Reviews Axis Wheels

Astromania Deluxe Off-Axis Guider for Astrophotography

  • 1) Can be used with correctors & DSLR: The only Off Axis Guider that can be used between a coma corrector (or field flattener) and a DSLR camera without leaving the tolerance for the distance between camera and corrector. 2) Can be used with cooled CCD cameras: The off axis guider provides enough space for filter wheels or filter drawers when using cooled CCD cameras..
  • Place the OAG behind the corrector: The Astromania OAG is used between the corrector and the camera. Using an off axis guider in front of the corrector is not useful. The guide star would be distorted, the distances on both optical paths are too different and you might even get focusing problems with the main camera. Behind the corrector you can avoid these problems, but this only works due to he low profile of the Astromania OAG!.
  • Large Clear Aperture: Compared with many simpler guiders the Astromania OAG not only has a shorter overall length, but also a larger clear aperture. A "T2 keyhole" can be avoided, resulting in better illumination for large sensor cameras up to 45mm diagonal.The load for the mount is much reduced. There is no need for a guide scope and the setup will remain more compact. You work with the main telescope's resolution and focal length, not with the typically lo....
Check Stock

WEN 33075T 11-Amp Variable Speed 16-Inch Benchtop Milling Machine with Digital Readout and Extra-Large Mill Table

  • Variable speed operation ranges from 100 to 2000 RPM while the LED monitor displays the current spindle speed.
  • Spacious 27.6 by 6.3-inch work table combined with the 14.5-inch max distance between spindle and table provides ample room for larger workpieces.
  • Table travels 19.75 inches along the X-axis and 6.5 inches along the Y-axis while the headstock travels 9.75 inches along the Z-axis.
  • Digital Z-axis DRO depth gauge showcases exact spindle travel for maximum precision.
  • Includes an R8 spindle taper, a 2.75-inch spindle travel, a pre-installed drill chuck (1/32 to 3/4 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an emergency stop button, onboard measurement indicators, a 15-inch swing, two M10-1.5 T-nuts, 12mm T-slots, and a two-year warranty.
Check Stock

HICTOP Al13-310 3D Printer with Linear Guide Rail on All Axis Auto Leveling Filament Sensor Metal Large Print Size 300*300*290mm

  • 1. There is a linear guide rail and a screw rod in each axis of the HICTOP Al13-310 3D printer which can greatly improve the printing accuracy..
  • 2.One X axis, double Y axis, and double Z axis of this metal 3d printer are exactly the same with each other if any axis is damaged, it can be replaced directly, which improves the convenience of maintenance..
  • 3. Al13-310 3D printer supports high-speed printing of 300mm/s, we suggest you to print at normal speed for the first layer and add the speed to 300mm/s after the first layer finishes. Special PLA for fast speed 3D printer prints better and normal PLA can also print very well..
  • 4. This printer is reallly easy to use for beginners as leveling the bed is supper easy, you can auto level or manual level the bed and changing the Z offset and no need to roll the wheels under the bed..
  • 5. 32-bit silent motherboard and TMC2209 stepper driver effectively reduce working noise，it is about 55 decibel when printing, not exclusive ultra-quiet but still quite quiet for printer with this structure..
Check Stock

VEVOR Rotary Axis Attachment, 4 Wheels Laser Rotary Attachment, 57 Stepper Motor Laser Cutter Rotary, 50 mm-350 mm Carve Length for Engraving Cutting Machine Spherical Carving Cylinder Carving

  • 【PREMIUM STEPPER MOTOR】 - This rotary cutter attachment features a 2-phase stepper motor with 4 leads. All you need to do is connect the 4 lines of this rotary tool to the dedicated port of the laser engraving machine and configure the settings in your software to start engraving..
  • 【4 WHEELS ROTARY AIXS】- The roller design of 4 wheels makes the rotation more stable. Constant rotation ensures synchronization with the laser head and does not defocus where the cylinder is engraving. The place where the cylinder is engraving is always on the focus of the laser focusing mirror..
  • 【DURABLE CONSTRUCTION】 - Our laser rotary axis is made of high-quality aluminum. With the roller-type design, wheels can move back and forth smoothly. Low working noise and high efficiency. It's your carving partner and provides an excellent carving experience with you..
Check Stock

