Reviews Ultra low Offset

Picatinny Offset Rail Mounts Aluminum 45 Degree Adapter Combination for Flashlight Laser Sight Optics for Hunting (5 Slot Hollowed Out 45 Degree - 2 Pack)

  • These were easy to install. light and red dot sight fit perfect. . if you place a red dot on your 2000, use a bore sight to align the red dot up with the end of your barrel. You can easily use hard sights, then roll your 2000 just a tad to use the red dot. These offset rails were just the perfect height.
  • This product worked great for a low profile offset mount. I put it under my red dot so it would not hinder the use of the red dot or iron sights. you can mounted a small flashlight. Works as intended..
  • Super Lightweight Offset Side Rails with Great Low Profile Design! Allows the Attachment of Lasers, Flashlights, Red Dot Sights or Other Tactical Offset.
  • 45 degree offset mount can fit for 45 degree offset iron sights.
Check Stock

TaylorMade SiM UDI Iron #3, 20 Degree Loft, Graphite Shaft, Right Hand, Stiff Flex , Titanium

  • Tour Validated Shape: Tour inspired shaping with a refined leading edge, thinner topline and a moderate sole for improved turf interaction. Minimal offset preferred by better players encourages greater confidence at address and enhanced workability.
  • SpeedFoam: Ultra light urethane foam injected inside the head engineered to push the design limits of face speed while simultaneously improving feel.
  • Hollow Body Construction: Delivers clean aesthetics while also allowing for a low and forward CG placement for a powerful and penetrating ball flight.
  • Forged C300 Face With ICT: A lightweight ultra-thin face forged from C300 steel allows for a stronger face and explosive ball speeds.
  • engineered with Inverted Cone Technology for an enhanced sweet spot and to promote a straighter ball flight.
  • Thru Slot Speed Pocket: Our most flexible Speed Pocket design engineered to maximize ballspeeds and provide forgiveness on low face shots.
Check Stock

Cobra Golf 2019 F-Max Superlite 5 Hybrid Black-Red (Men's, Right Hand, Graphite, Right Flex, 25.0)

  • Lighter overall weight-19 grams of weight saving performance is achieved through a 7 gram lighter clubhead, a 7 gram lighter grip, and a 5 gram lighter shaft.
  • Forged 455 steel face INSERT-A shallow face design is forged using high strength stainless steel to create higher dynamic launch and faster ball speeds.
  • Back/heel weighting-an ultra-forgiving construction features an internal weight pad positioned low, back and heel ward that promotes higher launch and straighter ball flights.
  • Crown alignment feature-a subtle crown alignment design assists with a square setup at address and provides a visually pleasing detail with it being distracting to the Eye.
  • Offset design-an Offset hosel helps deliver a square face at impact to optimize launch and distance, while promoting straighter, more accurate ball flights.
Check Stock

Cobra Golf 2019 F-Max Superlite Fairway 3 Wood Black-Red (Mens, Left Hand, Graphite, Reg Flex, 16.0)

  • Lighter overall weight-16 grams of weight saving performance is achieved through a 4 gram lighter clubhead, a 7 gram lighter grip, and a 5 gram lighter shaft.
  • Forged 455 steel face INSERT-A shallow face design is forged using high strength stainless steel to create higher dynamic launch and faster ball speeds.
  • Back/heel weighting-an ultra-forgiving construction features an internal weight pad positioned low, back and heel ward that promotes higher launch and straighter ball flights.
  • Crown alignment feature-a subtle crown alignment design assists with a square setup at address and provides a visually pleasing detail with it being distracting to the Eye.
  • Offset design-an Offset hosel helps deliver a square face at impact to optimize launch and distance, while promoting straighter, more accurate ball flights.
Check Stock

Juried Engineering TL072CP TL072 IC JFET Operational Amplifier & 8-Pin DIP Sockets with Machined Contact Pins Breadboard-Friendly (Pack of 5)

