Reviews Threaded End Pressure Relief Valve

Unisex Adult Steampunk Gas Mask Costume Accessory, Gold, One Size

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check Stock

Cressi Mini Console PD2 (imperial)

  • The Mini Submersible Pressure Gauge luminescent dial reads from 0 to 5000 PSI (350 BAR) and is a must-have for any Scuba Diver..
  • For at-a-glance monitoring of air pressure, the instruments face is divided into three different colored zones..
  • The blue zone is the safety zone, indicating an air-pressure from 3000 to 5000 PSI (200 to 350 BAR)..
  • The scale in red indicated when the air is about to end. The alert zone is indicated with red stripes and is when the air pressure is below 600 PSI (50 BAR)..
  • The front glass lens is made to act as a pressure relief valve. n the event of a sudden increase in pressure inside the instrument, the glass rises slightly, allowing the excess pressure to escape..
  • The Instrument is housed in a small, modern shaped boot, made from polycarbonate and Desman, to protection from shocks, scratches and ensure lightness..
  • The Gauge Boot has an attachment point for a clip or lanyard..
  • The Mini SPG is equipped with a 7/16" threaded high-pressure hose..
  • The Mini SPG is developed and made in Italy by Cressi, a brand pioneer in Scuba Diving, Snorkeling and Swimming equipment since 1946..
Check Stock

Futurama Volume Four

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and....
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical....
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The....
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25....
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure....
Check Stock

Universal Car Turbo Charger Manual Boost Controller 1-30 PSI Manual Adjustable Boost Controller - Black

  • Material: The turbocharger pressure regulating valve is made of high-quality aluminum, and the surface is anodized, which is not easy to rust, high temperature resistant, durability and practicality and long service life.
  • Easy to install: It is easy to install, cut the turbo vacuum tube, install the tee, one end of the controller is connected to the vacuum tube, and the other end is connected to the pressure relief valve.
  • Function: The pressure regulator valve adjusts air pressure, improves engine performance and reduces fuel consumption. When the turbine starts, an extremely high pressure is generated inside.
  • Scope of application: Suitable for most turbocharged and supercharged cars.
  • Customer Service: If you are unsure about our products, please contact us through Buyer Information. We will provide you with a solution within 24 hours..
Check Stock

Pentair Triton II Side Mount Filter TR60 Fiberglass Sand Filter without Valve

  • Heavy-duty closure provides easy inspection, and features an easy-to-read pressure gauge with air relief valve. (Valve NOT included).
  • Swing-away diffuser allows instant access to sand and all internal parts..
  • All internal parts are threaded for ease of service..
  • Combination sand and water drain makes servicing and winterizing fast and easy..
Check Stock

Zurn Wilkins 3/4\ 720A Pressure Vacuum Breaker Assembly

  • Maximum working water temperature 110°F.
  • Standards Compliance: ASSE Listed 1020, IAPMO Listed, CSA Certified.
Check Stock

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

  • ...dditional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
  • There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different diameters. Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or fitting with different diameters Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
Check Stock

Dbgogo CGA-320 Keg CO2 Regulator, Brewing Dual Stage Gauge Beer Kegerator Pressure Regulator with 1/4” & 5/16” Quick Disconnect Barb Connectors and Safety Pressure Relief Valve for Co2 Cylinder Tank

  • ...nual pressure relief valve, you can pull pressure relief valve to release excess pressure when brew beer keg pressure reaches 45-50 psi to ensure safety of users and gauges. carbonated beverage brewing kit comes with O.D 1/4″ and 5/16″ quick disconnect barb fittings, which can be connected to co2 regulator beer threaded fitting to attach your I.D 1/4″ and 5/16″ brewing hose, saving your budget!.
  • Easy to install and use, brewing hose clamp strengthens seal, widely application: keg regulator is easy to install and use, just follow installation steps on this detail page or refer to attached product manual, you can easily complete it. included beer line clamps can further seal connection between beer gas tubing and barb fitting to ensure no gas leakage. beer regulator can be connected to your keg ball lock post disconnect, carbonation cap, corny cornelius keg by connecting with gas line..
Check Stock

Watts Brass & Tubular 374A 3/4 Boiler Relief Valve

  • 1/4" male NPT 175 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 175 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock

FOGATTI Pressure Relief Valve 2-Port 3/4 Inches Pressure Relief Valve ANSI Z21.22, 100PSI, Max Heater Input 200,000BTU/HR

  • Guards against excessive pressure in water, oil or air systems used in commercial, residential or industrial applications, including fire protection systems.
  • All-brass construction features an NPT threaded male inlet and NPT threaded female (drain) outlet connections.
  • Calibrated adjustment feature sets valve to the required relief pressure.
  • adjustable range is 50 to 175 psi (3.45 to 12.06 bar).
Check Stock

Legend 350-406 Square Head Pipe Plug, 1-1-4', Threaded, Class 150

  • Brand Name|Legend Valve & Fitting#MFR Part Number|350-406#UPC|662545025223#UNSPSC|40173506#Item|Pipe Plug#Type|Square Head#Nominal Size|1-1-4 Inch#End Style|Threaded#Pressure Class|Class 150#Working Pressure|150 psi#Method of Manufacture|Cupola Casting#Material|Malleable Iron#Material Specification|ASTM A197#Finish|Galvanized#Color|Black#Industry Standards|ANSI B16.3, ANSI B1.20.1#Temperature Rating|200 deg F#Standard-Approvals|NSF 372 Standard, UL Listed, UPC-IAPMO#Application|For Low Pressure.
Check Stock

UPE Group New 1/4 ASME Brass Safety Relief Valve 140 PSI American Made Compressed air pop Off Valve

  • 1/4" male NPT 140 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 70 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock

Mellbree 2pcs Valve Stem Extenders 8.25 Inch Flexible Schrader Tire Valve Stem Extension Compatible for Harleys RV Stroller Bicycles Motorcycles and Portable Air Compressor

  • These long flexible tire air valve extenders successfully solved a series of operations such as inability to pump or check air pressure due to....
  • The threaded head on the valve extenders is screwed on the existing valve stem, and the included end cap replaces the existing valve stem cover.....
  • These tire valve extensions are rubber hoses, flexible and durable, and strong plasticity. With rim clamps, you can work more efficiently, check the....
  • Dually tire valve stem extenders compatible for Harleys, RV, passenger cars, stroller, bicycles, motorcycles, trailers and portable air compressor..
  • You will get 2pcs 8.25 Inch valve stem flexible extension..
Check Stock