Reviews Welding Leads
300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder
- ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
- ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
- ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
- ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
- ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check StockCANAWELD Arc Welding Stick Welder MMA 201 MADE IN CANADA 200 Amp TIG Welder (LIFT) Weld up to electrode #4 IGBT Inverter Lightweight 220V(150 A @%100 Duty Cycle) Generator compatibale (MMA 201)
- ✅High power output, 150A @ 100% Duty Cycle & 200A @ 30% Duty Cycle. Tested in (104°F /40°C), designed for the toughest conditions. Carrying belt for easy transportation..
- ✅Two available welding process: Stick and TIG (Lift). Ability to use up to 165 feet (50 meters) leads without any power loss at the weld. Excellent welding characteristics with any type of rods..
- ✅Automatic hot start which improves the arc striking with the most difficult rods. Arc Force Function to automatically select the best welding arc dynamics..
- ✅Electrode anti-Sticking function. Ability to work outdoors with adequate power generator. Fan cooled and thermally protected against overheating..
- ✅Large size Dinse style welding connectors. Metal face panel. Comprehensive 3 Year Warranty..
Check StockClore Automotive Jump-N-Carry JNC770R 1700 Peak Amp Premium 12 Volt Jump Starter - Red
Check StockCANAWELD Arc Welding Portable Inverter Stick welder 162 D Made in Canada 160 Amp Stick Welder TIG Welder Ability to Select between 120 V & 240 V IGBT Inverter Generator compatible
- Excellent arc characteristics with all types of rods up to 5/32”. Low power consumption..
- Ability to work outdoors with adequate power generator. Fan cooled and thermally protected against overloading..
- Light weight, Carrying belt for easy transportation. Ability to use up to 165 feet (50 meters) leads without any power loss at the weld..
- Two available welding processes Stick and TIG (Lift). Tested in (104°F /40°C), designed for the toughest conditions..
- Large size Dinse style welding connectors. Metal faced panel. Comprehensive 3 Year Warranty..
Check StockJump-N-Carry 1700 Peak Amp 12 Volt Jump Starter (KKC-660)
- Perfect for a variety of professional starting environments, including automotive service, fleet service, auto dealerships, auto auctions, marinas, implement dealerships and more.
- Give it a try and you'll see why it's the choice of Pros the world around 1700 Peak Amps 425 Cranking Amps Clore PROFORMER battery technology 46" #2 AWG welding cable leads Industrial-grade clamps.
- Built-in charger Automatic charging Voltmeter provides charge status of onboard battery.
Check StockDewalt Adjustable Height Portable Steel Welding Sawhorse, Double-Locking Legs, Pipe Saddles, 1,100 lb Weight Capacity
- Steel construction - durable steel sawhorse construction with a distributed weight capacity of up to 1,100-pounds.
- Mounting options - strategically located 3/4-inch diameter post holes for mounting and clamping any shape project.
- Pipe saddles - two V-shaped, toothed notches hold pipes and other stock for cutting and welding.
- Double locking legs - table legs have both tension latch locks and locking pins for added security when under load.
- Grounding stud - conveniently located grounding stud for connecting grounding clamps and leads.
Check StockDewalt Adjustable Height Portable Steel Welding Table and Work Bench 18 x 46-inch Tabletop Folding Legs Carrying Handle and Cord Minder
- Steel construction - durable steel construction with an even distributed weight capacity of 1000-pounds.
- Mounting options - strategically located slots / post holes for mounting and clamping any shape project.
- Tabletop or stand-alone - useable folded up atop existing work table or as a 36-inch tall free-standing welding station.
- Double locking legs - table legs have both spring pin / snap button locks and locking for added security under load.
- Grounding stud - conveniently located ground stud for connecting grounding clamps and leads.
Check StockOWOFYDR 1N5408 Rectifier diode 3A 1000V 3A 1000V axial Electronic Silicon diode DO-201AD(DO-27) (50pcs)
- 1. Diode model: 1N5408, forward rectification current: 3A.
- maximum repetitive peak reverse voltage: 1000V.
- 2. Features: low reverse leakage/high forward surge current capability/high current capability/high temperature welding.
- 3. Lead-free RoHS-compliant electronic components/molded plastic housing/plated axial leads/through holes.
- 4. Polarity: The ribbon represents the cathode, and the detailed specification data is shown in the sub-picture of the product.
