Reviews Vertical Axis

Pikasola Wind Turbine 200W max 220W 12V 5 Blade Wind Vertical Axis Generator 3 Phase AC Permanent Magnet Generator Wind Turbine Kit with Controller for Hybrid Wind Solar System

  • 1.（-Safety-）: 5-leaf double-axis vertical blade design, which looks like a Red lantern. Safety factor is high due to blades be fixed inside by a flange, then not risk of blade falling off..
  • 2.（-High Wind Energy Utilization-）: Wind blades adopt reinforced fiber nylon which more durable and strong ability of Anti-wind. Especially with optimized aerodynamic shape and structural design, has a High wind energy utilization. Wind turbine can start by breeze and adapt to 360° wind, no yaw system is needed..
  • 3. (-Quietly-): The vertical wind turbine is quieter than horizontal axis turbine. Double bearings make it more stable and not easy to shake when wind generator is running. Silent rotation, suitable for home, boat, marine, monitoring use, solar and wind hybrid street lighting system..
  • 4. (-Excellent Generator-): Permanent magnet three-phase alternating current can reduce the resistance torque of wind generator effectively. Also make the wind wheel and the generator matching better and then running more reliability..
  • 5. (-Installation convenience-): Vertical axis wind turbine can use a screw pile foundation. It is a cost reduction and easy&quick installation compare with concrete foundation installation. Screw pile foundation can be fully recycled at ....
Check Stock

Brunton Axis 360 Compass

  • Innovative dual-axis for every angle, every direction.
  • Significant new twist on the pocket transit.
  • Hollow hinge for efficient, accurate measurements.
  • Measures planes, lines, bearings and vertical angles.
  • Novel lid Protractor & rotation around minor Axis.
Check Stock

Wind & Weather Outdoor Horizontal Cup Metal Garden Wind Spinner 28 W x 25 D x 73 H

  • Horizontal s-shaped arms rotate around the vertical axis.
  • Vertical rotors also feature colorful faux crystals.
  • Metal post installs securely in the ground.
Check Stock

Hamskea Archery Solutions Easy Third Axis Target Hunting Sight Level & Instructional DVD Combo Kit (Optional), Black

  • MAXIMUM ACCURACY - The Easy Third Axis Level enables all archers to adjust their target and hunting sight for 1st, 2nd and 3rd axis to achieve the maximum accuracy for any shot angle and distance.
  • CORRECT ADJUSTMENT - Without your axis adjusted correctly, your impact point will vary depending on the severity of the shot angle and distance.
  • EASY TO USE - The Easy Third Axis Level is easy to use as it mounts to your sight’s vertical sight bar (for target sights) or to the riser’s sight window (for hunting sights) with the non-marring nylon tipped thumb screw.
  • PACKAGING - 101001 includes string level machined groove, non-marring nylon tipped thumb screw.
  • 106001 includes string level machined groove, non-marring nylon tipped thumb screw, and "Sight Leveling Made Easy instructional DVD".
  • BLACK ANODIZED FINISH - It has a hard-anodized finish and comes with a carrying drawstring pouch.
Check Stock

FOTYRIG Camera Level Hot Shoe Level 3 Axis Bubble Spirit Level Standard Shoe Mount Compatible with Nikon, Olympus, Pentax Digital and Film Cameras

  • COMPATIBILITIES- Three axis spirit bubble level for Canon, Pentax, Olympus, etc. SLR/DSLR cameras (Fits most SLR/DSLR flash mounts/hot shoes (Minolta & Sony & NikonD5200, D500, D5100 ,D90, D7200, D3300,D300, D3200, D7100, D600, D7000 excluded!).
  • 3 axis spirit bubble level- ideal for Landscapes and architectural photography, the spirit level allows positioning of horizontal and vertical axis simultaneously..
  • Easy to use-the spirit level mounts effortlessly right into camera's hot shoe, and it can be easily placed on a flat portion of the camera, which corresponds to the Lens axis..
  • Size: 0.93"X0.93"X1.1" Net weight: 0.56oz.
  • Made of crystal clear acrylic, being light, in a small size, high quality and novelty design..
Check Stock

Anwenk Hot Shoe Level Camera Bubble Level Hot Shoe Spirit Level Hot Shoe Cover (Includes 3 Axis Bubble Level, 2 Axis Bubble Level and 1 Axis Hot Shoe Cover) Combo Pack

  • Combo Pack- Package includes 1X Three Axis Hot Shoe Level.
  • 2X Hot Shoe Cover. Easily serve your demands. With these combo pack hot shoe level and hot shoe cover, you can take a level photo and dont have to straighten your photos in Photoshop..
  • 3 Axis & 2Axis Hot Shoe Bubble Level- The camera bubble level is idea for landscapes and architectural photography that allows positioning of horizontal and vertical axis simultaneously..
  • Hot Shoe Cover- Help keep the camera LEVEL and ,protect your hot shoe from getting bent or damaged..
  • Widely Compatible- The hoe shoe level and hot shoe cover are compatible with standard camera shoe for Canon Nikon Panasonic Fujifilm Olympus Pentax Sigma DSLR/SLR/EVIL Camera and more!.
  • Easy to Use- Simply slides into the camera hot shoe. Note: Please mind the hot shoe cover install direction..
Check Stock

SOPOGER Archery 3rd Axis Bow Sight Level Adjustment Tuning Leveler Target Mounting Leveling Tool Combo Kit Archery Shooting Accuracy Calibrator Precision Bubble Level for Compound Recurve Bow Sight