Carmyra Portable Chainsaw Mill 36 Inches Planking Milling Bar Size 14 Inches to 36 Inches

  • ... a finely polished surface. With a green coating, the cast iron base is anti-rust and corrosion-resistant..
  • PRECISE & PRACTICAL - With 3 T grooves, the travel distance of the X axis is 200mm/ 8inches, the Y axis is 50mm/ 2inches. The hand wheel is on each side of the multifunction worktable. You can adjust the hand wheels to precisely control the travel distance in both directions. The laser-etched metric scale is on each hand wheel ensures the precision..
  • ADJUSTABLE LOCK-NUT - There are six pieces of adjustable lock-nuts on the base of the milling working table. 3 pieces on the X-axis and 3 on the Y-axis. You can slightly tighten the lock nuts if they get loosen on the table..
  • WIDE USAGE - The work table is designed to work with bench drills. It fits mini drills and electric drill brackets and is a good choice for DIY models. High quality structure can last for years of use..
  • SATISFACTION GUARANTEE - We promise to offer you a satisfying shopping experience with a refund guarantee within 30 days. If you have any dissatisfaction with our mill machines, please feel free to contact us. We’ll try our best to help you with all your questions or concerns..
Check Stock

Genmitsu 3020-PRO MAX CNC Router Machine for Metal Carving and more, GRBL Offline Controller, with Limit Switches & Emergency-Stop, XYZ Effective Working Area 300 x 200 x 72mm (11.8 x 7.9 x 2.8inch)

  • ...ches, emergency stop switches, Z-probe and more..
  • The pre-assembled module of XZ Axis Gantry and Base Assembly reduces the effort of assembly. You just need 3 main installation steps and wiring to start carving your projects. All stepper motors are equipped with manual jog wheels making it easy to adjust and position your spindle or stock material..
Check Stock

LittleMachineShop.com HiTorque Deluxe Mini Mill with DRO (4190)

  • Variable speed goes anywhere from 100 to 1,100 RPM on the low setting and 100 to 2,500 RPM on the high setting.
  • 18-1/8 x 4-3/4 inch table travels 11-13/16 inches along the X-axis and 5-1/8 inches along the Y-axis.
  • Bevel the head and column 45 degrees in either direction for angled cuts in metal, wood, plastic and more.
  • Compact cast iron design measures in at 23-1/4 by 22 by 29-1/2 inches in size with an 8-1/2 by 15 inch foot print.
  • Includes an R8 spindle taper, a pre-installed drill chuck (1/32 to 1/2 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an emergency stop button, onboard measurement indicators, a 13-inch swing, two M10-1.5 T-nuts, 12mm T-slots, and a two-year warranty.
Check Stock

Mecanum Wheel with Coupling 4PCS Omnidirectional Wheels 4WD Smart Robot Car Kit Accessories 65mm Robot Kit Drive Wheel for Arduino/Raspberry Pi DIY STEM Project

  • 003cp003e65mm engineering plastic mecanum wheels (2x left, 2x right) include 2 right wheels and 2 left wheels. Each wheel consists of 9 rollers and 003cb003ecan be driven independently.003c/b003e003c/p003e.
  • 003cp003eMecanum wheels can be moved 003cb003ein any direction without changing the direction003c/b003e of rotation of the wheels. Each of the four mecanum wheels contains a series of rollers whose axis of rotation makes a 45 ° angle to the plane of the wheel.003c/p003e.
  • 003cp003eThe mecanum wheels suitable for 003cb003eLego 003c/b003ecross shafts, can also be fitted with N20 motors by installing 3mm couplings, TT motors by installing TT motor couplings, GA25-370 by installing 4mm couplings, and 5mm couplings by installing with stepper motor.003c/p003e.
  • 003cp003eThis mecanum wheels used for 003cb003eRaspberry Pi 4/3B+/3003c/b003e,Micro:bit and 003cb003eArduino Project 003c/b003ecompatible with DC motor.003c/p003e.
  • 003cp003eThe mecanum wheel made of high hardness plastic,and 003cb003elow pulsating noise003c/b003e. Omnidirectional Wheels are not easy to damage. The mecanum wheels have a long service life and no deformation.003c/p003e.
Check Stock

