Reviews Welding Angle Clamping Tools

TEXALAN 4 Two Axis 90 Degree Cast Iron Welders Welding Angle Clamp

  • [CLAMPING RANGE]: Width of jaw is 4" (100mm), and Max.opening is 3" ( 75mm).
  • [FEATURES]: Unobstructed working area allows free access for welding or assembly operations and through-ways for T joints..
  • [SPINDLE]: Two-way swivel mounted spindle automatically adjusts the clamping block to work pieces of different thicknesses..
  • [APPLICATION]: Mainly used for iron products angle welding. Ensure welding into right angle (90 degrees), square, rectangle and other steel products..
Check Stock

WETOLS Angle Clamp - 90 Degree Right Angle Clamp - Single Handle Corner Clamp with Adjustable Swing Jaw Aluminum Alloy for Woodworking, Photo Framing, Welding and Framing - WE705…

  • 【Trustworthy Quality】：WETOLS 90°right angle clamp is uniquely prepared with the aluminum alloy die-casting based construction, where high durability and well-built design are conveyed to ensure long-lasting use..
  • 【Clamping Range】: Maximum clamping range is approx. 2.75in/70mm.
  • jaw depth: 1.4in/35mm, allowing two different thicknesses wood block to be connected at right angle.It can accommodate most large things including metal tube, steel rod, wood, thick glass, and more..
  • 【Swing Jaw Design】: Wood Clamp's single-handle jaw can be rotated in two-way, making clamping more convenient and holding work pieces precisely..
  • 【Ergonomic Design】：Anti-skid handle is nicely covered with rubber to ensure users’ comfort for hands. Whether for professional use or DIY use, WETOLS 90-degree corner clamps are absolutely useful tools to choose..
  • 【Versatile Use】: WETOLS Wood Clamp is perfect for welding, framing, drilling, doweling, woodworking, making cabinet, installing furniture, box and picture frames, etc..
Check Stock

90 Degree Clamp, Cabinet Clamp, 5.5" x 5.5"(14 x 14cm) Aluminum Alloy Right Angle square Tool, Corner Clamps for Woodworking Tools, Right Angle Clamp, Drawers, Picture Frame (4pack)

  • Our clamping square tools are machined from aluminum alloy and stainless steel, the surface is anodized, corrosion-resistant, not easy to fade, and extremely fine workmanship..
  • This corner clamps for woodworking tools has two measurement units, metric and imperial. It is laser-engraved and the scale is on the front of the product.The measurement length is accurate and easy to read..
  • wood working tools and equipment show that this size set is a scientific and appropriate length size selection.It can work with a clamping tool to check and position the corner for wood board jointing to gluing up or welding at a right angle..
  • The actual use of professional wood working work and sales volume shows that this size (140mm/5.5 inch ) of clamping squares are a very scientific and suitable length size choice..
  • Best choice for your box woodworking work. We provide a one-year warranty service and opened a 24-hour customer service hotline.It is a unique gift for men, fathers, husbands, woodworkers..
Check Stock

WETOLS Angle Clamp 2pcs - 90 Degree Right Angle Clamp - Single Handle Corner Clamp with Adjustable Swing Jaw Aluminum Alloy for Woodworking, Photo Framing, Welding and Framing - WE716

  • 【Trustworthy Quality】：WETOLS 90° right angle clamp is uniquely prepared with the aluminum alloy die-casting based construction, where high durability and well-built design are conveyed to ensure long-lasting use..
  • 【Clamping Range】: Maximum clamping range is approx. 2.75in/70mm.
  • jaw depth: 1.4in/35mm, allowing two different thicknesses wood block to be connected at right angle. It can accommodate most large things including metal tube, steel rod, wood, thick glass, and more..
  • 【Swing Jaw Design】: Wood Clamp's single-handle jaw can be rotated in two-way, making clamping more convenient and holding work pieces precisely..
  • 【Ergonomic Design】：Anti-skid handle is nicely covered with rubber to ensure users’ comfort for hands. Whether for professional use or DIY use, WETOLS 90-degree corner clamps are absolutely useful tools to choose..
  • 【Versatile Use】: WETOLS Wood Clamp is perfect for welding, framing, drilling, doweling, woodworking, making cabinet, installing furniture, box and picture frames, etc..
Check Stock

HFS R Two Axis Welding Clamp 4

  • [Material]: Durable right angle clamp, made of cast iron. Allows two wood block of different thicknesses to be joined at a 90 degree angle..
  • [Size]: 4'', Width of jaw 100mm,and Max.opening 75mm, can clamp materials like steel rod, metal tube, wood, thick glass, etc..
  • [Unique Design]: Sliding T-shaped single handle with adjustable rotary jaw to align and hold work pieces precisely. Solid and anti-skid, helps to set....
  • [Application]: Mainly uesd for iron products angle welding..
  • Can be used as a clamping device for 90° corner joints. Perfect for aligning, nailing, woodworking, welding, screwing, making cabinets, box and....
Check Stock

