Reviews Thread Cutting Reamer
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs
- 【High working efficiency】: This chucking machine reamer set has sharp cutting-edge, high efficiency cutting ability, high accuracy, so your work will become easier under the use of this tools set. Also, this set has a long-term using service life.
- 【High quality materials】: This set of cutter milling reamer is made of high quality and high speed steel materials, so these reamer cutters have high hardness.
- 【Specific and professional use】: This steel milling cutting tool set is designed for reaming to mold processing and handicraft processing.
- 【Wide using range】: This whole chucking reamer set can be widely used for bore machining, installed in drilling machine, milling machine, etc.
- 【Fine process】: This set of chucking reamer tools' surface has processed by iron, plastic, wood, copper, aluminum and other soft materials.
Check StockBurstfire - Primer Pocket Reamer/Crimp Remover & Primer Pocket Uniformer Set - Large & Small - for Reloading
- ...Primer Pocket Reamer is the easiest, fastest, and most effective solution on the market! We redesigned and improved vs others on the market. Normal reamers cut at 35-40 degree angle, which will require excessive metal to be cut for the crimp to be removed. Our reamer cuts at 80-85 degree angle, and requires minimal cutting. A quick “tap and go” is all you need! A little goes a long way..
- Like everything Burstfire, our Pocket uniformed is improved over rest on the market! So what’s diff? All pocket uniformer in the market are made way too small. Result is it creates a circular wobble when attempting to “uniform” the pocket. Which results in more effort/time to cut and uniform the pocket, evenly..
- Made to the correct dimension, cutting the primer pockets at the correctly dimensions in both width and depth, effectively removing that wobble effect, and just enough that it does not remove any metal on the pocket wall..
- Purpose: Uniform uneven primer pockets, to ensure reliable primer ignition, and/or to prevent the possibility of slam-fire from primer not being seated deep enough. Industry standard 8/32 thread can be attached to any prep tool handle, or atop a Case Prep Center..
Check StockQWORK Chucking Reamer Set, 8 Pcs HHS H8 Straight Shank Machine Chucking Reamer Milling Cutter, 3/4/5/6/7/8/9/10mm
- ⭐The reamer set are made of high speed steel, high hardness and good toughness, long service life..
- ⭐With sharp cutting-edge, the chucking machine reamer set have high cutting ability, high accuracy and clean cutting..
- ⭐This HSS H8 reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
- ⭐The straight shank milling cutter tool set are widely used for bore machining, reaming to mould processing and handicraft processing, installed in drilling machine, milling machine, etc.
Check Stock2 Pieces Inner-Outer Reamer Pipe and Tube Deburring Reamer Tubing Chamfer Tool for PVC PPR Copper Brass Aluminum Pipes (Red)
- Package content: you will get 2 pieces tube reamer in red color, which are nice tools applied for removing burrs from pipe edges, and enough quantity can meet your daily needs or replacement.
- Durable material: the main body of the pipe reamer is made of plastic, which is strong and durable, and the internal deburring blade is made of hardened alloy steel, which can provide you with long-lasting use.
- Size: the reamer is suitable for the diameter of pipes from 3/16 inch to 1-1/2 inch, and it can be applied for pipes of various materials such as PVC, PPR, copper, aluminum, brass, aluminum and so on.
- Easy to use: the alloy steel blade can cut copper, aluminum, brass and plastic pipes and other types of tubing quickly and accurately, and you can rotate the screw switch to adjust the distance of the cutting wheel back and forth.
- Convinent design: the burrs can be removed in both clockwise and counterclockwise directions, and the tube reamer is suitable for the inside and outside of the pipeline to use.
- The screw of the pipe cutter can easily control the cutting pressure for clean cutting.
Check StockHand Reamer, Bridge Pin Hole Handheld T Shape Tapered Hex Reamer Handle Drilling Tool 1/8\-1/2\ 3-13mm
- 【HIGH HARDNESS AND DURABILITY 】This machine reamer Made of high speed steel, these reamers have high hardness and durability..
- 【FUNCTION】 T-handle providing optimal leverage.Removable handle for compact storage..
- 【WILDLY USED】Handle drilling tool is suitable for taper holes on top of planks, chamfering, easy screw sinking holes..
- 【SIZE】 Length: Approx. 128mm / 5.0in(Tapered Reamer).
- 【HIGH ACCURACY AND LONG SERVICE LIFE】 This machine reamer with Sharp cutting-edge, high cutting ability, high accuracy, long service life..
Check StockPAGOW 1/2\ Hand Reamer, High Speed Steel H7 6 Straight Groove Reamer, Straight Flutes Hand Milling Cutter Tool
- Premium Material: The material is low alloy steel with high hardenability and low hardenability. The reamer has the characteristics of high wear resistance, less severe cutting and less deformation..
