Reviews Vacuum Pressure Relief Valve

Polishing Burnishing Wheel, 1in Inner Diameter Polishing Wheel, Stainless Steel Tube for Complex Types of Polishing Removing Rust(80 mesh)

  • 【MILKING REGULATING VALVE】Pressure stabilizing valve is an accessory used in pasture milking machine, which can adjust the vacuum range of small milking machine when working, and is a very important accessory in milking equipment..
  • 【PLASTIC VACUUM MILK MACHINE】Adjust the pressure by turning the screw, easy to operate and use.Suitable for donkeys, sheep, cattle, horses, can work well in the dairy factory, cow farm, goat or sheep farm..
  • 【PRESSURE REGULATOR ACCESSORY】Vacuum Pressure Regulator, Vacuum Pressure Regulator Valve Controller Milking Machine Part Replacement for Donkeys, Sheep, Cattle, Horses..
  • 【USED FOR】This is a milking machine pressure regulating valve, which is used for adjusting vacuum range of small milking machine.Pressure Regulating Valve..
  • 【EASY TO INSTALL】The machine interface is round and smooth, easy to install with less effort.Made of high quality plastic material, which is corrosion resistant and not easy to broke..
Check Stock

Watts Brass & Tubular 374A 3/4 Boiler Relief Valve

  • 1/4" male NPT 175 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 175 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock

Gates 31844 Locking Fuel Tank Cap

  • Two-way action pressure relief/vacuum relief valve allows the fuel tank to breathe while preventing the escape of fuel fumes.
  • Seals are compounded from fuel-resistant rubber.
  • Locking Mechanism Deters Fuel Theft & Vandalism.
Check Stock

Honda Genuine 17670-TR0-A11 Fuel Filler Cap Assembly

  • Two-way action pressure relief/vacuum relief valve allows the fuel tank to breathe while preventing the escape of fuel fumes.
  • Seals are compounded from fuel-resistant rubber.
  • Locking Mechanism Deters Fuel Theft & Vandalism.
Check Stock

UPE Group New 1/4 ASME Brass Safety Relief Valve 140 PSI American Made Compressed air pop Off Valve

  • 1/4" male NPT 140 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 70 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock

PPE Race Fuel Valve for 2004.5-2010 Duramax LLY/LBZ/LMM 113073000 with PPE Viton O-Ring Upgrade for PPE Race Fuel Valve

  • The PPE Race Fuel Valve (heat treated stainless steel construction) replaces stock or a shimmed pressure relief valve..
  • This valve helps maintain fuel rail pressure during high engine load conditions by completely blocking the pressure relief port (effectively eliminating fuel return to the fuel tank). It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient PRV spring pressure..
  • Kit Includes PPE Viton O-Ring 1137073001.
Check Stock

Watts Tankless Water Heater Service Valve Kit

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check Stock

Unisex Adult Steampunk Gas Mask Costume Accessory, Gold, One Size

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check Stock

Justrite Type I Safety Can, For Oil-based Fuel Storage, Green (5 Gallon)

  • Steel laboratory safety cans offer reliable dispensing features at an economical price.
  • Fill spouts have self-close pressure relief caps and stainless steel flame arresters.
  • These cans also feature a vacuum relief valve within the lid for smooth liquid flow.
  • Self-closing faucets provide trouble-free dispensing of hazardous liquids.
  • Measures 11-3/4-inches outside diameter by 15-7/8-inches height.
Check Stock

Acecare Charging Station Also Called Filling staion for Compressed air refilling

  • CONNECT. Connect compressor with valve to fill gases to tanks or pcp air guns..
  • WITH GAUGE. It is with gauge that shows the pressure in the tank or gun that receive the gases..
  • EASY TO INSTALL. It is easy to connect the valve and compressor, just very few steps..
  • WITH PRESSURE RELIEF KNOB. It is with pressure relief knob that will relief the rest pressure in hose to keep it safe when you take off it from valve..
  • WITH HOSE. The filling staion is with hose on it, and you do not need to prepare another hose when you fill gases..
Check Stock

ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum Carburetor Intake Manifold & Vacuum Test

  • DIAGNOSE YOUR VEHICLE: The ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems.
  • Set includes a variety of adapters suitable for most vehicles.
  • Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar).
  • 4-IN-1 KIT: 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • When reading the pressure gauge, occasional needle drop indicates that the carb or tappets need an adjustment plug, missing or stuck valve, or trouble in carburetor.
  • Steady, regular drop indicates that the valve is held open, burnt, or chipped.
  • Wide pressure fluctuation at high speeds indicates a weak valve spring.
  • Steady drop to zero pressure indicates a choked muffler.
  • EASY TO USE: Assembly and operating instruction manual included.
  • Pressure gauge has a 4-inch (10.2cm) diameter with color-coded measurement scales so it is easy to read and a 1.2-inch (3cm) thickness with rubber side notches for easy grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
Check Stock

Tool Daily Thermal Release Valve for Pressure Washer Pump, 1/4 Inch NPT, 2-Pack

  • Fitting: 1/4″ NPT. The outside diameter of male thread is 0.54 inch. Include 2 pieces pressure washer release valve..
  • Compatible with many brands, such as Generac,Homelite, Karcher, Briggs, Power Stroke, Husky, Black Max, Craftsman, Him Ore and Ridged pressure washers. Replaces Homelite part numbers 678169004, 678169002 and 678169001. Replaces Briggs and Stratton parts 208673GS, 21783GS, 194298GS and B3090GS..
  • Thermal Relief Valve protects pressure washer pumps operating in a safe temperature range to prevent overheating. When water temperature reaches above 145º F, pump seals may fail. The thermal relief valve will open to release hot water and allow cold water to enter the pump. So it continues to operate at a safe temperature. If the pump have ever overheated, the thermal relief valve must be replaced..
  • Made of brass. Max. inlet pressure of pumps is 200 PSI..
  • Quick reply within 10 hours. Any issue or question, please free to contact with us..
Check Stock

N / A YSTOOL Brake and Clutch Fluid Hand Pump Vacuum Bleeder Tool Kit Brake Oil Change Power Steering Fluid Bleeding Set with Hand Pump Jar Adapters for Auto Car Truck Motorcycle Use

  • This multi-functional vacuum pump kit can be widely used to test a variety of essential vehicle settings and operations, such as Computerized Engine....
  • The included three differently sized black L type rubber connectors and two straight cone rubber connectors, can connect with the brake bleeder valve....
  • The hand pump adopts brass cylinder with a -30 to 0inHg gauge, has pressure-maintaining function and a pressure relief valve on the cylinder. The tool....
  • In the hand held vacuum pump tester set, there is a 120ml / 4.5oz storage jar, which has liquid storage cover and liquid transfer cover with 2PCS....
  • If after pumping several times and you can not pump any more, but the index keeps on certain readings without dropping, maybe it is because of a....
Check Stock