HFS (R) Two Axis Welding Clamp (3'')

  • [Material]: Durable right angle clamp, made of cast iron. Allows two wood block of different thicknesses to be joined at a 90 degree angle..
  • [Size]: 3'', Width of jaw 75mm,and Max.opening 60mm, can clamp materials like steel rod, metal tube, wood, thick glass, etc..
  • [Unique Design]: Sliding T-shaped single handle with adjustable rotary jaw to align and hold work pieces precisely. Solid and anti-skid, helps to set up instantly and secure quickly..
  • [Application]: Mainly uesd for iron products angle welding..
  • Can be used as a clamping device for 90° corner joints. Perfect for aligning, nailing, woodworking, welding, screwing, making cabinets, box and picture frames..
Check Stock

Rotary Welding Positioner Turntable Table, Welding Positioning Turntable Jaw Lathe Chuck Equipment Adjust Speed 0-90º 110V

  • 【Smooth Rotation】This Rotary Welding Positioner is driven by 15W High-quality DC motor, rotate smoothly & stable.
  • Rotating speed: 2-10 r/min. Using foot switch control table rotation, easy to control rotation..
  • 【High-quality DC Motor】High-quality DC motor, the worktable running smoothly, welding speed can be stepless regulation, large adjustment range, high adjustment precision..
  • 【0-90º Tiltable Table】0-90º table turning angle tiltable of welding positioner, can fix it at any angle with tilt lock wrenches. Clamp and worktable choose simple mechanical connection way, high positioning accuracy..
  • 【Function】BY series Light Positioner is mainly used for welding of annular weld. The main function of the machine is to tilt, turn the workpiece, so that the weld in the horizontal, ship-shape, such as the best position to apply welding..
  • 【Wide Application】For working table or specific tooling for clamping workpiece with manual welding,welding operation machine to achieve automatic welding, and for cutting, grinding, assembly, testing and other processes. Especially suitable for under 10KG flange, steel pipe and other seam welding..
Check Stock

DBM IMPORTS Set 2 Pc Adjustable 3/4'' T-Slot Hold Down Clamp 5/8''-11 Clamping Range

  • A slidable T-shaped single handle with adjustable rotating jaws can accurately align and fix the workpiece. Rugged and non-slip, it helps to set up and fasten quickly..
  • The maximum clamping range is about 2.68 inches / 68 mm.
  • jaw depth: 1.4 inches / 35 mm, which can clamp steel rods, metal pipes, wood, and thick glass materials..
  • Swing jaw design, single handle jaw can rotate in both directions. The precise right-angle clamping tool is an essential tool for carpenters, handymen and DIY workers..
  • It can be used as a clamping device for 90° angle seams. Very suitable for aligning, nailing, carpentry, welding, screwing, making cabinets, boxes and photo frames..
  • The non-slip rubber handle is suitable for holding in the hand for a long time and is comfortable. The angle can be adjusted freely to meet different needs..
Check Stock

IRWIN VISE-GRIP Original Locking Pliers with Swivel Pads, 11-Inch (20)

  • COMFORTABLE HANDLE AND ADJUSTABLE SCREWS - The handle of the C-clamp locking pliers adopt an ergonomic design, is easy to open, has good comfort and control, and can be grasped from any angle to provide better grip. The C-clamp welding tools come with adjustable screws to adjust size and pressure to provide firm clamping force during work..
  • WIDE RANGE OF USES - The C-clamp locking pliers have a wide range of uses. The large opening jaws can fix and clamp objects of various shapes and materials, which are very suitable for wood working, welding, electrician maintenance and so on. In addition, the product has multiple rivets for fixing the pliers, which is firm and stable. Come and use it, you will like it !.
  • SATISFIED SERVICE - Our integrity is supreme and we attach great importance to product quality and customer satisfaction. We offer 30 days’ money back guarantee. If you have any question with the C-clamp locking pliers, please feel free to contact us for details..
Check Stock

ABN Arrow Welding Magnet – Metal Working Tools and Equipment, 45, 90, 135 Degree Angle Magnet, 4 Pack of 50 Lb Magnet

