Reviews Thickness Meter Series

LC200A Inductance Inductor Capacitance Capacitor L/C Multimeter Meter Tester

  • This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range is 0.001-100.0R, support in circuit testing..
  • It is the series resistance inside the capacitor, and 100kHz is used to remove the impedance 1/(2*pi*F*C). When the impedance becomes smaller, the real series resistance value can be measured to determine whether the capacitor is bad/damaged or in good condition..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test..
  • During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.【Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.】.
  • Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.Equipped with a SMD alligator clip for more accurately testing..
Check Stock

Diamond Original CR8900A Quad Band FM Mobile Antenna

  • The CR8900A is pretuned to give best bandwidth and VSWR over the FM portions of 10m, 6m, 2m, and 70cm ham bands when mounted on the side of vehicle (i.e. trunk lid) using a K400 or K600 series mount..
  • Designed specifically for the Yaesu FT-8900R.
  • The Diamond CR8900A quadband is a 10 meter, 6 meter, 2 meter and 440 MHz mobile antenna. It is a 1/4 wave on 10 and 6 meters providing and a 1/2 wave on 2 meters (2.15 dBi gain) and a 2 5/8 wave on 440 MHz (5.5 dBi gain). This antenna can handle up to 60 watts FM..
  • There are two center coils and a base coil. The connector type is UHF (for PO mount). The antenna is pretuned to give the best performance over the FM portions of the 10m, 6m, 2m and 70 cm bands when mounted on the side of the vehicle (such as a trunk lip mount). Suggested mounts would include the K400 or K600 series. This antenna is not recommended for a magnet mount or through-the-roof mounts. Includes an Allen wrench for tuning..
Check Stock

ASCELY Bicycle Spoke Tension Meter Tool, Aluminum Alloy Wheel Repair Tool for Bike Wheel Repairing and truing

  • 1.Universal --ASCELY’s universal spoke tension meter measures the spoke tension on any kind of spoke,it is for anyone building or truing wheels, diagnosing wheel problems, or assembling new bikes. It’s a tool that belongs on every workbench..
  • 2.Premium Quality-- The spoke tension meter of practical tough and stable is made of aluminum alloy stainless steel,The analog spoke tension meter arrives calibrated and ready to use..
  • 3. Simply To use--simply press the handle, position the spoke between the two pins and release the handle. The properly designed gauge is easy to read..
  • 4.Precise Measurement -Measured value, needs to be checked in the spoke information table, from where you read the actual tension, based upon the spoke specification..
  • 5. The printed table is included with the tool, together with more precise usage instructions. Additional included feature on the tool is also a spoke thickness gauge, which helps with the whole process. Simply insert the spoke in one of the upper openings and read the spoken thickness value..
Check Stock

Paint Coating Thickness Gauge, ERAY Digital Depth Mil Thickness Meter with Backlight LCD Display for Car Automotive, 320 Measurements Store/USB Data Download Analysis/Limit Alarm (Grey)

  • √ Fe/NFe Dual Probe: The measuring range of this paint thickness gauge is 0 to 2000um(78.7mils). 4 general groups can store max. 320 readings when power off, 80 readings per group.
  • √ Coating Thickness Gauge: Human-oriented interface with backlight LCD dispaly, user can set the parameters visually before using it. And easy to store, recall or delete the readings.
  • √ CD & USB Cable: User can view and analyze the measurement via USB interface to data transmission after installing the software in CD to PC. Low battery and error indication.
  • √ ALARM Function: ERAY paint thickness meter is better for special security requirements, user can set high or low limit alarm, alarm icon displayed on LCD when over the limit.
  • √ Widely Used: This coating thickness meter is suitable for laboratory, workshop, paint shops, automobile, shipbuilding, aircraft industries, etc. 24 months free replacement.
Check Stock

Paint Coating Thickness Gauge, ERAY Digital Depth Mil Thickness Meter with Backlight LCD Display for Car Automotive, 320 Measurements Store/USB Data Download Analysis/Limit Alarm (Green)

