Reviews Upgrade Anet Ato Dual Extruders

TENLOG TL-D3 Pro Independent Dual Extruder 3D Printer 300 Degree High Temperature Nozzle,Silent Mainboards TMC2209 Drive,600W Power Supply,Support PVA TPU ABS PLA Nylon,11.8 x11.8 x13.8

  • INDEPENDENT DUAL EXTRUDERS: 3D printer is ideal for efficient and sturdy prints.
  • THREE MODES: Dual material, duplicate mode, and mirror mode to allow you to use extruders in tandem or independently for more efficient printing.
  • NEAR-SILENT PRINTING: A mute motherboard and direct drive extruders are designed to print near-silently for non-distracting design work.
  • EASY TO ASSEMBLE: 3D printer can be assembled in less than 5 minutes.
  • BOROSILICATE GLASS BED: Distributes heat evenly for less warping and smooth printing.
  • prints can be extracted from the bed by hand following cool down.
Check Stock

TENLOG TL-D3 Pro Independent Dual Extruder 3D Printer 300 Degree High Temperature Nozzle,Silent Mainboards TMC2208 Drive,600W Power Supply,Support PVA TPU ABS PLA,Direct Feed,11.8 x11.8 x13.8

  • INDEPENDENT DUAL EXTRUDERS: 3D printer is ideal for efficient and sturdy prints.
  • THREE MODES: Dual material, duplicate mode, and mirror mode to allow you to use extruders in tandem or independently for more efficient printing.
  • NEAR-SILENT PRINTING: A mute motherboard and direct drive extruders are designed to print near-silently for non-distracting design work.
  • EASY TO ASSEMBLE: 3D printer can be assembled in less than 5 minutes.
  • BOROSILICATE GLASS BED: Distributes heat evenly for less warping and smooth printing.
  • prints can be extracted from the bed by hand following cool down.
Check Stock

LANMU 2 in 1 Micro SD to SD/Micro SD Card Extension Cable Extender Adapter Compatible with Ender 3/Pro/3 V2 ,Ender 5/Pro/Plus, CR-10S and More 3D Printers(5.9in/15cm)

  • Upgrade 2 in 1 Design: Designed with dual card slots, can allow to insert micro sd or sd card which one you need, no hassel of changing the other extension cable..
  • Premium Materials:Micro SD to SD Card Extension Cable is made of High-quality Plastic & FFC..
  • Type: Micro SD/SD to Micro SD Card Extension Adapter.Support the card 32G,64GB,128GB and 256GB,much more convenient for your life.Never affect the read and write speed of your machine,keeping it efficient and safe..
  • Universal Compatibility:Widely compatible with GPS, DVD, DVR, LED/LCD screen,mobile phones,Raspberry Pi and reality 3D printers,such as CR-10,Ender 3 Pro, Ender 3,Ender 3 V2,Ender 5,Ender 5 Plus, Anet A8,Anet A6, MonoPrice and more..
  • Warranty:LANMU provides lifetime warranty and friendly after-sale service including 30-day unconditional money back and 180-day free replacement if receiving defective items,making sure the risk-free shopping experience for you. (Note: 1.If the micro sd end is locked, it will make a "click" sound. 2. Please do not use the sd card and micro sd card at the same time. 3. After switching the card, please reboot the device to use.).
Check Stock

3D Printer Glass Bed Upgraded, Borosilicate Glass Plate w/Corners Cut for Monoprice Maker Select V2 Anet A8/A6 Wanhao Duplicator i3 220x220x3mm with4 Glass Clips

  • 【Borosilicate Glass】 High binding power when heating. Easy to separate the plastic parts when cooling..
  • 【Size】 220mm x 220mm x 3mm.Compatble with Maker Select V2, Wanhao Duplicator, Anet A8, Anet A6 and other 3D Printers..
  • 【Safety】 Flat Polished Edge for safe to handle..
  • 【Hight quality 】Resistant to thermal shock compared to regular glass. A good build plate upgrade replacement..
  • 【Flat Enough】 Reduces warping, keep the printing surface level..
Check Stock

Glass Bed, Upgraded 3D Printer Platform Tempered Glass Plate Build Surface Cover for Anet A8 /A6/ A2/ ET4 (220x220x4mm)