  • METAL HOLDER FOR WELDING AND SOLDERING: The ABN Arrow Angle Welding Magnets easily angle and hold your metal projects together before fusing the pieces together to allow hands free welding.
  • These heavy duty powerful angle magnets stick solidly to any ferrous metal object and the bright red color will help you locate it easily.
  • This 4 pack magnet set includes (4) 4 inch (10.2 cm) magnets that can hold up to 50 lbs of weight (22.7 kg).
  • GET THE PERFECT ANGLE: Magnetic angle welding tools and accessories are designed to hold metal pieces together so you can safely work with both hands.
  • Each welding angle magnet is designed with an arrow shape to allow you to work with different angles while welding, soldering, or installing metalwork.
  • Each magnetic welding holder provides 45, 90, and 135-degree angles.
  • HANDS FREE WELDING ACCESSORIES: Rather than having to use magnetic welding clamps that need to be readjusted and moved while welding, these magnetic welding holders hold your metal pieces together at a variety of angles allowing you to work through without having to pause to move them.
  • The combined weight of a 4 pack makes it easy to work with heavy pieces of metal.
  • VARIETY OF APPLICATIONS: Whether you are welding soldering, assembly, marking off, o....
Check Stock

MAXPOWER 4PCS Locking Pliers Clamp Set, 7 inch 90 degree Offset Locking Pliers, 7 inch Locking Pinch Off Pliers, 9 inch U Shaped Jaw Locking Pliers, 8 inch Locking Sheet Metal Clamp

  • 90° Jaw left angle locking pliers x 7" Length, Max opening capacity 2-3/4" (70mm), Throth Depth 2-3/4" (70mm), Long nose jaw make clamping and holding parts, nuts and bolts easier access into narrow and deep tight space.
  • Locking Sheet Metal Clamp x 8" Length, Clamping range of 1-3/16" mm (30mm), For tightening, bending and crimping thin sheet steel.
  • U-shaped Welding Pliers x 9" Length, Clamping range of 2-5/16" (60mm), For clamping profiled, pipes or flat material.
  • Locking Pinch Off Pliers x 7" Length, pinch-off and locks on to tubing, suit for blocking flow of gas, Use only to pinch off soft copper, aluminum or any soft metal tubing.
  • There's a hex Hole on knurled thumb screw for using with hex keys( NOT included ), Offering more tightens to adjust pressure and draw materials together.
  • MAXPOWER Locking welding pliers and clamps set, Constructed with chrome-vanadium steel jaws with nickel plated finish.
Check Stock

TFCFL Turntable Table, DC24V 20W Rotary Welding Positioner Turntable Table High Positioning Accuracy Suitable for Cutting, Grinding, Assembly, Testing and Other Seam Welding (10KG)

  • manual workbench rollover, 18cm worktable, compatible KC-65 or KC-80 chuck. BY series Light Positioner is mainly used for welding of annular weld..
  • √ 【Easy Operation】Structure of precision, light weight, easy to operate, flexible to use. The device can be fixed on the working table or specific tooling for clamping workpiece with manual welding, can also be used with welding operation machine to achieve automatic welding, but also for cutting, grinding, assembly, testing and other processes..
  • √ 【High Accuracy】The main function of the machine is to tilt, turn the workpiece, so that the weld in the horizontal, ship-shape, such as the best position to apply welding. Using foot switch control table rotation, easy to control rotation.
  • Clamp and worktable Choose simple mechanical connection way, high positioning accuracy.
  • Anti-electromagnetic design, efficiently reduce high frequency interference on TIG welding..
  • √ 【Rotary Welding Positioner Turntable Table Application】Especially suitable for under 10KG flange, steel pipe and other seam welding. Used for annular welding, cutting, polishing, assembling etc. Support CO2 welding, MIG, MAG, TIG welding etc. Also for cutting, grinding, assembly, testing and other processes..
Check Stock

Housolution Right Angle Clamp, [2 PACK] Single Handle 90° Aluminum Alloy Corner Clamp, Right Angle Clip Clamp Tool Woodworking Photo Frame Vise Holder with Adjustable Swing Jaw - Silver Gray

  • Durable right angle clamp, made of premium aluminum alloy die-casting material. Allows two wood block of different thicknesses to be joined at a 90 degree angle..
  • Rubberized single handle with adjustable rotary jaw to align and hold work pieces precisely. Solid and anti-skid, helps to set up instantly and secure quickly..
  • Maximum clamping range is approx. 2.68in/68mm.
  • jaw depth: 1.4in/35mm, can clamp materials like steel rod, metal tube, wood, thick glass, etc..
  • Swing jaw design, single handle jaw two-way rotation can be adjusted. Precision right angle clamping tool, a must-have for woodworkers, handymen and DIY'ers alike..
  • Can be used as a clamping device for 90° corner joints. Perfect for aligning, nailing, woodworking, welding, screwing, making cabinets, box and picture frames..
Check Stock