Reviews Thread cutting Screws

#8 x 2-1/4 Stainless Steel Deck Screw Phillips Drive Bugle Head Quantity 500 Type 17 Wood Cutting Point 1-1/2 of Thread Length 8 Screw Diameter 2-1/4 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws (Drywall Screws) are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • GREAT TO KEEP AROUND: 18-8 Stainless Steel is the ideal material for both corrosion resistance and strength. Why use any other screws and worrry about rusting, corrosion and eventual replacement. Ideal for use in wood, composite material and even wet environments! Newport Fastener Screws are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Phillips drive.
  • Size Number: #8 / Length of Screw is 2-1/4" inches with 1-1/2" inches of thread.
Check Stock

#10 x 2-3/4\ Stainless Steel Wood Screw Square Drive, Bugle Head (Quantity: 1400) Type 17 Wood Cutting Point, 1-7/8\ of Thread Length, 10 Screw Diameter, 2-3/4\ Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #10 Wood Screws (Drywall Screws) are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • GREAT TO KEEP AROUND: 18-8 Stainless Steel is the ideal material for both corrosion resistance and strength. Why use any other screws and worrry about rusting, corrosion and eventual replacement. Ideal for use in wood, composite material and even wet environments! Newport Fastener Screws are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #2 Square Drive.
  • Size Number: #10 / Length of Screw is 2-3/4" inches with 1-7/8" inches of thread.
Check Stock

#10 x 3 Stainless Steel Deck Screw Square Drive Flat Head with 4 Nibs Underhead Quantity 100 Type 17 Wood Cutting Point 2 of Thread Length 10 Screw Diameter 3 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #10 Wood Screws (Drywall Screws) are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • GREAT TO KEEP AROUND: 18-8 Stainless Steel is the ideal material for both corrosion resistance and strength. Why use any other screws and worrry about rusting, corrosion and eventual replacement. Ideal for use in wood, composite material and even wet environments! Newport Fastener Screws are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #2 Square Drive.
  • Size Number: #10 / Length of Screw is 3" inches with 2" inches of thread.
Check Stock

Spax T-Star Plus, Plate Head Wood Screw, Partially Threaded, 4Cut mm A3J, 251010801205

  • Usage: for fixing rafters or roof insulation. Exclusive WIROX coating from SPAX.
  • Better traction during screwing thanks to washer head. Optimal power transmission and better fit on SPAX T-STAR plus T40 with guide pin, even with overhead work.
  • Power and battery saving: no need for pre-drilling (depends on wood). Reduced splitting of wood due to 4CUT tip with 4 sides. Standard SPAX corrugated profile for easy separation of wood fibers.
  • Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
  • Contents: 1 SPAX box, 50 wood screws, T-STAR plus, Washer head, Full thread, 4CUT point, WIROX coating, Thread diameter (脴d1)= 8mm x Total Length (Ls) = 120mm, Full Thread Length (LgV) = 80mm, Head diameter (脴dk) = 20mm, Bit not included.
Check Stock

Spax T-STAR Plus, 4Cut Panhead – Universal Screw, fully threaded, Stainless Steel A2, 1.4567 – 0207000350203, 0207000400303

  • Usage: Universal outdoor. High corrosion protection thanks to A2 stainless steel.
  • Pan head. Ideal for fixing fittings. Optimal power transmission and better fit on SPAX T-STAR plus T20 with guide pin even with overhead work.
  • Power and battery saving: no need for pre-drilling (depends on wood). Reduced splitting of wood due to 4CUT tip with 4 sides. Standard SPAX corrugated profile for easy separation of wood fibers.
  • Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
  • Contents: 1 SPAX box, 200 universal screws, T-STAR plus, Pan head, Full Thread, 4CUT point, Stainless steel A2, 1.4567, Thread diameter (脴d1)= 4mm x Total Length (Ls) = 30mm, Full Thread Length (LgV) = 27mm, Head diameter (脴dk) = 8mm, Bit not included.
Check Stock

Spax T-STAR Plus, 4Cut Panhead – Universal Screw, fully threaded, Stainless Steel A2, 1.4567 – 0207000350203, 0207000400203

  • Usage: Universal outdoor. High corrosion protection thanks to A2 stainless steel.
  • Pan head. Ideal for fixing fittings. Optimal power transmission and better fit on SPAX T-STAR plus T20 with guide pin even with overhead work.
  • Power and battery saving: no need for pre-drilling (depends on wood). Reduced splitting of wood due to 4CUT tip with 4 sides. Standard SPAX corrugated profile for easy separation of wood fibers.
  • Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
  • Contents: 1 SPAX box, 200 universal screws, T-STAR plus, Pan head, Full Thread, 4CUT point, Stainless steel A2, 1.4567, Thread diameter (脴d1)= 4mm x Total Length (Ls) = 20mm, Full Thread Length (LgV) = 18mm, Head diameter (脴dk) = 8mm, Bit not included.
Check Stock

Spax T-Star Plus, Plate Head Wood Screw, Partially Threaded, 4Cut mm A3J, 251010803405

