Reviews Thumb Screw Washers- BestItemr.com

Carbon Steel Threaded Knurled Thumbscrew Screw on Knobs Grips Black Round Clamping Screw Black 20 Pieces,M4 x 10 mm

Ample quantity: you will receive 20 pieces M4 x 10 mm threaded knurled thumbscrews, which can be installed in any place you need, and meet your daily use and replacement.
Quality material: the male thread knurled clamping knobs are made of quality carbon steel, with good hardness, strength, corrosion resistance and wear resistance.
It is a fastening accessory that can be applied for a long time and could be reusable for most different purposes.
Nice craftsmanship: the surface of the grip thumb screw on type round head is smooth, the thread is neat and uniform, without burrs, making the installation effect more tight.
Easy to install: the grip knob thumb screw adopts a screw-in design, which is easy to install.
The surface is smooth and clean, making you feel more comfortable to hold and store.
Warm notice: it is recommended that you need washers as gaskets when installing some monitors to prevent affect to the computer monitor.
The length of the screw part is 10 mm, which may bottom out on some computer monitors.
You just need a layer of buffer to prevent direct contact in some cases.

➤Material: High Quality brass and steel, which have superior rust resistance and the excellent of oxidation resistance, which can ensure long time using..
➤ Size : Total 8 different computer pc screws, different screw can meet your different needs..
➤ Personal Computer Screw Standoffs Set Kit for installing or repairing an internal CPU disk, motherboard, radiator, cooling fan, power tower, graphic card, hard drive, case, monitor, flat panel screen, or CD-ROM..
➤Package includes: PC case screws, power supply, motherboard screws, hard drive screws, fan screws, brass bracket mounting screws and insulating washers.
➤5pcs high quality #6-32x6mm Desktop Computer PC Case Chassis Thumb Screws M3.5 Tool-Less Adjustment.

CORROSION-RESISTANT FINISH: The washers’ zinc plating offers protection against rust and corrosion for durability.
INCREASES FASTENER SECURITY: Flat washers are used to increase the pressure a bolt or screw provides in material.
DURABLE STEEL: The washers’ durable steel material compliments the zinc finish to increase product-longevity.
PART OF A COMPLETE FASTENING SOLUTION: Prevents a nut, bolt, or screw of the same finish and size from pulling through material.
SPECIFICATIONS: Flat Washers, 1/2" Diameter, 9/16” Drive Size, 50 washers per pack.

Material:Made of high quality 304 Stainless Steel,corrosion resistant, sturdy and durable..
Shiny washer that allows the screw to recess into the center giving a clean,decorative presentation..
Finish washers are designed to accommodate the heads of a countersunk screw in order to provide a finished appearance..
Washers are great to have around for use in wood and wet environments.Washers are usually used where larger outside diameters are required to increase the bearing surface and reduce the surface load..
Package included:100pcs #8 Countersunk Washers.The washer is designed for flat head or oval head screws..

Package includes:200pcs Screw Cup Washers, 70pcs No.6 hole diameter 4mm, external diameter 11mm 50pcs No.8 hole diameter 5mm, external diameter 13mm 40pcs No.10 hole diameter 6mm, external diameter 15mm 40pcs No.12 hole diameter 6.5mm, external diameter 17mm.
For use with countersunk wood screws and self tapping screws..
All of Washers Will Be Packed in A Sturdy Transparent Plastic Case, Easy to Store and Carry.
Made of 304 Stainless Steel, corrosion resistance,Wide range of applications.
Prevents a nut, bolt or screw from pulling through the material, finish washers are designed to accommodate the heads of a countersuck screw..

Phillips truss-head screws with self-guiding Pilot Point design..
High-grade carbon steel construction prevents stripping..
Corrosion and rust-resistant black zinc chromate plating..
Pre-installed nylon washers to avoid scratching equipment..
10-32 threaded, 3/4" long.DescriptionProduct Details The AC Infinity rack screw set is designed for installing various rack mount devices such as shelves, cable managers, network and AV equipment. The screws are constructed of high-grade strengthened carbon steel which prevents stripping. With a zinc chromate plating, they are more corrosion and rust resistant than black oxide coatings. Pre-installed nylon washers on each screw averts scratching equipment. Each set includes 50 pieces of 10-32 screws and washers.

The countersunk head screw gasket is made of pure copper, which is not easy to rot, moisture, and oxidation..
These screw washers are small in size, light in weight and easy to install and use..
This screw washer is precisely matched, and the bearing exterior of the bolt is large, and the lock is firmer..
These screw washers have standard concentricity, smoothly exterior, concentric..
Can be installed on many different types of materials. Wide range of applications..

Double ended screw with machine screw threads on one end and wood screw threads on the other end.
Commonly used to secure swag hooks into walls or ceilings.
Nuts and washers not included, ensure washers and nuts are same diameter.
Specification(s) Met: ASME B1.1 and ASME B18.2.1.

Double ended screw with machine screw threads on one end and wood screw threads on the other end.
Commonly used to secure swag hooks into walls or ceilings.
Nuts and washers not included, ensure washers and nuts are same diameter.
Specification(s) Met: ASME B1.1 and ASME B18.2.1.

Package Content: 50pcs x Finishing Cup Washers.
Finish Washers are designed to accommodate the heads of a countersunk screw in order to provide a finished appearance.
Countersunk washer can prevent a nut, bolt or screw from pulling through the material. Commonly used in automotive, pipe, and other electrical applicance.
Material: These finish washers are 100% Stainless Steel, corrosion resistant and rust resistant, can be used for a long time.
Risk Free Shopping: TOUHIA offer a 100% Money Back Guarantee for every customer. If you are not fully satisfied, please contact us and ask for a refund or replacement.

Double ended screw with machine screw threads on one end and wood screw threads on the other end.
Commonly used to secure swag hooks into walls or ceilings.
Nuts and washers not included, ensure washers and nuts are same diameter.
Specification(s) Met: ASME B1.1 and ASME B18.2.1.