Reviews Threaded Screw Anchor

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

BoltHold - SP12-38 Zinc Plated Steel Asphalt Anchor (5/8\ x 12\) - with 1\ Hex Bolt & Washer - Chemical Anchors - for Installation of Sheds, Carports, Bike Racks, & More - 2000 lb Pull Rated - 6 PK

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Better Boat 4 Foot 1/4\ Stainless Steel Anchor Chain and Double Shackle Link Ends Marine Grade

  • ...UM STAINLESS STEEL: Our Marine Grade 4 ft stainless anchor line is made from 1/4" 316 Stainless Steel along with 2 bow shackles also constructed from 316 stainless steel. Unlike the galvanized chain alternatives, these boat anchor chain options are designed to last and avoid corrosion..
  • SAFE AND RELIABLE: Our double threaded bow shackle pins prevent the screw from coming loose and falling from the anchor chain. The chain is abrasion resistant and weighted to properly keep your anchor shank parallel with the sea floor. The chain offers a 5110lbs break load while the shackles offer a break load of 5510 lbs..
  • COMPATIBILITY AND FLEXIBILITY: Our large 5/16" stainless bow shackles are designed to work with almost all anchor rope. Works great with our separately sold anchor lines and their pre spliced stainless thimble. The screw pin anchor shackles with chain will work with traditional fluke anchors, box anchor, spade anchor and others..
  • EASY SEAMLESS UPGRADE: Whether your upgrading your boat anchors and looking for a more reliable anchor chain, or outfitting a new boat, this is your solution. Not all chains are created equally, and we completely stand behind our stainless chains to provide superior performance. This allows you to worry about the anchor less,....
Check Stock

1SHOT Steel Stud Anchor 250 Pack

  • Thread Dia.: M12, Pitch:1.75mm, Total Length: 250mm / 9.84"..
  • Material: 304 Stainless steel, anti-rust, anti-corrosion, durable to use..
  • Advantage: Designed for assembly fastening, screw into threaded nuts or tapped holes..
  • Application: Suitable for anchor bolts, clamps, hangers and U-bolts and many more projects..
  • Package: Includes 2 pack M12 x 250mm Fully Threaded Rod. Any questions feel free to contact us..
Check Stock

KURUI #8 Self Drilling Drywall Anchors 100PCs Wall Anchors and Screws for Drywall 50 Self-Tapping/Threaded Plastic Sheetrock Anchors + 50#8 x 1-1/4 Screws 50-75LB Hanging and Mounting

  • PREMIUM NYLON MATERIALS PLUS GLASS FIBER – Made of high-quality hard nylon plastic mixed with highly robust glass fibers, these threaded self-tapping wall anchors are super hard, durable, anti-aging and wear resistant. They can hold objects with maximum weight of 50lbs and provide strong and sturdy grip into the wall. 50 premium galvanized Phillips screws ensures reliable installation and mounting..
  • PRACTICAL DESIGN FOR STABLE INSTALLATION - The threads cut deep into the material, providing a secure hold and pull-out resistant grip of the wall anchor and screw kit. The large threads are intended to hold firmly in drywall and can hold up to 50 pounds of objects..
  • EASY INSTALLATION WITH SCREWDRIVER – These threaded drywall anchors feature sharp, pointed shanks that can be screwed into the wall without a pre-drilled hole by using a screwdriver or a screw gun, which produces less dust. Once the anchor is in the wall, the screw is inserted, the anchor will wedge tightly against the drywall..
  • HEAVY DUTY & WIDE APPLICATION – The self-drilling drywall anchors are recommended for medium-duty applications and are very easy to install. They are perfect for hanging bathroom and kitchen accessories, shelving, light fixtures, mirrors, picture frames, curtai....
Check Stock

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock

Kadogohno Dermal Jewelry Dermal Piercing Jewelry Dermal Tops 14g Dermal Anchor Surface Piercing Jewelry Grade 23 Titanium Microdermals Base for Women Men Internally Threaded 3mm 32PCS

  • TOP MATERIAL--Post Base Made of High Quality Medical Grade 23 Titanium, Anchor Made of High Quality Surgical Steel, Safe Material, Hypoallergenic and Nickel Free, Harmless Your Skin, It's a Healthy Choice for You..
  • VALUE PACK--One Order Includes 8PCS G23 Titanium Post Base and 24PCS Surgical Steel Anchor Top..
  • Color: Silver-tone. Internally Threaded Design, Easy to Screw on and off..
  • JEWELRY TYPE: Internally Threaded Jewellery, Surface Jewellery, Threaded / Push Fit Accessories. Suitable for Necks ,Backs, Cheek, Chest, piercing or Any Body Part..
  • AFTER SALE SERVICE--All Items are New and Unused. Guaranteed Satisfaction As We Offer 90 Day Money Back Guarantee. Packs Each Jewelry With a Velvet Gift Bag. Best Fits for Women, Girls and Men..
Check Stock