  • Usage: for fixing rafters or roof insulation. Exclusive WIROX coating from SPAX.
  • Better traction during screwing thanks to washer head. Optimal power transmission and better fit on SPAX T-STAR plus T40 with guide pin, even with overhead work.
  • Power and battery saving: no need for pre-drilling (depends on wood). Reduced splitting of wood due to 4CUT tip with 4 sides. Standard SPAX corrugated profile for easy separation of wood fibers.
  • Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
  • Contents: 1 SPAX box, 50 wood screws, T-STAR plus, Washer head, Partial thread, 4CUT point, WIROX coating, Thread diameter (Ød1) = 8mm x Total Length (Ls) = 340mm, Length of partial thread (LgT) = 80mm, Head diameter (Ødk) = 20mm, Bit not included.
Check Stock

Power Pro 48610 Wood Screws, #9 x 2-1/2\

  • 【HIGH QUALITY MATERIAL】:Made of Carbon Steel, resistant to rust,good corrosion resistance in bad environment,commonly have a sharp point that helps penetrate the material..
  • 【MATERIAL & WORKMANSHIP】:Adopting high-precise cutting technology, the screw thread is very precise, clean, sharp, the deep and clear thread can easily penetrate the wood and plastic and ensure a secure hold,is not easy to deform and slid while using..
  • 【PACKAGE INCLUDES】:8 Kinds Phillips Flat Head Self-Tapping Screws. Contains M3 x 6mm/8mm/10mm/12mm/16mm/20mm/25mm/30mm wood screws and M6 screw anchors, meet all your demands..
  • 【STORAGE BOX】: There are 420 pcs different types of screws. All of screws will be packed in a sturdy convenient case, can be used for a storage box, is organized to you..
  • 【WIDE APPLICATION】:Self tapping wood screws are mainly used in metal, plastic or board articles,such as gypsum boards, wooden board, ceiling, partitions,etc.Widely used in electrical products,communication equipment, ship assembly,machinery, furniture,other maintenance work,DIY arts and craft..
Check Stock

Spax M Countersunk Head with Milling Ribs, Partially Threaded T-Star Plus with Cut Point, 4 x 40 MM, Galvanised, 200 Stück

  • Use: For screwing MDF materials and other thin-walled panels made of wood-based materials indoors. Spax-exclusive Wirox surface.
  • Countersunk head with milling ribs pulls particularly easily into the material and can be recessed flush Optimum power transmission and clean fit with Spax bit T-Star plus T20 with guide pins.
  • and longer battery life: no pre-drilling (depending on the wood). Precise positioning and reduction of the splicing effect thanks to the drilling function of the CUT tip. Easier cutting of the wood fibre thanks to Spax-typical wave profile.
  • Made in Germany: TUV certified. Certified for use in the technical approval for screws as a wood connecting medium in carrying wood constructions (ETA-12/0114).
  • Box contents: 1 Spax-M box, 200 pieces MDF screws, T-Star plus countersunk head, 75° milling head, partial thread, CUT tip, Wirox surface, thread diameter (Ød1) = 4 mm x total length (Ls) = 40 mm, partial thread length (LgT) = 28 mm, head diameter (Ødk): 7 mm, bit not included.
Check Stock

Spax – Universal Screw 3/blank Galvanised Partially Threaded, Countersunk T-Star plus 4Cut, A2J – 0191010350303, 191010400303

  • Usage: Universal indoor or outdoor without direct exposure to weather elements. Exclusive WIROX coating from SPAX聽: Corrosion resistance 20 times stronger than standard white galvanized coating.
  • MULTI head: Easy penetration and simplified screwing. Mills in wood and stops on metal. Optimal power transmission and better fit on the T20 bit, even with overhead work, thanks to the T-STAR plus guide pin.
  • Power and battery saving: no need for pre-drilling (depends on wood). Easy screwing. Reduction of wood splitting with four-sided 4CUT tip. Typical SPAX corrugated profile for easier separation of wood fibers.
  • Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
  • Contents: 1 SPAX box, 200 universal screws, T-STAR plus, Countersunk head, Partial thread, 4CUT point, WIROX coating, Thread diameter (脴d1)= 4mm x Total Length (Ls) = 30mm, Length of partial thread (LgT) = 18mm, Head diameter (脴dk) = 8mm, Bit not included.
Check Stock

Taezn 40 Pieces Wall Plate Screws 1.2 Inch Long Outlet Screws Perfect Replacement for Outlet Cover Screws,Switch Plate Screws Light Plate Screws

  • 【Package Content】You will receive 40 pieces 1.2 inch long 6-32 thread white wall plate screws. extra long size and Sufficient amount to meet your needs.
  • 【Elegant Design】Our long outlet cover screw features a slotted oval head with nice white paint cover and wear-resistant, giving the outlet a good quality appearance, proper and beautiful.
  • 【High Quality】Our extra long electrical outlet screws are made of carbon steel, sturdy and durable. Thread cuts are flawless, head shape is stunning and elegant, paint is pure and perfect.
  • 【Wide Applications】Light switch plate screws are suitable for home, office and other occasions. Can be used to replace lost or painted over screws, ugly screws, old looking screws and so on.
  • 【Particular Attention】 Please check whether your wall plate matches our size before purchasing. Our package contains a free plastic box to store and carry.
Check Stock

#14 x 4 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 500 Type 17 Wood Cutting Point 2-3/4 of Thread Length 14 Screw Diameter 4 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
  • Size Number: #14 / Length of Screw is 4" inches with 2-3/4" inches of thread.
Check Stock

#14 x 5 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 100 Type 17 Wood Cutting Point 3-1/4 of Thread Length 14 Screw Diameter 5 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
  • Size Number: #14 / Length of Screw is 5" inches with 3-1/4" inches of thread.
Check Stock