Reviews Tonneau Cover For Ford Ranger

ESI Ultimate Tailgate Seal Large with Taper Seal 6ft for The Sidewalls and/or Tailgate Gap of Various Pickups

  • The Original and Patented Tailgate Seal LARGE 6ft length EPDM rubber. Keeps out dust and water when using a truck bed cap or tonneau cover. Cut to length and use small cut pieces for the sidewalls and/or the horizontal tailgate gap on various pickups. NOTE: This is not a complete seal for the sidewalls and horizontal tailgate gap.
  • purchase a 10ft length for a complete seal (ASIN: B00IPQWXZQ)..
  • Compatible with: 2020 and newer Chevrolet Silverado 1500, 2500 and 3500, 2020 and newer GMC Sierra 1500, 2500 and 3500, Silverado with Multi-Flex Tailgate, Sierra with MultiPro Tailgate, 2015 and newer Chevrolet Colorado, 2015 and newer GMC Canyon, 2019 and newer Ford Ranger, Ford Lightning, Ford F150, F250, F350 and F450, Nissan Frontier, Nissan Titan, RAM with Multifunction Tailgate, RAM with RamBox, RAM with RamBox and Multifunction Tailgate..
  • Use on the horizontal tailgate gap for 3 pickups: Nissan Titan, Ford Ranger 2019 and newer (inside the U.S. market), Ford Ranger (outside the U.S. market). NOTE: To seal just the horizontal tailgate gap for most pickups worldwide, purchase a Standard Tailgate Seal with Taper Seal 6ft length (ASIN: B019QFCZ7A). To seal both the sidewalls and the tailgate gap for most pickups worldwide, purchase a Standard Tailgate Seal wi....
Check Stock

oEdRo Truck Bed Tonneau Cover Soft Tri-fold Compatible with 2019-2022 Ford Ranger 5 Feet Bed

  • 【PREFECT FIT】 OEDRO soft trifold truck bed tonneau cover is compatible with 2019 2020 2021 2022 Ford Ranger 5 ft / 61.0 in bed..
  • 【SECURE YOUR TRUCK BED】 OEDRO’s tri-fold truck bed cover provides your pick-up the perfect combination of security, convenience and appearance. It is easy to install and the tailgate lock turns your truck bed into a completely secure trunk which is snow proof and dust-proof..
  • 【HEAVY DUTY MATERIAL】 Composed of double layer PVC, OEDRO’s truck tonneau cover has been thoroughly tested for UV protection and superior tensile properties. Pre-assembled powder coated rails and aluminum clamps are included for trouble-free installation and formidable stability..
  • 【EASY INSTALLATION】 No extra tools are required. In the majority of cases, no drilling is necessary. (Small holes need to be cut for trucks with rail cap or over-the-bedrail bed liner to secure the clamps.
  • No cut needed for pick up with under-the-bedrail bed liner). By following the included instruction manual, installation will be smooth and simple..
  • 【All Around Protection】Please measure your truck bed size or contact us before buying. With the tailgate locking, your truck bed can be instantly converted into a 100% secure snow-proof and dust-proof trunk. ....
Check Stock

ESI ROK BLOCK Tailgate Gap Cover 4.25\ width

  • The ORIGINAL Tailgate Gap Cover ROK BLOCK eliminates debris from falling into the tailgate gap area, greatly reducing clean-up time. Note: Use ROK BLOCK XL 7” width (search ASIN: B075PWVW67) for the following compatible pickups: Silverado, Sierra, Ford F150 2021 and newer with hinge retainer for power closing tailgate, Ford Ranger 2019 and newer, Nissan Frontier and all pickups / utes outside of the U.S. market..
  • When tailgate is closed ROK BLOCK doubles as a tailgate seal for the tailgate gap, preventing dust, fumes and water intrusion when using a truck cap or tonneau cover. To seal the sidewalls install patented Tailgate Seal with Taper Seal (sold separately, ASIN: B00IPQWXZQ)..
  • 3M ST1200 tape is a high-quality automotive grade tape that adheres to all surface finishes, including spray on bed liners. For drop in bed liners ROK BLOCK installs under the liner. Apply when the air and surface temperature is between 55° - 104°F (13° - 40°C)..
  • Excluded pickups, not compatible with: Honda Ridgeline with Dual Action Tailgate, RAM with Multifunction Tailgate and all pickups/utes outside the U.S. market..
Check Stock