  • The TL072 JFET-input operational amplifiers incorporate well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low-input bias and offset currents, and low offset-voltage temperature coefficient..
  • Low Power Consumption, Wide Common-Mode and Differential Voltage Ranges, Low Input Bias and Offset Currents.
  • Output Short-Circuit Protection, Low Total Harmonic Distortion: 0.003% (Typical), Low Noise Vn = 18 nV/√Hz (Typical) at f = 1 kHz.
  • High-Input Impedance: JFET Input Stage, Internal Frequency Compensation, Latch-Up-Free Operation.
  • High Slew Rate: 13 V/µs (Typical), Common-Mode Input Voltage Range Includes VCC+, Example Applications: Motor Integrated Systems: UPS, Drives and Control Solutions: AC Inverter and VF Drives, Renewables: Solar Inverters, Pro Audio Mixers, DLP Front Projection System, Oscilloscopes.
Check Stock

Sparwod Tactical 1

  • Angled Offset Mount:New gen tactical flashlight ring with 45 degree offset angle for optimal low profile center bore alignment..
  • Easy to Install:Integral max strength twist-lock offset rail mount for mounting flashlights to rail equipped rifles or shotguns..
  • Fit all 30mm Mountable accessories:Mounts to any standard weaver or picatinny rail, with the flashlight offset to the side..
  • Size Details:25.4mm (1 inch) ring diameter,mount is 1" In diameter, 1.8" In length, 1.6" In height, and 1.6 ounces in weight..
  • Durable Material:Light crafted from high quality&lightweight precision machined aluminum,with anodized black matte finish..
Check Stock

Juried Engineering TL072CP IC Dual Low-Noise JFET-Input Operational Amplifier & 8-Pin DIP Sockets with Machined Contact Pins Breadboard-Friendly (Pack of 10)

  • The TL072 JFET-input operational amplifiers incorporate well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low-input bias and offset currents, and low offset-voltage temperature coefficient..
  • Low Power Consumption, Wide Common-Mode and Differential Voltage Ranges, Low Input Bias and Offset Currents.
  • Output Short-Circuit Protection, Low Total Harmonic Distortion: 0.003% (Typical), Low Noise Vn = 18 nV/√Hz (Typical) at f = 1 kHz.
  • High-Input Impedance: JFET Input Stage, Internal Frequency Compensation, Latch-Up-Free Operation.
  • High Slew Rate: 13 V/µs (Typical), Common-Mode Input Voltage Range Includes VCC+, Example Applications: Motor Integrated Systems: UPS, Drives and Control Solutions: AC Inverter and VF Drives, Renewables: Solar Inverters, Pro Audio Mixers, DLP Front Projection System, Oscilloscopes.
Check Stock

EC Buying AD620 High Accuracy Low Power Programmable Instrumentation Amplifier Module Voltage Amplifier Module Differential Amplifier Single-Ended/Differential Small Signal/Small Amplifiers Module

  • ♥Introduction: The AD620 is a low-cost, high-accuracy instrumentation amplifier that requires only one external resistor to set the gain over a gain range of 1 to 10,000. Ideal for portable (or remote) applications. With high accuracy, low offset voltage, and low offset drift, the AD620 is ideal for precision data acquisition systems such as electronic scales and sensor interfaces. Also features low noise, low input bias current, and low power consumption. The module has a fixed voltage output..
  • ♥Basic Features: ✭Module Name AD620 Instrument Programmable Amplifier ✭Module size:50mm * 50mm ✭Module power supply: 5V-24V ✭Module input signal type: single-ended signal or differential signal ✭Module signal input and output range: the input signal range is within 100 microvolts of the power supply, and the output signal range is within the power supply ✭Module bandwidth: AD620: 120KHz (G=100), AD623: 800KHz (G=1), AD620/623 is lower than 50KHz at high gain, and higher than 1MHz at low gain.
  • ♥ Other Features: ✭Module gain: When there is no solder slip, the AD620 will zoom by 10 times by default, and the AD623 will zoom by 20 times by default. During welding slip, AD620: G=1+50K/Rg, AD623: G=1+100K/Rg ✭Maximum magnification of the module: ....
Check Stock

OZARK ARMAMENT 45 Degree Offset Iron Sights - Canted Iron Sights - Works for Right & Left Hand Offset Iron Sights - 45 Degree Backup Sights - 45 Degree Offset Sights - Fixed Iron Sights