OMTech 4-Wheel Rotary Cutter and Engraver Attachment with Nema 23 2-Phase Stepper Motor for 50W 60W 80W 100W 130W CO2 Laser Engraving Machine K40 Rotary Tool Accessory Kit for Wood and More

  • ENGRAVES ROUND SURFACES: This OMTech rotary axis can easily work with most laser engravers 50W or higher to let you perform 360° engravings on cylindrical and round objects such as cups, bottles, tubes, pipes, bowls, and more!.
  • 2 DRIVE WHEELS: With a 12-inch maximum distance between its two drive wheels, this rotary cutter and engraver attachment is ideal for round and irregular objects 2-14 inches long and 0.4-6 inches in diameter.
  • EASY INSTALLATION: You just need to connect the 4-wire attachment cable of this rotary tool to the dedicated port on your laser engraver and configure the settings in your software to get your carving started.
  • SMOOTH NOISE-FREE OPERATION: This rotary accessory tool kit features a precision-engineered tailstock that allows for smooth, efficient, and noise-free operation that is ideal for DIY, home, or industrial use.
  • SATISFACTION GUARANTEED: This rotary axis attachment comes with our usual strong warranty and friendly customer service to promise you a worry-free purchasing experience.
Check Stock

Axis Scientific Human Skeleton Model for Anatomy Bundle, 5' 6' Life Size Skeletal System, 206 Bones, Interactive Medical Replica 3 Year Warranty, Study Guide, Adjustable Rolling Stand, and Dust Cover

  • ...a Skeleton Product Manual detailing 172 advanced anatomical landmarks, a Skeleton Assembly Guide outlining the easy steps to assemble your skeleton, Skeleton Study and Numbering Guide, 189 Numbered Stickers to label the major landmarks of the human skeleton, 27 page full color educational guide, 5-Caster Stand with Wheels and a durable Dust Cover..
  • 3-YEAR WARRANTY - SATISFACTION GUARANTEED: Every Axis Scientific anatomy model comes with a no-hassle 3-year warranty. If there are any issues with your model just contact our US-based customer service team and we will replace or refund your purchase..
Check Stock

Accusize Industrial Tools 11 Pcs AXA Wedge Type Quick Change Tool Post Set for Lathe Swing 6 -12 incl 1 Cutoff & Grooving and 1 Knurling Holders

  • Variable speed goes anywhere from 100 to 1,100 RPM on the low setting and 100 to 2,500 RPM on the high setting.
  • 18-1/8 x 4-3/4 inch table travels 11-13/16 inches along the X-axis and 5-1/8 inches along the Y-axis.
  • Bevel the head and column 45 degrees in either direction for angled cuts in metal, wood, plastic and more.
  • Compact cast iron design measures in at 23-1/4 by 22 by 29-1/2 inches in size with an 8-1/2 by 15 inch foot print.
  • Includes an R8 spindle taper, a pre-installed drill chuck (1/32 to 1/2 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an....
Check Stock

Live At The BBC

  • Blue steel springs give the player quick response.
  • Both ends of the octave key axis rotate in a receptacle that is coated with teflon to insure a smooth operation every time.
  • The bell and the body of the saxophone are firm connected by a tri-point balanced bell brace.
  • Includes: Case With Wheels, Mouthpiece, Ligature and Cap, Neck strap, Cleaning cloth.
  • 1 Year Warranty Against Manufacturer's Defects.
Check Stock

Arbor Axis 40 Flagship 2019 Complete Longboard

  • Arbor Axis 40 Flagship Complete Longboard Measures 37" x 8.5".
  • Arbor Outlook Easy Rider Amber 69mm Longboard Wheels.
Check Stock