Reviews Umbrella Galvanized Roofing Nail

Metabo HPT 1-3/4 Inch Full Round Head Wire Collated Roofing Nails | 7,200 Count | 12113HPT

  • TYPE: Full Round Head Electro Galvanized Smooth Shank High Wire Collated Roofing Nails.
  • APPLICATION: Nail provides excellent holding power for installation of asphalt roofing shingles and insulation boards.
  • TREATMENT: Electro Galvanized, coats the nails with a layer of zinc, for greater rust resistance.
  • COMPATIBILITY: Compatible with the Metabo HPT NV45AB2.
Check Stock

Round Plastic Cap Nail 1 Inch Roofing Nails Galvanized Tar Paper Nails for House Wrap Fastening Foam Board Roofing Felt Insulation Film 4000

  • Sufficient Quantity: you will receive 4000 pieces of plastic cap nails, ample amount to satisfy your daily use and replacement demands, you can also share with your friend.
  • Quality Material: the nail caps are made of quality plastic, reliable and sturdy, not easy to break or deform.
  • The nails are electro galvanized treatment, not easy to rust or corrode, providing you with a long use time.
  • Size Information: the nail cap is about 29/32 inches in diameter, the hole measures approx. 3 mm/ 7/64 inches in diameter, the roofing nails are approx. 1 inches in length.
  • Please check the dimension before purchasing.
  • Creative Design: the round plastic caps adopt a flexible round head that conforms to surfaces, making it harder for water to get under the cap, the integrated design saving you time and energy, convenient for you to use.
  • Where to Apply: the tar paper nails are widely applicable, suitable for securing roofing felt, sheathing, anchoring house wrap, fastening foam board, bringing you much convenience when using.
Check Stock

Metal Roofing Screws 250 12 x 2 ZINC/NO Paint Hex ReGrip Sheet Metal Roof Screw Sharp Point Metal to Wood siding Screws.

  • #12 Sheet Metal ROOFING SCREWS.  Sharp Point ReGrip Screws. 5/16" Hex Head, ~9/16" Washer.
  • 250 COUNT Metal-to-wood roofing screws are galvanized and zinc coated to prevent rusting.
  • Hex washer head, sharp point roof screw with EPDM washer seal, seals roofing panel to screws..
  • Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
  • Galvanized Screw is Non-Painted and gets it's Color from the Galvanizing Process and is natural gray.
Check Stock

Metabo HPT 1-1/4 Inch Pneumatic Roofing Nails | 7,200 Count | 12111HPT

  • TYPE: 15 Degree Wire Weld Collation Smooth Shank Roofing Nails.
  • APPLICATION: Nail provides excellent holding power in most wood applications. Primary applications include: Framing, sheathing, sub floors and roof decking.
  • TREATMENT: Electro Galvanized, coats the nails with a layer of zinc, for greater rust resistance.
  • COMPATIBILITY: Compatible with the Metabo HPT NV45AB2.
Check Stock

CREWTOWER Roofing Nail Gun, 15 Degree 3/4-inch to 1-3/4-inch Pneumatic Roofing Nailer, Heavy Duty Coil Roofing Nailer for Asphalt Fiberglass Shingles Lath Wire Fasterening Wooden Box Assembly

  • [Professional Nail Gun]: This roofing tool is made not only to get your work done, but also as a loyal servant to your beautiful life and dreams. This roofing nail gun is the right tool to assist you achieve those goals..
  • [Easy to Use]: With easy-to-load magazine, this roofing nailer is easy to load coil roofing nails. The quick-release nosepiece makes it easy to clear jams. Simply turning a wheel, you can adjust the nailing depth, and interchangeable trigger to switch firing mode..
  • [Powerful and Efficient]: This powerful air nailer is made of industrial-grade parts, firing engine provides quick response. Comfortable rubber handle and well balanced siding nailer gun body reduces fatigue for long time jobs. Large capacity magazine improves working efficency by minimizing replenishment time..
  • [Wide Applications]: This heavy duty coil roofing nailer is ideal for fasterning asphalt and fiberglass shingle, fasterning lath wire on plywood, siding installation and wooden box assembly..
  • [Tool Specifications]: The pneumatic coil roofing nail gun weighs only 5.67lbs with aluminium body, load capacity 120 nails, drives 15 degree wire welded coil roofing nails, nail length 3/4" to 1-3/4", shank diameter 0.12", air-powered, operating pressure 70-120PSI..
Check Stock

Metal Roofing Screws 250 10 x 1 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

  • Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 1".
  • Metal Screws are painted to closely match many brands of metal roofing though color may vary.
  • Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc).
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal.
Check Stock

Freeman SNRSHDG92-2WC 15 Degree 2\ Wire Collated Galvanized Ring Shank Coil Siding Nails (3600 count)

