Reviews Masonry Anchor And Screw Assortments

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock

3/8\ x 2 1/2\ Lag Screw Expansion Shield Long Zinc Alloy Pk 300

  • Expansion shield anchor works with a lag screw to provide a secure hold in most materials including solid masonry, masonry joints, and uncracked concrete.
  • Anchor has an internally threaded body made of zamac alloy.
  • Meets Fed. Spec. GSA FFS-325C Group 2, Type 1, Class 2C specifications.
  • Ultimate tensile strength 420 lb. in 2,000-psi concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

Plastic Wall Conical Anchors for use in Drywall, Hollow Walls and Concrete, Brick, or Masonry 10-12 X 1-Inch, 100-Pack

  • Horizontal fins prevent anchor from turning while screw is put in, Anchor expands and shims the screw.
  • For use in both hollow walls and concrete, brick, or masonry, Very high ease of use.
  • Also known as "Bantam" anchors. Kit Include a 100 #10-#12 blue anchors.
  • 1/4" Drill Size. Once anchor installed, they provide a flush, clean appearance in wall. Packaging design may vary..
Check Stock

Klein Tools 53729 Drywall Anchor Kit for Use in Drywall or Masonry, 100 Anchors

  • Kit contains: 100 #2 Phillips, #10 x 1-Inch Screws, and 100 conical anchors.
  • 1/4-Inch masonry drill bit also included.
  • Light-weight anchor holds screw securely in place.
Check Stock

Shorpioen 100-Pack 1/4 x 1-3/4 Concrete Screw Hex Flanged White No Drill Bit BC-1428CNHFW

  • Building Code Approved. The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Blue ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Hole should be of a depth equal to the required embedment plus 1/2”.
  • The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Check the Item Description to see if a drill is included as well..
Check Stock

50 Pcs 3/8 x 3 Zinc Plated Concrete Anchors Masonry Screws Heavy Duty Carbon Steel Concrete Anchors and Screws Kit Hex Head Large Diameter Concrete Anchor Bolts for Brick Blocks Cement

  • Adequate Quantity: there are 50 pieces of concrete anchors, suitable for large volume work, meeting your daily needs, and can also be shared with your family and friends.
  • Pocket Size: each of concrete screws and anchors is about 3/8" x 3", and weighs only 1.3 ounce/ 37 g, fine workmanship, and easy to carry around, providing you with much convenience.
  • Quality and Sturdy Material: hex concrete anchors are made of carbon steel, with galvanized surface to resist rust, and feature higher hardness, hard and not easy to deform, especially practical for dry environment.
  • Novel Design: featuring low torque threads, masonry screws have deep and clear threads, which can make concrete penetration easily, and also simple to install.
  • The anchor has a finished hex washer head with anti rotation serrations to keep the anchor away from backing out.
  • Wide Range of Applications: hex head concrete screw anchor is mainly designed for concrete, masonry, brick or block.
  • Note that using a standard drill bit for installation, the drill bit size is the same as the anchor diameter.
Check Stock

1/4 x 3-3/4 410 Stainless Steel Flat Phillips Tapcon

  • FREE SHIPPING-All orders $25 or more ship for free.
  • BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost.
  • FLAT PHILLIPS HEAD--Can be driven with Phillips Screw Driver.
  • SELF-TAPPING-Taps threads directly into masonry and requires no other anchor.
  • DIAMOND POINT-Easier to drive the screw to save time.
Check Stock

CONFAST 1/2\ (Inside/Screw 1/2\ - 13) Double Expansion Anchor (20 per Box)

  • Allows for lag screw bolts to be installed into concrete, brick and block.
  • Inserts into a hole by tapping with a hammer until flush.
  • Lag screw expands the lag shield against the walls of the hole.
  • Drill hole with masonry drill bit based on diameter on anchor.
Check Stock

Hurricane Hardware Stainless Steel Phillips Combo Drive Stainless Steel Sidewalk Bolt Kit with Masonry Anchors - 24 Pieces

  • 1/4"-20 x 1-1/2" Phillips Slotted Combo Drive Sidewalk Bolts 18-8 Stainless Steel - 12 pieces.
  • 1/4"-20 Machine Screw Masonry Anchors - 12 Pieces.
  • Commonly used for storm windows and shutters to anchor into brick or masonry wall.
  • Fixtures can be removed or replaced without sacrificing holding power.
  • Corrosion resistant stainless steel screws with caulking type anchors designed to provide a quick setting in brick, concrete or stone.
Check Stock

(Qty 1280) Masonry Screws 1/4” x 2-1/4” Blue, Hex Washer Head Concrete Screws Anchor Block or Brick 128 Pack 10/pp (15.99 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

(Qty 1280) Masonry Screws 3/16” x 1-3/4” Blue, P/Flat Head Concrete Screws Anchor Block or Brick 64 Pack 20/pp (13.96 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

(Qty 1280) Masonry Screws 1/4” x 1-3/4” Blue, Hex Washer Head Concrete Screws Anchor Block or Brick 128 Pack 10/pp (13.96 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

Ribbed Plastic Conical Anchors and Black Cable Screw Clips - for Concrete, Stucco, Brick, Drywall, and Similar - Kit of 100 Screw Clips, and 100 Anchors

  • Includes - Kit Features 100 Plastic Anchors (#10-12 x 1") and 100 Black Cable Screw Clips (#10 x 1-1/4").
  • Function - This plastic anchor and screw set comes in handy for big and small mounting jobs, while providing a supportive role in DIY and professional anchoring Applications.
  • Versatile - Ribbed plastic drywall anchor can be used in wood, brick (masonry), concrete, stucco, sheet metal and/or with lag screws in hollow wall installations.
  • Durable - Anchors are constructed from high quality plastic, Screws are rust and corrosion resistant for long term usage.
  • Quality Assurance - Includes a US manufacturers warranty.
Check Stock