CAPSER 5.5 FT Soft Tri-Fold Truck Bed Tonneau Cover Fits 2015-2023 Ford F150 Styleside 5'5\(66\) Truck Bed

  • 【FITMENT】This CAPSER truck bed cover Compatible with 2015 2016 2017 2018 2019 2020 2021 2022 2023 Ford F150 Styleside 5'5"(66") Truck Bed..
  • 【PREMIUM MATERIAL & MORE SECURITY】Made of reinforced, commercial grade vinyl, Our ford f150 tonneau cover is engineered to be resistant to water, snow, sunray, dirt and dust. Ultra strong safety clamps and additional easy-adjust cover buckles for more security. Protect f150 tonneau cover from sliding or blowing off while driving..
  • 【FAST & EASY INSTALL】Comes completely assembled. NO tools, NO assembly, NO drilling required! Just position the cover on the truck bed covers ford f150 5.5ft bed, simply clamp the rails on and that's it..
  • 【WHY SOFT TRI-FOLD】Combines all the best features of a standard tri-fold tonneau cover. CAPSER Tri-fold tonneau cover is always a cost-effective choice. it's the most affordable style if you don’t need a heavy-duty cover for your truck bed. it costs a little bit more than roll-up covers. This will offset due to a longer lifespan..
  • 【IMPORTANT】Please measure your truck bed size or contact us before ordering. We accept returns.
  • however customer will assume the return shipping cost if ordered wrong. Should any inquiries arise, feel free to contact us directly..
Check Stock

ESI Ultimate Tailgate Seal with Taper Seal Compatible with All Ford Model Years F150 F250 F350 F450 Ford Raptor and Ford Lightning

  • Upgraded kit uses 2 less cut pieces. The original and patented Tailgate Seal compatible with All Ford Model Years F150, F250, F350, F450, Ford Raptor and Ford Lightning. This kit uses the Large Tailgate Seal for the sidewalls versus the Standard Tailgate Seal which eliminates using 2 extra small cut pieces. To purchase the Standard Tailgate Seal kit for other pickups search ASIN: B00IPQWXZQ. MADE IN USA.
  • Keeps out dust and water that enters in through the tailgate gap and sidewalls, when using a truck bed cap or tonneau cover.
  • Automotive grade EPDM rubber with 3M ST1200 tape. Adheres to all surface finishes including spray on bed liners. Reduces tailgate vibration..
  • Packaged or online directions must be followed to properly install this product. Apply when the air and surface temperature is between 55° - 104°F (13° - 40°C). This product requires 25 lbs. of pressure to bond adhesive..
  • Not compatible with Ford Ranger (search ASIN: B07YF5BL8M). Not compatible with Ford Maverick (search ASIN: B0BWV7HJMZ)..
Check Stock

UnderCover SwingCase Truck Bed Storage Box | SC206D | Fits 2019 - 2020 Ford Ranger Drivers Side

  • Fits 2019 - 2020 Ford Ranger Drivers Side.
  • The UnderCover SwingCase maintains a 3-inch clearance from the truck bed and works with virtually all tonneau covers:....
  • This toolbox swings out nearly 180° towards you for easy access from the tailgate and swings back into a locking position....
  • The SwingCase has a key-lockable lid and can hold up to 75 lbs. of cargo. It features an organizational tray, as well as a....
Check Stock

ESI ROK Block 4.25 inch Tailgate Gap Cover and Ultimate Tailgate Seal with Taper Seal 6ft for Sidewalls