  • Nailed It: These wire collated 2" siding nails are made of hot dipped galvanized steel to prevent rust and corrosion, and are designed for use with most 15 degree nail guns including model PCN65. Each box includes 3600 nails so you have plenty on hand..
  • Pro Design: These 2" nails are ideal for decking installation, sheathing, cement siding, fencing, plywood, OSB, and fiber concrete siding. They feature a ring shank for better grip, superior holding power, and the best withdrawal resistance available..
  • The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between..
  • Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA..
  • Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and ....
Check Stock

#8 x 1/2\ Stainless Philips Pan Head Sheetmetal Screw (1/2\ to 2\ Lengths in Listing) 100 Sheet Metal Screws (#8 x 1/2 Inch)

  • Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1".
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
  • Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing.
Check Stock

iConcern 6.5 ft. Thatched Patio Tiki Umbrella with Tilt - Tropical Palapa Raffia Tiki Hut Hawaiian Hula Beach Umbrella, Including Portable Fabric Carry Bag.

  • CREATED AND DESIGNED IN U.S.A. - Detailed research coupled with these natural color designs were created so you can stay under a palette of nature's colors at the beach..
  • PROTECTION - Made of high quality 100% polyester. Excellent UV blocking protection Sunshade umbrella, UPF 50+..
  • EASY CARRY AND STORE - Including a portable fabric carry bag for easy transporting and storage..
  • NATURAL FEELING - Straw covered umbrella top for a real Hawaiian feel insures crisp tones and colors..
  • ECO-FRIENDLY - Made from artificial thatch roofing materials making the umbrella eco-friendly. The roofing canopy material does not fade in color..
Check Stock

Metal Roofing Screws 1000 10 x 1-1/2   Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

  • #10 Sheet Metal ROOFING SCREWS.  Our metal roofing screws are galvanized for corrosion resistance..
  • 1000 COUNT Metal-to-wood roofing screws have a type 17 self-starting tip for easy installation.
  • Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
  • Hex washer head roof screw with EPDM washer seal, seals roofing panel to screws to prevent leaks..
  • The screw is Not Painted and is naturally a gray color due to the galvanizing process on the screw.
Check Stock

BHTOP CN45N Roofing Nail Gun, 15 Degree Roofing Nailer, 3/4-Inch to 1-3/4-Inch Coil Nails, Air Nailer Coil 120-pcs Load Capacity

  • Professional Roofing Nail Gun- Professional grade roofing nail gun designed with moving cylinder engine for low recoil. Compatible with 15 degree wire collated roofing nails from 3/4" to 1-3/4".
  • 120 PCs Big loading capacity- Big loading capacity (120PCS) magazine will fasten a full bundle of shingles without reloading. Nails load from the side fast and easy.
  • Special Improvement-Magnetic nail holder aligns the nails when loading and ensures jam-free firing. Tool-less depth of drive adjustment for precision nailing/flush driving.
  • Widely Used -Ideal for a range of materials and applications which will meet all your different need in nailing. Perfect for applications such as roofing, asphalt and cedar shingles, wall sheathing, wood crate assembly, flooring underlayment, siding installation, and fences..
  • Special Humanized Design-Steel contact safety with dual carbide inserts for less wear. Soft grip for comfort and control. Delivers the power to consistently drive nails in the toughest applications..
Check Stock

PeakWorks Fall Protection Safety Lifeline Rope Grab, Anchor 50' Vertical Cable, Galvanized Steel Snap Hook Harness Tools Equipment for Climbing, Rescue, Hunting, Roofing, V84084050

  • 【Durable & Anti-rust Steel.】Our Roof Shingles Remover is made of hard steel material and the 2-in-1 design is more accurate, efficient and safer for quick installing or pulling nails on your roof shingles. With the rust proof and polished coating, our roofing tools will be your practical tool for shingle repairing and replacement..
  • 【Nail-slot Design for Secure Grip.】With the unique nail groove design, you can inlay the nail and work in the narrow space smoothly. This Shingle Removal Tool will allow the roofing nails driven perpendicular to roof that bring longer lasting repairs without damaging the shingles with your hammer..
  • 【Claw Tip for Nail Puller.】Our Shingle Nail Installer can easily pull out the nail from roofing shingles. Just drive the claw tip under the nail and twist, easily pull out the nail with less efforts that will definitely safe time and money..
  • 【Easy to Use & Handy】This roof shingle nail installer is just handy to carry on with 1.1 inch in width and 11 inches in length, which make roofers work more accurate, efficient and safer. Our Roof Shingles are handy and fit for simple s....
Check Stock

#12x1-1/2' Metal to Metal Type #3 Galvanized/ZINC Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

  • #12 Metal to Metal #3 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
  • 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust resistant.
  • Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
  • #12 - 3 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
  • Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products.
Check Stock