  • √ Fe/NFe Dual Probe: The measuring range of this paint thickness gauge is 0 to 2000um(78.7mils). 4 general groups can store max. 320 readings when power off, 80 readings per group.
  • √ Coating Thickness Gauge: Human-oriented interface with backlight LCD dispaly, user can set the parameters visually before using it. And easy to store, recall or delete the readings.
  • √ CD & USB Cable: User can view and analyze the measurement via USB interface to data transmission after installing the software in CD to PC. Low battery and error indication.
  • √ ALARM Function: ERAY paint thickness meter is better for special security requirements, user can set high or low limit alarm, alarm icon displayed on LCD when over the limit.
  • √ Widely Used: This coating thickness meter is suitable for laboratory, workshop, paint shops, automobile, shipbuilding, aircraft industries, etc. 24 months free replacement.
Check Stock

Paint Thickness Gauge TC100 Car Coating Thickness Meter for Used Car Buyers Paint Mil Thickness Meter Gauge Check The Car’s Original Coating Auto Car Paint Meter

  • 【Auto Reads Steel and Aluminum】Coating Paint thickness gauge Designed with dual technology, the non-destructive Coating Thickness Tester takes the guess work out of testing surface coatings by providing automatic recognition for both ferrous and non-ferrous substrates..
  • 【A Useful, Versatile Meter for Many Applications】 Ideal for checking the car painting thickness checker, like used cars paint, powder coating, anodized aluminum, bathroom fittings, bike frames, stadium seats, outdoor sheds, furniture, swing sets, cabinets and lockers, computers, appliances, and toys..
  • 【Automotive perform on used car, save money】 Sometimes body shops do a great job hiding visually everything that couldn’t tell us that the car was involved in a heavy crash. Checking car paint to make sure each panel has about the same thickness of paint on it when buying used cars..
  • 【Easy to Read Display】Paint depth thickness gauge with the large Screen display shows metal type, working mode, number, battery status, and readings either in µm or mils units..
  • WHY CHOOSE RDINSCOS -- RDINSCOS tools are known for their affordability, quality and reliability. So reliable, that we back this paint thickness meter with a 3-year-replacement-warranty. If it let’s you down, we’ll....
Check Stock

1/3 Ct Diamond Solitaire Pendant Necklace in 14k White Or Yellow Gold

  • The CR8900A is pretuned to give best bandwidth and VSWR over the FM portions of 10m, 6m, 2m, and 70cm ham bands when mounted on the side of vehicle (i.e. trunk lid) using a K400 or K600 series mount..
  • Designed specifically for the Yaesu FT-8900R.
  • Heavy Duty Hex-Style Fold-Over, Multi-band, UHF female.
  • The Diamond CR8900A quadband is a 10 meter, 6 meter, 2 meter and 440 MHz mobile antenna. It is a 1/4 wave on 10 and 6 meters providing and a 1/2 wave on 2 meters (2.15 dBi gain) and a 2 5/8 wave on 440 MHz (5.5 dBi gain). This antenna can handle up to 60 watts FM..
  • There are two center coils and a base coil. The connector type is UHF (for PO mount). The antenna is pretuned to give the best performance over the FM portions of the 10m, 6m, 2m and 70 cm bands when mounted on the side of the vehicle (such as a trunk lip mount). Suggested mounts would include the K400 or K600 series. This antenna is not recommended for a magnet mount or through-the-roof mounts. Includes an Allen wrench for tuning..
Check Stock

SHYC Thermometer Temperature Transparent Clear Outdoor Window Thermometer Clock Weather Tool

  • The transparent temperature monitoring meter can be mount to windowpane outdoor, you can reading the outdoor temperature in the room..
  • The transparent temperature monitoring meter owns built-in highly sensitive precision bimetals to sense the temperature change..
  • The thermometer adopts 3mm thickness acrylic as dial and stainless steel as chip shell, which is durable and wear resistant..
  • The thermometer is detachable, which is convenient to clean and recalibrate the recalibrating..
  • The temperature monitoring meter is practical in winter, when the indoor and outdoor temperature difference is large..
Check Stock

MESR-100 Capacitor Tester,Geevorks Circuit Tester Ohm Meter 0.001-100.0R with SMD Test Clip,Auto-Ranging Capacitor for Measuring Capacitance Resistance Circuit