- 5. Packed in ESD self-sealing bags with clear labels, which is convenient for you to confirm the model parameters and prevent static electricity generated by friction from damaging electronic materials..
Check StockANBES Soldering Iron Kit, Upgraded 60W Adjustable Temperature Welding Tool with ON-OFF Switch, 8-in-1 Screwdrivers, 2pcs Soldering Iron Tips, Solder Sucker, Wire Cutter,Tweezers,Soldering Iron Stand
- Soldering Iron with ON-OFF Switch- The soldering iron set with on-off switch, it is convenience for you to turn it off anytime if you don't need to use it. At the same time, it can avoid long hours of work, saving energy and ensuring safe welding..
- Adjustable Temperature & Heat UP Quickly- The 60W soldering iron heat up very quickly with a ceramic tube and the adjustable temperature welding tools can adjust the temperature between 200 - 450(392 - 842)..
- Wire Cutter with Anti-Slip Handle- A wire cutter with the anti-slip handle, it can provide a comfortable feeling when you use it. Easier to operate than wire stripper cutter and comfortable. You can easy to cut the wire and strip the wire insulation material and don't need to rotate the cable..
- 8 in 1 Multifunctional Screwdriver- A screwdriver with 8 replaceable magnetic bits, and the magnetic base can suck screws tightly, loosing and fixing various screws easily..
- Widely Used & Portable Carry- The soldering iron kit is great for home DIY, welding circuit board and electric repair. The PU carry Bag with a fashionable design and you can store all the soldering iron tools, you can take it anywhere.DescriptionANBES Soldering Iron Kit design for various uses,from home DIY,electrical repairs jobs and....
Check Stock150 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #4 AWG cable (15 FEET)
- Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #4 AWG - 0.343" O.D..
- Electrode Holder compatible with AF-3. Constructed with Heavy Duty Nylon body. High conductivity jaws and cable connectors. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4"..
- Dinse 10-25 Cable Connector. ***Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
- RATED: 150 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
- Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..
Check StockOWOFYDR 10SQ045 15SQ045 20SQ045 Schottky diode 10A 45V/15A 45V/20A 45V Solar Panel axial Electronic Silicon diode R-6 (30pcs)
- 1. Diode model: 10SQ045/15SQ045/15SQ045, 10pcs for each model, 30pcs in total..
- 2. Features: low reverse leakage/high forward surge current capability/high current capability/high temperature welding.
- 3. Lead-free RoHS-compliant electronic components/molded plastic housing/plated axial leads/through holes.
- 4. Polarity: The ribbon represents the cathode, and the detailed specification data is shown in the sub-picture of the product.
- 5. Packed in an ESD self-sealing bag with clear labels, which is convenient for you to confirm the model parameters and prevent static electricity generated by friction from damaging electronic materials..
Check StockSolid Metal Barrel Mechanical Carpenter Pencil Set with 12 Refills, Construction Marker Tool with Built-in Sharpener for Woodworking, Holder with Long Nose for Deep Hole Marking, Welding and Carpentry
- ...in) diameter and 120m (4.7 in) long refills are hard to break and fit for the KOREKT mechanical carpenter pencil, providing the right amount of lead with only a 1-Click advance.
- ✅ 【Widely Applicable】Imagine a longlife mechanical scriber suitable for a wide variety of jobs in construction, carpentry, flooring, welding, and maintenance. The mechanical pen can draw on concrete, metal, plastic, ceramics, wood, and paper. This tool is perfect to use by carpenters, architects, and builders for drawing precise markings on a variety of surfaces.
- ✅ 【Built in Sharpener】Because you always need it for precision marks, there is an embedded sharpener on the top of the deep hole construction pen. The practical red sharpener can be easily detached and screwed back into the top of the mechanical holder without risking getting lost.
- ✅ 【Heavy Duty Resistance】We designed this heavy-duty mechanical welder pencil for use in the toughest jobs from various industries but if for ANY reason you are not satisfied, you will receive a refund. Click on the "Add to Cart" button NOW and get this amazing product!.
Check Stock150 Amp Welding Ground Clamp Lead Assembly - Dinse 10-25 Connector - #4 AWG cable (15 FEET)
- Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #4 AWG - 0.343" O.D..
- Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing.
- Dinse 10-25 Cable Connector. ***Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
- RATED: 150 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
- Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..
Check Stock