  • BED MATERIAL-100% Genuine Borosilicate Glass is coated with inorganic microporous coating and has a hardness of 8 Mohs, heat resistance up to 400 ℃..
  • BUILD SURFACE TEMPERATURE SETTINGE- PLA: 50-70ºC TPU: 50-70ºC ABS: 100-125ºC (recommended 110ºC) PC: 100-130ºC (120ºC is recommended) Nylon: 90-120ºC (110ºC is recommended) PP: 100-130ºC (120ºC is recommended) PETG: 50-70ºC.
  • SIZE&COMPATIBILITY-Build Surfaces have 4 different size to choose 220x220x4mm Works for Anet A8 /A6/ A2/ ET4,235x235x4MM Works for CREALITY Ender3 300x300x4MM Works for Anet E12 E16 A8PLUS ET5 Artillery SW-X1 310x310x4MM Works for CREALITY CR10.
  • NO EDGE CURLING - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • QUANLITY ASSURANCE-All products in this shop provide free lifetime service.
Check Stock

Lenink Micro SD to SD Card Extension Cable Adapter Flexible Extender SD/RS-MMC/SDHC/MMC Memory Card Reader 32GB Compatible with GPS, Anet A8 3D Printer, Raspberry Pi, TV, DVD (18.9in/48cm)

  • Wide Compatibility: Micro SD to SD card extension cable compatible with Car DVD, car GPS navigation, DVR, LED/LCD screen, smartphone and 3D printers such as CR-10,Ender 3,Ender 5, Anet A8, Anet A6.
  • Fast Reading Speed: SD card extender can transfer data quickly to the card jack of most machines, read and write speed will not affect or lose any information.
  • High Quality: The 48 cm Micro SD to SD card adapter is made of plastic and FFC, which is not easy to break. Flexible and lightweight design is ideal for carrying, whether at home, on the go or at work.
  • Support: All need to use a memory card SD / RS-MMC / SDHC / MMC products. Support the card 32G, making navigation upgrade more convenient.
  • Easy to Use: Insert the SD card into the extension cable adapter, then insert the extension cable adapter into the machine, there will be a small "click" for good connection. 180 days super long warranty.
Check Stock

HUBBELL WIRING DEVICES HBL2721 Power Entry Plug 3P4W 30A 3PH 250V L15-30P

  • ♪ COMPATIBLE FUSE :Fits for 1A 2A 3A 4A 5A 7.5A 10A 15A 25A 30A ATC/ATO blade fuse.
  • ♪ SAFETY PROTECTION: Heavy duty 16 AWG red color wire, great look and added protection to the original circuit.
  • ♪ WATERPROOF FUSE HOLDER: Unique design of dual slot tight-fitting waterproof great damp-proof and waterproof performance, safe and reliable.
  • ♪ HIGH QUALITY:Made from high quality materials high fatigue resistance, melting resistance and excellent electrical conductivity and easy to....
  • ♪ PACKAGE INCLUDE: 2 x 16 AWG ATC/ATO Inline Fuse Holder.
Check Stock

LANMU Micro SD to Micro SD Card Extension Cable Adapter Flexible Extender Compatible with Ender 3 Pro/Ender 3/Ender 3 V2/Ender 5 Plus/Ender 5 Pro/ CR-10S Pro /Raspberry Pi(5.9in/15cm)

  • Extended function - 15cm cable length.You can extend the card slot out of computer desk or car navigation to the place which is easy to use..
  • Switch function - TF to TF cables to extend your card reader. Let Upgrade navigation map card and music more convenient. You are deserve to have!.
  • Compatibility - Work with Ender 3/Ender 3 Pro/Ender 3 V2//Ender 5 Plus/Ender 5 Pro/CR-10S Pro/ CR-6 SE/SanDisk microSDHC / SanDisk SDXC / Raspberry Pi / Arduino /Anet A8 3D/Anet ET5 / GPS / DVD / DVR / LED / LCD screen or Smartphone etc..
  • Caution - 1.When you change another TF card, please unplug the micro sd end from device at first, and then insert it into the printer slot again. Or please pay attention to restart the device once, if you do not want to remove the other end of the extension cord from the inside of the device.2.If the micro sd end is locked, it will make a "click" sound,please check it before printing..
  • Professional Service - Provided 180 days no reason to return service. This must be the one you are looking for..
Check Stock