  • Both ORIGINAL ESI EPDM rubber seals eliminate dust and water from entering in through the tailgate gap and sidewalls when using a truck cap or tonneau cover. Adheres to all surfaces including spray on bed liners..
  • 4.25 inch width ROK BLOCK covers the tailgate gap and eliminates debris from falling into the gap, greatly reducing clean-up time when hauling material. Doubles as a tailgate seal for the tailgate gap. For drop in bed liners ROK BLOCK installs under the liner..
  • 6ft patented Ultimate Tailgate Seal with Taper Seal installs on the sidewalls. Packaged or online directions must be followed to properly install this product..
  • PARTS IN THIS COMBO KIT ARE NOT COMPATIBLE WITH THE FOLLOWING PICKUPS: Chevrolet Silverado, Silverado with Multi-Flex Tailgate, 2021 and newer Ford trucks with a hinge retainer bracket, Ford Lightning, Ford Maverick, Ford Ranger 2019 and newer, Ford Raptor, GMC Sierra, Sierra with MultiPro Tailgate, Nissan Frontier, Nissan Titan, RAM 2500 and 3500, RAM with RamBox, RAM with RamBox w/Multifunction Tailgate, Honda Ridgeline with Dual Action Tailgate and all pickups/utes outside the U.S. market..
  • Apply when the air and surface temperature is between 55° - 104°F (13° - 40°C). This product requires 25 lbs. of pressure to bond adhe....
Check Stock

BAK BAKFlip MX4 Hard Folding Truck Bed Tonneau Cover | 448332 | Fits 2019 - 2023 Ford Ranger 5' 1' Bed (61')

  • Fits 2019 - 2023 Ford Ranger 5' 1" Bed (61").
  • ULTIMATE SECURITY | The BAKFlip MX4 tonneau cover has durable aluminum panels that automatically latch as the cover is partially or fully closed, and is fully locked once your tailgate is closed.
  • STYLISH MATTE FINISH | Featuring matte-finished aluminum panels, protecting against marks, scratches and UV damage.
  • as well as premium upgrades to the perimeter seals and hardware.
  • 100% BED ACCESS | Operate this cover closed, folded or flipped up, all without covering the 3rd brake light. Paired with a dual action tailgate seal for tailgate operation open or closed.
  • WE’VE GOT YOUR BAK | The MX4 truck bed cover is rated up to 400 lbs of evenly distributed weight and is easy to install. This hard fold has a 5-year, hassle-free warranty, with a US-based support team.
Check Stock

UnderCover Swingcase Truck Bed Storage Box | SC206P | Fits 2019 - 2023 Ford Ranger Passenger Side

  • Fits 2019 - 2021 Ford Ranger Passenger Side.
  • The UnderCover SwingCase maintains a 3-inch clearance from the truck bed and works with virtually all tonneau covers: soft, hard, folding, and rolling.
  • This toolbox swings out nearly 180° towards you for easy access from the tailgate and swings back into a locking position over the wheel well for maximum bed access.
  • The SwingCase has a key-lockable lid and can hold up to 75 lbs. of cargo. It features an organizational tray, as well as a moisture seal to help keep contents dry and protected against the elements.
Check Stock

SHARCAR USA Hard Tri-Fold Truck Bed Tonneau Cover | Fits 2019-2023 Ford Ranger 5' Bed,Black

  • Compatibility | the hard fold cover fits 2019-2023 Ford Ranger with 5' Bed (Not for models with Factory Utility Track Sys. & Cargo Bar Sys.) Noted:This cover place on the top of truck bed rails, and the first panel near cab can't stand up..
  • Sturdy Hardware | SHARCAR USA hard tonneau cover uses fiberglass reinforced plastic and aircraft-grade vinyl hardware to act as a strong protector of the truck bed and tailgate.
  • Multi-function | the hard folding cover provides a solid storage space for your cargo.
  • the anti-moisture, anti-impact, scratch resistant features allow the product to have resistance against weather exposure, chemicals and corrosion.
  • Easy Damage-free installation | the USA patented design is engineered for super easy installation. Thanks to the new style clamps, there is no need to drill holes.
  • Warranty | 3 year warranty against defects in hardware, materials and workmanship under its intended use (conditions apply).
Check Stock

