Reviews Titan Backhoe Bucket

Backhoe Thumb Excavator Bolt On Universal Claw Tractor Attachment Kubota Deere

  • Fits backhoes with up to 3.25" boom width - Kubota BH75, BX25, BX24, BX23, BX22, BT601, BT751, Woods BH6000 Groundbreaker Backhoe, Titan Fronthoe, Mahindra 1710 Backhoe.
  • Specifications - Material: 0.4" steel body, and 1" steel support - Opening width: 3.25" - Jaw length: 16.5" - Finish: Powder Coated - Weight: 42 lbs.
  • Heavy Duty - Thick extra heavy duty steel, precise cut for tight tolerances. Built to strict quality control standards..
  • Please measure your bucket before ordering - 5 possible positions - Fits backhoes with up to 3.25" boom width.
  • Please feel free to tell us what we can do for you,we will reply in one business day..
Check Stock

Titan Attachments 24in Wide Backhoe Bucket, 4-Carbon Steel Teeth, Hydraulic Tilt Backhoe & Excavator Attachment

  • DESIGNED FOR THE TITAN BHBUCKET10, BHBUCKET12, BHBUCKET14, BHBUCKET16: This 3Piece Replacement Tooth Kit is a direct replacement for Titan Attachments 10, 12, 14, and 16inch Backhoe Buckets that will fit a Fronthoe and LW Series Backhoe. Titan recommends checking your buckets hole spacing before purchase. The mounting bolt spacing is 2inches..
  • REPLACEABLE TEETH: With just a little help from your toolbox, remove old or broken teeth and replace them with new ones..
  • FORGED CARBON STEEL: The teeth are forged from extradurable carbon steel and powdercoated black for a longerlasting finish..
  • DIMENSIONS: The replacement teeth are 7.48inches long, 1.7inches wide, and 1.4inches thick. Each tooth has two holes to fit a M12x55 mounting bolt with 2inch spacing..
Check Stock

G109456 G105550 1543253C1 Replacement Hydraulic Cylinder Seal Kit Loader Bucket Tilt Cylinder Rebuild Seal Kit for Case Backhoe Loader 350 580B 580C 580F 680C(Rod: 1.5\; Bore: 2.5\)

  • 【Application】For Case Crawler Tractor-Loader:350 Crawler Tractor-Loader w/BH Models 26, 26B, 26C, 26S (Loader Grapple, Loader Hydra-Leveling, Loader Tilt).
  • Loader/Backhoe:580B Loader/Backhoe w/BH Model 35 (Loader Tilt, Logging Fork Grapple),580C Construction King Loader/Backhoe (Loader Bucket Tilt LH, Loader Bucket Tilt RH, Loader Grapple),580F Loader/Backhoe (Loader Tilt),680C Loader/Backhoe (3 PT Hitch Pitch, 3 PT Hitch Tilt).
  • For Unimog: MB4/94 Unimog w/BH Model 26C, P80 Cable Plow, T70 (Cable Plow Shift).
  • 【Replacement】 New aftermarket replacement cylinder seal Kit replace part number G109456 G105550.Fits: Rod: 1.50.
Check Stock

Titan Attachments 7 FT, 3 Point Backhoe Excavator with Hydraulic Thumb

  • DESIGNED FOR BK215: The 12inch Ditch Bucket for 3 Point Backhoe is a direct replacement for the BK215 3 Point Hitch Backhoe. Use this Vshaped bucket to create wide trenches with a narrow bottom..
  • VSHAPED DITCH BUCKET: Uniquely designed with a Vshape for trenching or ditching that creates a narrow bottom and wide side trench with a secure sideslope angle..
  • DURABLE CONSTRUCTION: Designed from highquality, heavyduty material and powdercoated black for a longerlasting finish..
  • DIMENSIONS: The 74pound bucket has a top width of 18.5inches and a base width of 7.5inches to create narrow paths..
Check Stock

Powerblanket Cure PRO 3' x 4' Heated Concrete Curing Blanket - Rugged Industrial Pro Model