  • ADAPTABLE, MULTIFUNCITON USE: Our angled 45 offset sights are designed to easily fit any situation and feature a dual aperture design. Easily switch between optics or iron sights without having to flip up your iron sights..
  • AMBIDEXTROUS DESIGN: Our 45 Degree Offset Iron Sights can be used by both left handed and right handed shooters. Mount the left hand offset iron sights backwards to use them left handed or mount normally to use them right handed..
  • HEAVY-DUTY METAL CONSTRUCTION: Our Fixed iron sights are constructed of metal for a lifetime of use, Tight tolerances gives our canted iron sights a secure fit to any standard Picatinny or weaver rail..
  • LOW PROFILE: Our 45 degree offset sights feature a low profile design allowing you to easily switch between your iron sights or your optics..
  • A BRAND YOU CAN TRUST: All back up iron sights including our 45 degree offset iron sight accessories are Backed by a full NO B.S. Lifetime warranty against any and all defects, full and dedicated U.S. based support team to answer any questions you have..
Check Stock

NESDR SMArTee v2 Bundle - Premium RTL-SDR w/Integrated Bias Tee, Aluminum Enclosure, 0.5PPM TCXO, SMA Input, Antenna Base & 3 Antennas. RTL2832U & R820T2-Based Software Defined Radio (SDR)

  • An ultra-low noise software defined radio, capable of receiving nearly ANY RF signal from approximately 25MHz-1700MHz. Includes SDR, high-quality antenna base, and 3 antenna masts to get you started right away without any further purchases!.
  • Unmatched price & performance–redesigned PCB reduces noise by an average of a full 3dB! Includes all the same fantastic features as the rest of the NESDR SMArt series, including an ultra-low phase noise TCXO, with a guaranteed .
  • Same form factor as the other devices in our NESDR SMArt series, which means no USB occlusion issues–run devices side-by-side without messy extension cables or adapters, even on embedded devices like the Raspberry Pi!.
  • Always-on, 4.5V bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna circuitry without messing around with drivers or software.
  • Designed and manufactured by Nooelec in North America. Impeccable quality and full 2-year warranty!.
Check Stock

Juried Engineering LM319N LM319 High Speed Dual Comparator Breadboard-Friendly (Pack of 5)

  • Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
  • Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
  • Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
  • Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
  • Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.
Check Stock

Scientific Labwares High Precision Stainless Steel Lab Tweezers with Offset Fine Tips Style 5A

  • Offset tips allow for better visibility..
  • Premium anti-magnetic stainless steel. Corrosion-resistant and autoclavable..
  • Tip Style: Offset Angle Tapered Ultra Fine Point, High Precision ..
Check Stock

FENTUK Picatinny Offset Rail Mounts, 5 Slots 45 Degree Offset Picatinny Weaver Rail Mount Aluminum Low Profile Adapter for Flashlight Laser Sight Optics (5 Slot - 2 Pack)

  • ❖【45 Degree Offset Picatinny Rail Mount】Super Lightweight Offset Side Rails with Great Low Profile Design! Allows the Attachment of Lasers, Flashlights, Red Dot Sights or Other Tactical Offset, the 45° Offset Design Creates More Mounting Versatility Eliminating Interference with Vertical Grips, Perfect for Amateurs and Professionals..
  • ❖【Fits 21mm Picatinny Weaver Rail System】The Offset Rail Base Mounted On Standard 21mm Picatinny or Weaver Style Rail Platform, Ensure Mounting Tactical Accessory Seamlessly. [☛ Note: Our Offset Rails are Real 45 Degrees Angle Instead of 30 Degrees like other products on the market.].
  • ❖【Offset 5 Slots Picatinny Rails】With 5 Slots Picatinny Rail, Allowing You Quickly Add On Any Standard Picatinny or Weaver Accessories, Such As Lasers, Flashlights, Red Dots Sight, Micro Red Dot, Microdot, Backup Sights, Scopes, Optics..
  • ❖【Solid & Durable】Precision Machining of High Grade 6061 Aluminum Alloy In Black Matte Anodizing Finish + High Tensile Steel Screws, Weight: 1.06 oz/30 g, Durable & Lightweight Construction, High Quality, Don't Worry Wobble or Shake..
  • ❖【Quick Release & Easy To Install】Simple 2 Built-in Locking Screws Design On the Side, Easy and Quick to Remove or Mount, It Can be Installed Lef....
Check Stock