Reviews Anet 3d Printer

Heyiarbeit 5M300 Rubber Timing Belt 5mm Pitch 20mm Width Arc Toothed Belt Synchronous Closed Loop Industrial Timing Belt for 3D Printers Black Tone

  • 【Package Included】: 10 Meters(32.8 Ft) 3D print belt with 20 teeth. Width:10mm timing belt(0.39’’).
  • 【Material】:Premium imported rubber material, which has fiberglass reinforced to be more durable and flexible..
  • 【Features】SeekLiny are professional in 3D printing accessories. The gear belt are produced by rigorous design and tested,which make it work smooth and stable.
  • mute designed & Wear-resistant with long work life..
  • 【Application】Make good performance for all DIY 3D printers,such as Creality CR10, Ender 3, Ender 5, Anet A8, E10, Anycubic, Anet series 3D printer, also suitable for most of industrial drive timing belts driven printers and so on..
  • 【5 Satrs Customer Services】Any problems about the 3d printer timing belt ,our professional team will help you solve it in the first time after you contact us..
Check Stock

Anet 5pcs Thermistor NTC 3950 100K ohm Thermistor for RepRap 3D Printer Heatbed or Hot End 3D Printer Kit Accessories - White 5PCS

  • Anet ​3d printer 100k thermistor 1.2m can be used on both of the heated bed and the extruder for 3d printers.
  • The thermisor is compatible with most 3D printers in the market such as ender3, ender3 pro, ender3 V2, CR-10, hictop d3 hero eAnet 3d printer tc.
  • There is a 2 pin female connector on the thermistor for 3D printer.
  • Wire length for the thermistor: 1m/47 inches..
  • Recommended parameters for the thermistor: R25℃=100K.
Check Stock

HICTOP 3D Printer Belt GT2 Belt 2mm Pitch 6mm Wide for Creality Ender 3 3 Pro Ender 5 CR-10 10S Anet A8 CNC and Other 3D Printers (5 Meter (16.5ft))

  • The HICTOP 3D printer belt is compatible for Creality Ender 3 ender 3 Pro Ender 5 CR-10 10S Anet A8 etc.3D Printers. There is no metal heads on it, you can use zip cable ties to lock it onto the printers.
Check Stock

3D Printer Wheels 3D Printer Polycarbonate Pulley Wheels 625zz Pulley Linear Bearing Compatible with Creality CR10 Ender 3 Anet A8 3D Printer Accessories 20 Pieces

  • Reliable material: made of polycarbonate, its nice wear resistance, flame retardancy and oxidation resistance can assist your 3D printer to complete....
  • Broad compatibility: it's applicable for most DIY 3D printer's V slot aluminum profile, including, but not limited for Creality, Ender 3, Anet, etc..
  • Nice expressiveness: these 3D printer wheels move smoothly, have low noise, have high printing accuracy, and can nicely increase the printing speed,....
  • Package includes: you will receive a package containing 20 pieces 3D printer polycarbonate pulleys, which are suitable for most DIY 3D printers and....
  • Wide range of uses: they are not only mainly applied for 3D printers, but also for engravers, hot wire machines, laser cutters, camera sliders, plasma....
Check Stock

BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer

  • A general add-on heated bed power expansion module for 3D printer.
  • Completely solve the hot bed power is too large and the load current issue. It can work with the Anet A8.
  • With this addon module to your 3D printer motherboard you can lead the maximum current up to 15A.
  • Under the premise of normal heat dissipation, this module can work steadily under the condition of I(Max)=15A. Don't exceed 15A during the process.).
  • If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive....
Check Stock

Glass Bed, Upgraded 3D Printer Platform Tempered Glass Plate Build Surface Cover for Anet A8 /A6/ A2/ ET4 (220x220x4mm)

  • BED MATERIAL-100% Genuine Borosilicate Glass is coated with inorganic microporous coating and has a hardness of 8 Mohs, heat resistance up to 400 ℃..
  • BUILD SURFACE TEMPERATURE SETTINGE- PLA: 50-70ºC TPU: 50-70ºC ABS: 100-125ºC (recommended 110ºC) PC: 100-130ºC (120ºC is recommended) Nylon: 90-120ºC (110ºC is recommended) PP: 100-130ºC (120ºC is recommended) PETG: 50-70ºC.
  • SIZE&COMPATIBILITY-Build Surfaces have 4 different size to choose 220x220x4mm Works for Anet A8 /A6/ A2/ ET4,235x235x4MM Works for CREALITY Ender3 300x300x4MM Works for Anet E12 E16 A8PLUS ET5 Artillery SW-X1 310x310x4MM Works for CREALITY CR10.
  • NO EDGE CURLING - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • QUANLITY ASSURANCE-All products in this shop provide free lifetime service.
Check Stock