The Right to Bear 3D Printers

  • 【QIDI Third Generation Extruder Assembly】The two newly upgraded extruders of X-PLUSⅡ are dual-gear extruders with more accurate printing, better heat dissipation, and less clogging.The ordinary extruder has already been installed on the printer, and its max printing temperature is 250 ℃. It can work well with PLA, ABS, and TPU. The high-temperature extruder has a 300 ℃ maximum printing temperature, which can print Nylon, PA12-CF, and PC..
  • 【Double Z-axis driver】 Ensures more stable and more precise printing quality when you print large model size. Higher configuration 3D printer.Large print size is 10.6x7.9x7.9 Inch..
  • 【Filament detection function& Resume Printing】X-PLUSⅡis equipped with a filament runout sensor. When printing a large model, there is no need to worry about the filament depletion. It will ring to remind users.If a power outage occurs during the printing process, the printer will automatically save the breakpoint..
  • 【Latest slicer software version 6.5.1】: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software's slicing algo....
Check Stock

LANMU 2 in 1 Micro SD to SD/Micro SD Card Extension Cable Extender Adapter Compatible with Ender 3/Pro/3 V2 ,Ender 5/Pro/Plus, CR-10S and More 3D Printers(18.9in/48cm)

  • Upgrade 2 in 1 Design: Designed with 2 card slots, can allow to insert micro sd or sd card which one you need, no hassel of changing the other extension cable..
  • Premium Materials:Micro SD to SD Card Extension Cable is made of High-quality Plastic & FFC.18.9in length design make it flexible and long enough to extend and read your SD cards..
  • Type: Micro SD/SD to Micro SD Card Extension Adapter.Support the card 32G,64GB,128GB and 256GB,easily make your navigation upgraded,much more convenient for your life.Never affect the read and write speed of your machine,keeping it efficient and safe..
  • Universal Compatibility:Widely compatible with GPS, DVD, DVR, LED/LCD screen,mobile phones,and reality 3D printers,such as CR-10,Ender 3 Pro, Ender 3,Ender 3 V2,Ender 5,Anet A8,Anet A6, MonoPrice and more..
  • Warranty:LANMU provides lifetime warranty and friendly after-sale service including 30-day unconditional money back and 180-day free replacement if receiving defective items,making sure the risk-free shopping experience for you. (Note: 1.If the micro sd end is locked, it will make a "click" sound. 2. Please do not use the sd card and micro sd card at the same time. 3. After switching the card, please reboot the device to use.).
Check Stock

Gizmo Dorks 1.75mm PVA Filament 0.5kg for 3D Printers, Natural

  • Excellent filament for 3D support material that dissolves in water.
  • PVA must be kept and stored dry when not in use.
  • Can be used in 3D printers with dual extruders to create prints with intricate supports that can be later dissolved.
  • Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer.
Check Stock

Fzone Aquarium ATO Auto Top Off Refilling System with Dual Optical Sensor for Both Reef and Fresh Tank （360P

  • install in a compact space, install in both rimed & rimless aquariums or sumps. ATO is nano at only 0.7 inches..
  • New technologies that allow the ATO to be more reliable.
  • EFTT(Extened-Filling-Time Technology), AFT(Anti-fluctuation Technology) techology, & upgraded QST 2.0 (Quick-Security Technology). EFTT can recognize your aquariums size & will dertimine how long it takes to fill to the desired level. QST alerts you in real-time when the ato is finished & prevents over filling. AFT measures the water level & ensures the ATO doesn't activate the pump unnecessarily..
  • QST 2.0 provides real-time protection against overfilling & won't allow the pump to run dry. The ATO controller will give a visual alert & stop the pump immediately when it senses a refilling time more than 6 times longer than the time calcualted by EFTT. QST will detect malfunctions of the sensor, controller or if you have a empty reservoir. Version 2.0 includes new technology making our ATO’s the most safe option..
  • All accessories included in the package.....
Check Stock

3D Printer Nozzle 0.4MM MK8 Ender 3 Nozzles 25 pcs Brass Nozzles for Makerbot CR-10,Anet A8 A6 with 5 Needles，Wrench and Metal Storage Box

  • √ Highly-integrated mother board fits for Auto Levelling Anet (ET4 PRO（Mute Upgrade） 3D Desktop Printer.
  • √ 12V power supply input receivable, with USB port.
  • √ Upgrading circuit design offers it stable performance.
  • √ Adopts for MOS with high-perforamnce as a driver.
  • √ The use of ST original power supply chip to support 12V power input to solve the Ramps voltage conversion chip heating problem..
Check Stock