TOPCOVER Hard Quad Fold Truck Bed Tonneau Cover Fits for Ford for F150 2004-2023 Styleside 5'5\FT Bed, Black Pickup Truck Bed Cover

  • PERFECT FITMENT - TOPCOVER Hard Quad Fold tonneau cover fits for Ford F150 2004-2023 only Styleside 5'5"FT bed, for Ford F150 accessories..
  • DURABLE TONNEAU COVER - This Hard Quad Fold bed cover made of heavy-duty FRP and PP honeycomb core. Full range of accessories and high quality aluminum frame ensure stability and unshakeability..
  • EASY INSTALLATION - You can complete all the installation work in 10 minutes without drilling and extra tools in most cases. NOTE - Small holes will need to be cut for vehicle equipped with over-the-bedrail bedliner to secure the clamps.
  • works with under-the-bedrail bedliner without modification..
  • SIMPLE OPERATIONS - TOPCOVER truck bed cover easy assembled and disassembled, when you need to take or place something, just folding the tonneau cover to a position close to the cab and secure with fastening buckles..
  • GOOD SECURITY - Weather-tight and good value seal create an enclosed space prevent your cargo and truck bed from extreme sun rays.TOPCOVER Hard Quad Fold tonneau cover can overcome rain, snow,strong sandstorms and hailstorms. Locking the tailgate and enjoy your trips!.
Check Stock

MOSTPLUS Retractable Hard Truck Bed Roll-Up Tonneau Cover Aluminum Low Pro Compatible with 2019-2022 Ford Ranger 5.1 Feet Bed, 61 inch

  • [Application]-----Compatible with 2019-2022 Ford Ranger 5.1 Feet Bed, 61 inch.
  • [Easy Installation]-----No Drilling and Further modification. Just clamp the rails and fix the cover. Includes Retractable Tonneau Cover, Side Rails, Secure Clamps.Additional weather stripping and Installation manual included..
  • [High Performance]-----Waterproof and UV resistant.It could protect your cargo even in the extreme weather with good sealing ability. The low profile design takes your truck a unique look..
  • [Convenient Usage]-----This cover is easy to operate by the rolling design.You could close or open it only by one-hand,provide more convenient when loading and unloading goods.It also could be washed with soap and water..
  • [Warm Tips] --- Please measure your truck bed length and make sure you have the correct model before ordering. This Retractable Hard bed cover is for 5.5 Feet Bed, 66 inch!.
Check Stock

UnderCover Ultra Flex Hard Folding Truck Bed Tonneau Cover | UX22022 | Fits 2019 - 2020 Ford Ranger 5' 1\ Bed (61\)

  • Fits 2019 - 2020 Ford Ranger 5' 1" Bed (61").
  • STYLISH MATTE FINISH | The Ultra Flex’s durable aluminum panels come with a matte-black finish. The cover itself lies flush mount, enabling you to improve the appearance of your truck.
  • PREMIUM COMPONENTS | This tonneau comes with carpeted under-paneling for added cargo protection inside the bed. The Ultra Flex also features an integrated LED bed rail light for added visibility, & full perimeter seals to help prevent water intrusion.
  • 100% BED ACCESS | The Ultra Flex allows you to drive with the cover in three secure positions: closed, partially closed, & fully opened. The cover folds into an upright position with dual prop rods, without resting on the back of the cab.
  • PURCHASE WITH CONFIDENCE | The UnderCover Ultra Flex hard fold is lightweight and easy to install. It comes with a 5-year, hassle-free guarantee, is proudly made in the USA with globally sourced materials, & is backed by a US-based customer support team.
Check Stock