- Hand Reamer: Reamer for reaming holes have been drilled after processing (or reaming) on the workpiece, mainly to improve the precision of the hole, reducing its surface roughness, is finishing and semi-finishing tool for the hole..
- Straight Flute Tool: 6 Flutes & Straight Shank. Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts..
- Application Object: Installed in the lathe for cutting of metal tools. Straight flute hand reamers is used in ferrous metals and most nonferrous metals. Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
- Application: Good for general purpose applications, offering combination of hardness and toughness for wear resistance. Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications..
Check Stockikkle Screwdriver Holder, Wall Mounted Tool Storage Organizer, Pliers Rack Chisel Holder, Upgrade Wood Shop Tools Rack Wrench Clamps Screwdriver Organizer for Workshop Garage and Workbench
- The General Tools and Instruments 131 Screwdriver Handle Reamer, 3/32” – 3/8"offers high-powered cutting in a design that is easy to use.
- The fluted handle allows a familiar, screwdriver grip for heavy cutting and deburring.
- Works easily on steel, brass, aluminum, plastic, wood and wallboard.
- General's easy-to-use reamer is perfect for in home plumbing.
- Actual reamer made of hardened and ground tempered steel.
Check StockSabo Lemon Citrus Reamer Juicer 4-in-1 Multitool with Zester Channel Knife Paring Knife for Cocktail and Bar
- 4-in-1 MULTI TOOL: This multi tool features a lemon citrus reamer for juicing, a paring knife for cutting up lemons and citrus fruits, a channel knife and zester for peeling and garnishing. It is a handy bar tool for making cocktails, drinks, and garnishing along the way..
- FOOD SAFE AND DURABLE: The citrus reamer is made with hard ABS plastic and is FDA compliant food safe. The paring knife and zester is made with sharp polished stainless steel and can last for a long time..
- SAVE YOUR SHELF SPACE: For those who don’t want to have multiple tools hogging up your shelf space in your kitchen, this reamer combines multiple tools into one so you don’t have to look for each individual tool anymore..
- JUST THE RIGHT SIZE: The reamer tool is 6″ long, and the reamer head is just the right size for the average citrus fruits like lemons and oranges..
- DISHWASHER SAFE: The plastic reamer is dishwasher safe and very easy to clean..
Check StockTaper Shank Milling Cutting Tool, Machine Reamer Precise Grinding Grooves 6 Blades Cemented Carbide for Stainless Steel
- Universal Shank Type: This is reamer with glossy surface, widely used, universal shank type, and high grinding accuracy.
- Integral One Time Forming: This integral one time forming reamer, with stable sizes, accuracy hardening, and durability.
- Wide Application: This is reamer, which is widely used for light cutting, repair work, destocking or only for enlarging holes.
- Applicable Materials: Suitable for stainless steel, carbon steel, cast iron, die steel, alloy steel, tool steel, non ferrous metal materials.
Check StockJonard Tools TC-300 Tube Cutter, 1/4\ - 3\ (6.3mm - 76mm), for Copper, Brass, Aluminum, Plastic Pipes and Ducts
- ADJUSTABLE BLADE: Performs radial cuts on 1/4" to 3" (6.3 - 76 mm) copper, brass, aluminum and plastic tubes without damaging anything inside them.
- 4 ROLLER BEARINGS: Securely hold tubes in place while cutting.
- QUICK RELEASE BUTTON: Disengages the tool from the pipe quickly and easily.
- BUILT-IN REAMER: Removable reamer stored neatly in handle for deburring and reaming after cutting.
- INCLUDES: Spare cutting wheel stored within the knob for convienence.
Check Stock17/32 HSS Hand Reamers, Spiral Flute, Right Hand Cut, Michigan Drill Series 565
- Alloy Tool Steel Reamer: Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.
- Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
- Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
- Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
- Application: Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
Check StockADJUSTABLE EXPANDING HAND REAMER 4 PIECE SET 1/4\- 3/8\ - NEW MICRO REAMER SET
- Alloy Tool Steel Reamer: Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.
- Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
- Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
- Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
- Application: Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
Check StockMachine Reamer, Carbide Taper Shank Milling Cutting Tool High Grinding Accuracy for Cast Iron
- Universal Shank Type: This reamer with glossy surface, widely used, universal shank type, and high grinding accuracy.
- Application: This is a reamer, which is widely used for light cutting, repair work, destocking or only for enlarging holes.
- Applicable Materials: Suitable for stainless steel, carbon steel, cast iron, die steel, alloy steel, tool steel, non ferrous metal materials.
- Fine Grinding Grooves: Precise grinding grooves, high efficiency and flexibility, direct unhindered chip removal, beautiful and delicate, effective, labor saving, and fast drilling speed.
- Integral One Time Forming: Integral one time forming reamer, with stable sizes, accuracy hardening, and durability.
Check Stock