  • Fit **Please measure your bucket before ordering to ensure a proper match. A mismatched thumb will result in damage to your backhoe, as larger backhoes have more bucket force. For example: if you mount a 25” thumb on a hoe that requires a 31” one, you will probably bend or break your equipment. Make sure that this thumb is at least the length of your bucket when measured from boom to the teeth or the warranty may voided if damage occurs.**.
  • Easy to assemble and weld Please measure your bucket before ordering Plasma cut for tight tolerances High quality steel Adjustable teeth bars Easily removable.
  • Condition: Brand new, Color: Black, Material: Steel, 5/8" tine plates, and 3/8" body assembly plates , Tine length: 32".
  • The 36" weld on backhoe thumb from us is perfect for anyone that needs to add a high quality thumb to their excavator. Simply weld it to the boom and its ready for work. When not in use, you can just remove the teeth bars and store them away. Made from heavy duty 5/8" thick steel plates, this pro-duty implement is ready for just about any job..
Check Stock

G109504 1543294C1 Replacement Hydraulic Cylinder Seal Kit Cylinder Gland and Piston Rebuild Seal Kit for Case Backhoe/Crawler/Dozer Loader Bucket 480D 580D 580SE 850D, 850E (Rod: 2.5\; Bore: 3.5\)

  • 【Application】For Case Backhoe Loaders Bucket: 480D, 480D LL, 580D, 580 Super D, 580 Super E and Crawler / Dozers Backhoe Bucket: 850C, 855C with Backhoe Models 35A, 35C, 35C WL, 35 WL, 850D with Backhoe Models 35C, 35C, WL, W14, W14L, W14H.
  • Also for Case-IH Dozer Lift Models: 650, W30.
  • Stabilizer Backhoe Models: 850D, 850E, 855D, 855E, 850C, 855C, 580D, 580, 580G, 450B, 450C, 455B, 455C, 580C, 580B, 850, 450.
  • 【Replacement】 New aftermarket replacement cylinder seal Kit replace part number :G109504, G109424. Fits: Rod: 2.50.
Check Stock

G109456 & G109417 & G109423 & G109452 & G109460 & G109504 Whole Machine Hydraulic Cylinder Seal Kit for Case 580SE, 580 Super E Hydraulic Cylinders

  • 【WIDE COMPATIBLY】: Includes all standard equipment cylinder seal kits fits for 580SE /580 Super E. Perfect matches OEM Kit, all parts and seals are included. This Is An Aftermarket Part Made To Replace Its OEM Counterpart..
  • 【EXCELLENT FUNCTION】: This high-quality seal kit allows to fast repair the cylinder from leaking, benefit to rebuilds the standard Hydraulic Cylinder. These seals never wear out and can be resealed without any issues..
  • 【SUPERIOR MATERIAL】: Made of durable environmental plastic & natural rubber with resists Oxidation, wear, tear, UV Rays and Solvents for a long service life. All of the components of this kit meet or exceed OEM specifications..
  • 【PACKAGE INCLUDED】: 2 - Loader Bucket Tilt # G109456.
  • 5 - Backhoe Swing, Stabilizer, Stick # G109423.
  • 【SATISFACTION GUARANTEE】: We aim to give our customers the best products and services. If you're not 100% satisfied with this Hydraulic Cylinder Seal Kit, simply return it for a full refund in 30 days. Support 12 months’ warranty..
Check Stock

Titan Attachments Backhoe with Thumb Excavator 7-Foot 3-Point Attachment

  • Fits Category 1 tractors Runs on a standard 3 point linkage for Cat 1 Cat 2 customers contact us for more information.
  • Works with your tractor's hydraulic system or a standard PTO pump (not included). An external PTO pump can power this backhoe if your tractor does not have hydraulics. Hydraulic thumb included.
  • If hooking up through your tractors hydraulics, bypassing the Backhoe's oil reservoir with the specialized bypass hose kit will be necessary. Weight: 1096 lbs Bucket size: 16".
  • Max digging depth: 84" Max digging height: 110" Max digging radius: 112" Load over height: 62" Ground clearance: 11" Width at stabilizing legs: 71" Bucket rotation: 160 degrees Suggested engine hp: 3570 Connectors included: 1/4" & 3/4".
  • We need your phone number! For the trucking company to schedule delivery. Without it there will be delays..
Check Stock

LEGO City 60098 Heavy-haul Train

  • Includes 5 minifigures with assorted accessories: a train driver, engineer, welder, crane driver and a backhoe driver.
  • Heavy-Haul Train Features a motorized diesel-style locomotive with 8-channel, 7-speed infrared remote control, hopper wagon, 2 flatbed wagons, helicopter, backhoe and a crane.
  • Crane features a turning superstructure, sliding tracks, working winch with interchangeable hook and bucket, ladder and a large cab.
  • Heavy-Haul Train in total measures over 3 inches (9cm) high, 32 inches (82cm) long and 1 inch (5cm) wide.
Check Stock