3/8\ x 2 1/2\ Lag Screw Expansion Shield Long Zinc Alloy Pk 300

  • Expansion shield anchor works with a lag screw to provide a secure hold in most materials including solid masonry, masonry joints, and uncracked concrete.
  • Anchor has an internally threaded body made of zamac alloy.
  • Meets Fed. Spec. GSA FFS-325C Group 2, Type 1, Class 2C specifications.
  • Ultimate tensile strength 420 lb. in 2,000-psi concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

KURUI #8 Zinc Self-Drilling Drywall Anchors, 60PCs Hollow Metal Wall Anchors and Screws Kit, 30 Heavy Duty Anchors + 30#8 x 1-1/4'' Screws, 50-75LB Hanging and Mounting

  • RACTICAL DESIGN FOR STABLE INSTALLATION - The threads cut deep into the material, providing a secure hold and pull-out resistant grip of the wall anchor and screw kit. The large threads are intended to hold firmly in drywall and can hold up to 50 pounds of objects..
  • EASY INSTALLATION WITH SCREWDRIVER – These threaded zinc drywall anchors feature sharp, pointed shanks that can be screwed into the wall without a pre-drilled hole by using a screwdriver or a screw gun, which produces less dust. Once the anchor is in the wall, the screw is inserted, the anchor will wedge tightly against the drywall..
  • HEAVY DUTY & WIDE APPLICATION – The zinc self-drilling drywall anchors are recommended for medium-duty applications and are very easy to install. They are perfect for hanging bathroom and kitchen accessories, shelving, light fixtures, mirrors, picture frames, curtain rods and small decorative shelves, and more..
  • WORRY-FREE SHOPPING – Please check the package content as you received the product. we focus on product quality and value the shopping experience of our customers highly. Every product purchased from us comes with a 24/7 friendly customer service. Whenever you have a question, please feel free to contact us!.
Check Stock

Awclub Fully Threaded Rod, M6-1.0 Thread Pitch, 30mm Length 304 Stainless Steel Thread Bar Studs Rods, Right-Hand Threads 20pcs

  • Material: Made of high quality 304 stainless steel, excellent corrosion resistance and rust resistance.
  • All thread: Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • Applications: Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..
  • What you get - 20Pcs x Stainless Steel Threaded Rod. If you have any question about this product, please feel free to contact us !.
Check Stock

10Pcs M8 x 250mm 304 Stainless Steel Fully Threaded Rods, Threaded Rods Bar Studs, Right Hand Thread Long Threaded Screw, M8-1.25 Thread Pitch, Fits for Anchor Bolts, Hangers, U-Bolts (5/16\ x 10\)

  • 【Quality Material】These m8 threaded rod made of 304 stainless steel, which provides excellent corrosion resistance and anti-rust ability for long service life.
  • 【Package Content】You will get valued 10 pack of 8mm x 250mm threaded rods.
  • The fully threaded rods & studs can be drilled, cut, heated and shaped.
  • 【All Threaded Rods】Our stainless steel thread rod can be used for assembly fastening, screw into threaded nuts or tapped holes, cut to your desired length.
  • 【Wide Application】These 5/16 x 10 inches threaded rods are suitable for a wide variety of applications, such as anchor bolt, clamps, hangers, U-bolts, weld projections, even model building and more projects.
Check Stock

Masmoc 10Pack M8 x 80mm Fully Threaded Rod Stud 304 Stainless Steel Threaded Screw Right Hand Threads M8-1.25 Thread Pitch with 20PCS Hex Nuts and 20pcs Washers

  • Package :M8 x 80mm right hand full threaded rod 10PCS, M8 hex nuts 20PCS, M8 washer 20PCS..
  • Thread rod Dia.: M8, Thread Pitch: 1.25mm,total length: 80mm made of 304 stainless steel, provides great corrosion resistance and anti-rust ability for long service life, thread direction: right-hand thread..
  • These threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • These threaded studs can be drilled, cut, heated and shaped and widely applied in many occasions: anchor bolts, clamps, hangers and U-bolts and many more projects..
Check Stock