Ewigkeit 24V 40W Heater Cartridge 620 Ceramic Hotend for 3D Printer Prusa Mendel (Pack of 5pcs)

  • 24v cartridge Heater is made of 304 stainless steel material,Diameter: 6mm.
  • Voltage: 24v, Power: 40w, Conveniently pre-wired with 1 meter long high temperature resistant wire.
  • Easy installation, wide temperature range, good stability, high reliability provide a high corrosion prevention.
  • Heating cartridges work with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer,Anet E10 etc.
  • 5pcs of 24V 40W 620 ceramic cartridge heater for 3D printer hotend.
Check Stock

Aceirmc 2pcs 5015 3D Printer DC Brushless Blower Cooling Fan for RepRap i3 CR-10 and Other Small Appliances Series Repair Replacement (12V)

  • Package Content : 2 x DC Brushless Cooling Fan (50mm x 50mm x 15mm).
  • For 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement.
  • Anet A8 A6 DC Cooling Fan Ultra-quiet Oil Bearing about 7500 RPM Turbo Fan For 3D Printer 5015 Blower.
  • Rated Voltage: DC 12V/24V, Current: 0.18A /0.17A.
Check Stock

DOBSTFY 3D Printing Build Surface 3D Printer Heat Bed Platform Sticker Sheet 8 x 8 200x200mm Square - Pack of 4

  • 【PACK of 4】This 200x200mm (8"x8") Build Surface for Anet A8 WanHao i3 Detachable 3D Printers DYI, square, fully matches heated bed on many popular....
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature....
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides....
  • 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible....
  • 【SATISFACTION GUARANTEED】We're so confident that you'll love these premium print surfaces, that we offer lifetime technical support and 24 hours....
Check Stock

3D Printer Extruder Nozzles 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm for Anet A8 Makerbot MK8 Creality CR-10 Ender 3 Ender 5 IRCHLYN 40 Pcs

  • 【Package include】: Total 40Pcs printer nozzles for 3D printer.
  • 10Pcs 0.4mm nozzles, 5 Pcs nozzles for each size 0.2mm 0.3mm 0.5mm 0.6mm 0.8mm....
  • 【Printer Nozzle Parameter】: Input diameter: 1.75mm, Nozzle precision: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm, Screw thread: M6, Easy to find....
  • 【Durable Material】: Ender 3 printer nozzles are made of premium brass material, sturdy and durable.
  • Fit to most non-abrasive materials such as....
  • 【Application】: 3D Printer Extruder Nozzles fit to replace all external M6 thread connection, like Ender 3, Ender 2 Creality CR-10, Makerbot Anet....
  • 【100% Satisfaction】: Your satisfaction is our priority. Please feel free to contact us if there is any problem after you received the Brass....
Check Stock

ExcelFu 5pcs 30MM Length Extruder 1.75MM Teflon Throat Tube and 5pcs 0.4MM Brass Extruder Nozzle and 5pcs Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer (Bonus: 2pcs hex Key Wrenches)

  • 5x 3D Printer Nozzle Throat Tube + 5x Nozzle Print Heads + 5x Heater Blocks Hotend + 2x Hex Key Wrenches(for MK8 Makerbot Reprap Prusa I3 3D Printer).
  • Nozzle Throat Tube: Material - Stainless Steel.
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer, works with Anet A8.
Check Stock

Andifany V1.7 Control Board Motherboard Mainboard for Anet A8 DIY Self Assembly 3D Desktop Printer Kit

  • Upgrading circuit design offers it stable performance..
  • Adopts for MOS with high-perforamnce as a driver, great heat dissipation effect..
Check Stock

BIQU Flexible Removable PEI Steel Sheet Heated Bed with Magnetic Sticker 220x220mm, Build Surface Platform for Anet A8 Robo R2 Anet A8 A6, Robo R2, Wanhao Duplicator6, Wanhao i3 3D Printer

  • Suitable for Anet A8 Robo R2 Anet A8 A6, Robo R2, Wanhao Duplicator6, Wanhao i3 3D Printer Original Removable PEI Steel Sheet Heated Bed..
  • Heated bed Platform: Easy to Use and Flexible, which has certain flexibility and can be bent. After cooling, the model is loose and easy to take..
  • Magnetic Sticker:The build surface has an upper magnetic build surface and a lower magnetic adhesive base. Place the 3M lower adhesive surface on a common construction board..
  • High temperature resistance: Withstand temperature above 200 ℃..
  • After-sales support: If you encounter any problems, please write us via Amazon-Email. We are happy to answer all your questions..
Check Stock