Direct replacement for Kubota Backhoe BT1200 Quick Attach Bucket Ears Attachment BT4581 BT4582 BT4583 by Pocono Metal Craft

  • COMPATIBILITY: Works with the Titan Attachments LW6A and LW7A models of LW backhoes.
  • USAGE: Bypass your oil tank to connect your Titan backhoe to your tractors hydraulic control valve system.
  • QUALITY DESIGN: Customdesigned for our equipment.
  • DURABILITY: Heavyduty rubber case with protective wire to help prevent pinching.
Check Stock

Kit King - Case 1543262C1 / Case G105549 / Case G109460 Aftermarket Hydraulic Cylinder Seal Kit, 350 450 480C 580 Super K 680K 850B 855C 1150B 1155D W11 W14 Lift Stabilizer Bucket Tilt Angle

  • Case 1543262C1 / Case G105549 / Case G109460 Aftermarket Hydraulic Cylinder Seal Kit by Kit King.
  • Equipment Type: Backhoe Loaders, Crawler Dozer Loaders, Wheel Loaders, Unimog & More. Cylinder Function: Backhoe Bucket, Backhoe Stabilizer, Dozer Angle, Loader Clam, Loader Lift, Loader Tilt, Side Shift Stabilizer & More.
  • Case Models: 350, 350B, 450, 480C, 480D, 480D LL, 480F, 480F LL, 580 Super E, 580 Super K, 580C, 580D, 580 Super D, 580K, 680K, 680L, 850B, 850C, 855C, 1150B, 1150C, 1150D, 1150E, 1155D, 1155E, W11, W11B, W14, W14FL, W14L, W14H, MB4/94 - - - Fits Backhoe Models 26, 26B, 26S, 26C, 26D, 32, 33, 35, 35A, 35WL, 35C, 35C WL & More.
  • Compatible Cylinders: G101184, G101190, G101191, G101220 & More.
Check Stock

Portable Backhoe Plans DIY Track Hoe Excavator Garden Digger Build Your Own

  • High Quality Steel: The base is a solid piece that is formed so it is stronger and with this design the stress is on the base with the solid  one piece base there is no chance of smashing in your hoe's arm.
  • Powder Coated Surface: Adjusting powder coated surface, our backhoe excavator thumb are able to resist corrosion. Made for longivity, this pro-duty implement is ready for just about any job.
  • 1/2 Inch Thick: Made from heavy duty 1/2" thick steel plates, make sure that this thumb is at least the length of your bucket when measured from boom to the teeth.
  • Bolt-on Design: This backhoe excavator thumb is easy to assemble and weld, each part is plasma cut for tight fit and easy assembly.
  • Easy to Adjust and Fold Away: This easy to assemble DIY backhoe thumb is perfect for anyone that needs a high quality thumb and knows how to weld, simply folds out of the way when not in use.
Check Stock

Mophorn 24 inch Hydraulic Backhoe Excavator Thumb Attachments Weld On 1/2in Teeth Thick Steel Plate Assembly 12MM Bolt-On Design with Hydraulic Cylinder

  • With Hydraulic Cylinder: The hydraulic cylinder can work with a hydraulic pump to achieve length adjustment. The three mounting holes with different positions also enable you to adjust the angle according to your needs..
  • Item Specifications: The tooth plate of this backhoe thumb is 24 inches long, 6 inches wide, and 1/2 inch thick. The weld plate is 19 inches long.
  • please measure your bucket before ordering to ensure a proper match..
  • Heavy-duty Steel Structure: Our backhoe thumb is made of heavy-duty thick steel and designed with a triangle structure. Thus, it has acquired excellent durability and stability. The surface is also powder-coated to resist corrosion..
  • Bolt-on Design: The simple-and-convenient bolt-on design allows for easy removal when not in use. All necessary fittings are provided to make sure you can assemble and weld the high-quality backhoe thumb without trouble..
  • Wide Application: Many people around the world have widely used our backhoe thumb. It is considered a perfect attachment tool for tractors, excavators, and other equipment to help you pick up objects more easily..
Check Stock