  • Why use it: The Third Axis Level enables all archers to adjust their target and hunting sight for 1st, 2nd and 3rd axis to achieve the maximum accuracy for any shot angle and distance. Without your axis adjusted correctly, your impact point will vary depending on the severity of the shot angle and distance..
  • Use Scenarios: The Easy Third Axis Level is easy to use as it mounts to your sight’s vertical sight bar (for target sights) or to the riser’s sight window (for hunting sights) with the non-marring nylon tipped thumb screw..
  • Feature: Completely New Design to Achieve Most Stabilized and Controlled Adjustment.Easily and accurately adjust your bow sight with the adjustment tool..
  • Scientific Structure Design: Reasonable structure design is more stable, more precise, more friendly to the contact surface.Small size allows for convenient storage and transport,check your sight level settings anytime..
  • Package Included: 2 Third Axis Level+1 Threaded Rod+1 Pendant+1 Red Line.
Check Stock

U.S. Rifles, Cal. .30, M1903, M1903A1, M1903A3 and M1903A4: TM 9-1270 Ordnance Maintenance

  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms with integrated level bubble. Comes with both #6 and #8 screws for compatibility with both older and newer Savage Axis models..
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Integrated level bubble built into the rear of the rail to check for consistent vertical alignment of your rifle.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Ozeri Brezza II Dual Oscillating 10' High Velocity Desk Fan, Black

  • Now featuring powerful yet ultra-quiet DUAL oscillating motors designed to cool an entire room more efficiently with automatic horizontal AND vertical motion..
  • Front-controls provide easy-access to engage automatic vertical (up/down) oscillation, horizontal (left/right) oscillation or non oscillation mode for uniform airflow..
  • Aerodynamically designed for the lowest dB noise rating while providing air circulation at 3 different speeds..
  • Push button access to non-oscillating mode and can be adjusted up to 90 degrees on its vertical axis for precisely directed airflow..
  • Boasts a sophisticated and stylish space-saving design that complements and enhances room decor. Ships fully assembled. Satisfaction Guaranteed..
Check Stock

FLYCAM Comfort Stabilizing Arm & Vest for Flycam 5000/ 3000/DSLR Nano Handheld Camera Video Steadycam Stabilizer up to 5kg

  • Aluminum constructed handheld stabilizer lets you capture stable & smooth gliding shots.
  • Micro balancing feature on camera platform helps to quickly & precisely maintain horizontal balance.
  • CNC machined 3-Axis gimbal with soft grip handle for rotational camera control with easy ‘on axis’ movement.
  • Tool-less Telescopic central post for vertical balance.
  • weight discs to maintain dynamic balance.
Check Stock

Stabila LAR350 Fully Self-Leveling Rotary Laser 9-piece Kit Interior/Exterior Horizontal, Vertical Levelling, Dual-Slope, Section Mode, LED Assist, Manual Alignment, Motion Control and Plumb Lines

  • The STABILA LAR-350 is an easy-to-use rotation laser for horizontal and vertical levelling, including obtaining plumb lines. Fully automatic motor-driven rotation laser for horizontal and vertical applications as well as manual inclination in two axes. Innovative MOTION CONTROL quick, reliable and convenient laser operation by rotating the remote control..
  • DUAL SLOPE inclination function controlled inclination setting of up to 5 degrees on two axes. SECTION MODE working area which can be limited as required in rotation mode. The laser beam is only emitted in a defined area..
  • LED ASSIST system for easy operation and safety in the workplace. Integrated LEDs indicate, for example, which axis is currently tilted or is being tilted. MANUAL ALIGNMENT function pivoting an axis in vertical operation..
  • Patented STABILA PROTECTOR system perfect protection, even when the laser is dropped from a tripod at a height of up to 5.9 feet. Waterproof and dustproof in accordance with protection class IP 65. Large working area with REC 300 Digital set receiver, up to 2624.67 feet in diameter..
  • Includes: Stabila LAR 350 rotation laser - Made In Germany, Stabila REC 300 Digital receiver - Made In Germany, Stabila RC-LAR350 remote control - Made In Germany, 90 degree angle....
Check Stock

FLYCAM 5000 29"/73cm Professional Video Camera Stabilizer with Arm Brace and Body Pod System for Cameras up to 5kg/11lbs | Free Quick Release Plate & Table Clamp (FLCM-5000-BPAB)

  • Aluminium made handheld stabilizer lets you achieve stable & smooth gliding movements.
  • The top plate can be adjusted on both X & Y axis to get horizontal balance. Quick release plate allows quick mounting & dismounting of camera.
  • CNC machined 3-axis gimbal with ball bearings provides rotational camera control with easy ‘on axis’ movement.
  • Vertical balance can be achieved by changing the length of telescopic central post, and by varying amount of counterweights on the base platform you can adjust dynamic balance.
  • Free Table Clamp & Quick Release Plate. 100% Quality Assurance Guarantee. Buy with Confidence..
Check Stock

FLYCAM 5000 29 /73cm Professional Video Camera Stabilizer with Arm Brace for Cameras up to 5kg/11lb | Handheld Steadycam for DV DSLR Nikon Canon Sony | Free Quick Release & Table Clamp FLCM-5000-ABQ

  • Aluminium made handheld stabilizer lets you achieve stable & smooth gliding movements.
  • The top plate can be adjusted on both X & Y axis to get horizontal balance. Quick release plate allows quick mounting & dismounting of camera.
  • CNC machined 3-axis gimbal with ball bearings provides rotational camera control with easy ‘on axis’ movement.
  • Vertical balance can be achieved by changing the length of telescopic central post, and by varying amount of counterweights on the base platform you....
  • Free Table Clamp & Quick Release Plate. 100% Quality Assurance Guarantee. Buy with Confidence..
Check Stock