheet Thickness Gauge Metal Gauge Tool Stainless Steel Thickness Gauge ONE-Sided Material Wire Thickness Gauge Plated Size Inspection Tool (3)

  • Portable: pulling this metal gauge tool out of your pocket to measure metal is quicker and easier than using a tape measure.
  • Material: made of quality stainless steel, anti-rust and corrosion resistance, so the metal thickness gauge welding can serve for a long time application to avoid frequent replacement.
  • Package includes: you will receive 3 pieces of metal sheet thickness gauge, and the size is 1.0 inch in width and 2.8 inch in length.
  • Practical handy tool: you can determine the thickness of the material before welding or processing and measure the most popular welding thickness quickly and accurately.
  • Must-have accessories: the sheet thickness gauge is useful for checking metal sheet wire size before welding or working, and is also durable and easy to read.
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

JEGS MIG/MMA 180 Welder | 220V AC | Includes Gas Regulator, MMA Clamp, Welding Torch, Ground Clamp & Cable, Hand Held Mask, And Wire Brush

  • EASY TO CARRY with the help of a built-in handle.
  • WELDING VOLTAGE AND WIRE FEED are adjusted with one control according to thickness of the welded sheet.
  • LENGTH OF THE ARC/WELDING HEAT is trimmed with another control, and once the right value is found there usually is no need to change it even when welding a thicker or thinner sheet.
  • ENJOY WELDING with freedom, flexibility, and ease of setting up and dialing in your welding project with the simple control design.
  • SPECIFICATIONS: 220V AC, Duty Cycle: 25% @ 180A/60% @ 117A, Wire: 7.87 “ Reel x 0.030 “ - 0.035 “.
Check Stock

HANSWAY High Temp 24\X36\X1/4'' Felt Carbon Fiber Welding Blankets Black (24 x 36 inches)

  • ✅【Suitable Size】the aluminized fiberglass sheet measures 18 x 24 inch/24X36inch/36X36inch/ large size to use in daily life, you can simply trim the sheet into wanted shape or size to satisfy your various projects, thickness 6mm, 21oz./sq. yd.
  • ✅【Reliale material】 This welding blanket protection is made of carbon fiber fabric, durable and reliable to use, can provide ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime..
  • ✅【High temperature resistance】: The welding blanket can withstand high temperature, you could do welding works or daily use. Reflective temperature of 1000F, withstands radiant heat up to 2000F.
  • ✅【Convenient to apply】: Great efficiency in heating and cooling. Widely used for draping over equipment or floor surfaces in welding areas,or as a vertical shield to protect from sparks,spatter,and slag.
  • ✅【After-Sale Guarantee】—- We offer lifetime service for welding blanket from our store. Any issue about this carbon fiber welding blanket, please feel free to contact us..
Check Stock

HANSWAY High Temp 18\ X 24\ X 1/8\ Carbon Fiber Welding Blanket Protect Work Area from Sparks & Splatte (18 x 24 inches)

  • ✅【Reliale material】 This welding blanket protection is made of carbon fiber fabric, durable and reliable to use, can provide ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime..
  • ✅【Suitable Size】the aluminized fiberglass sheet measures 18 x 24 inch/24X36inch/36X36inch/ large size to use in daily life, you can simply trim the sheet into wanted shape or size to satisfy your various projects.
  • ✅【High temperature resistance】: The welding blanket can withstand high temperature, you could do welding works or daily use. Reflective temperature of 1000F, withstands radiant heat up to 2000F.
  • ✅【Convenient to apply】: Great efficiency in heating and cooling. Widely used for draping over equipment or floor surfaces in welding areas,or as a vertical shield to protect from sparks,spatter,and slag.
  • ✅【After-Sale Guarantee】—- We offer lifetime service for welding blanket from our store. Any issue about this carbon fiber welding blanket, please feel free to contact us..
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Katofa Vehicle Panel Spot Puller Dent Spotter 3500A Spot Welder Dent Puller for Car Auto Panel Dent Bonnet Door Repair 110V Spotter Welding Machine

  • ★ [Main functions]--Carbon rod warming and tempering, washer welding, sheet upsetting, needle welding, wiggle wire welding and so on..
  • ★ [Application]--Sheet metal fire, meson, straight pull, spot welding, flattening, wave line, stud, OT film, triangular and so on..
  • ★ [Feature]--110V, 3500A. Intuitive, the control knob enables selection of both the output power and the requested mode.More intelligent and welding....
  • ★ [Easy to use]-- Manual, the weld is simply controlled by a light press of the gun trigger.The machine thermal protection will work when the main....
  • ★ [Quality Guarantee]--We provide 1 month warranty for free return and 6 monthes for free replacement part in case of non-human reasons！！.
Check Stock