  • This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range is 0.001-100.0R, support in circuit testing..
  • It is the series resistance inside the capacitor, and 100kHz is used to remove the impedance 1/(2*pi*F*C). When the impedance becomes smaller, the real series resistance value can be measured to determine whether the capacitor is bad/damaged or in good condition..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test..
  • During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.【Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.】.
  • Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.Equipped with a SMD alligator clip for more accurately testing..
Check Stock

TTartisan Light Meter with Two Dial to Adjust ISO, Aperture and Shutter Speed, Compatible with Older Leicas and Similar Rangefinder Cameras Black

  • Compact and lightweight: The TTartisan meter is a small, lightweight accessory meter that weighs only 35g, it serves well for people who use older Leicas and similar rangefinder cameras..
  • Shoe-mount design: The meter conveniently slips into the camera's shoe while readings are taken..
  • Two dials: one for ISO and aperture and another one for shutter speed allow settings to be made..
  • LED indicator: A series of LEDs illuminate to tell the user when the correct measurement has been achieved.The TTartisan meter is available in silver or black colours..
  • Mechanical range Limit:Limited by the mechanical range of the dial ligth meter When ISO is 25, the aperture setting with F-number greater than 8.0 is not possible When ISO is 50, the aperture setting with F-number greater than 11 is not possible When ISO is 100, the aperture setting with F-number greater than 16 is not possible.
Check Stock

DE-5000 Handheld LCR Meter

  • This LCR Meter is a 19999/ 9999 counts dual display, high accuracy LCR meter, which could measure Inductance/ Capacitance/ Resistance with secondary parameters including dissipation factor (D), quality factor (Q), phase angle , equivalent series/ parallel resistance (ESR or Rp)..
  • This LCR Meter is fully auto ranging operation for AC impedance & DC resistance measurement. The user could measure the L/C/R components directly in “AUTO-LCR “ smart mode without selecting the function key..
  • Components could be measured in serial or parallel mode according to the DUT (device under test) impedance automatically.User could select the desired test frequencies of 100Hz/120Hz/1kHz/10kHz /100kHz..
  • The "Sorting"mode could help the user to make a quick sort for a bunch of components..
  • Standard Accessories: English PDF manual, DC9V Battery, Alligator test lead case(TL-21), SMD Tweezers case(TL-22), Guard Line(TL-23),,,,, Option: IR to USB cace *It isn't included..
Check Stock

UEI CLM100 Digital Electric Cable Length Meter, Wire Length Meter Measuring Ohm Resistance 65Ω, 30,000 Feet, Copper and Aluminum Wire between 4/0 to 26 ga

  • ️ INDUSTRIAL DESIGN: Our Cable Length Meter is designed for industrial purposes measuring both copper and aluminum cables. It is great for an electrician, wholesaler, contractors, and installers..
  • MEASURES 30,000 FEET: This tester can measure wire up to 30,000 feet, making it great for spoils of any size..
  • ⚙️ WIDE RANGE: The CLM wire length meter can measure any thickness between 4/0 ga to 26 ga for all kinds of spools and wire sizes..
  • ENHANCED SPECS: The Cable Length Meter can measure milliohms, Resistance up to 65Ω, and wire between 250-5000 MCM. Also built into the meter is a calibration mode to make sure that instrument is always reading properly..
  • ✅ 5-YEAR WARRANTY: The CLM100 has a 5-Year limited warranty. All warranties must be redeemed in the US..
Check Stock

Air Intake Mass Elbow Boot Hose Tube Replacement for BMW E39 E46 323i 325i 328i 525i 528i Z3 M52 M54 13541435627

  • YHTAUTO Air mass meter boot are precisely manufactured with high quality material, it is a rubber or plastic shell that covers the air mass meter.
  • Replacement for Select BMW E36 E39 E46 Series 2.5L 2.8L Models, input your make, model, year and trim level into the amazon garage tool to verify if it fits your car.
  • Reference Number: 696-059, 1354143562, exceeds or meets OE performance, protecting air mass meter from damage from particulates or small pieces of debris in the engine compartment.
  • If the air mass meter boot cracks or breaks, it should be replaced as the readings from the sensor might be thrown off by the damage.
  • Please double check your vehicle fits our Compatibility Chart before buying. Do not hesitate to contact us if you have any doubts or queries.
Check Stock