Reviews Thermocouple Transmitter

ennoLogic Volt mA Thermocouple Loop Process Calibrator eC370T - 0-20V and 4-20mA Simulator – Portable Millivolt mA and Temperature Signal Generator and Meter for Transmitters Current Loops PLC

  • VERSATILE AND ACCURATE VOLT MA THERMOCOUPLE CALIBRATOR: Signal generator, simulator and volt / mA meter for calibrating, testing and repairing milliamp loops, thermocouples, PLC, temperature control and HVAC systems. Easily generate precise test signals for current and voltage devices (mA, mV, V, Celsius and Fahrenheit ranges)..
  • NUMERIC KEYPAD for ease and flexibility in setting output signals configuring options. HOTKEY programming for each numeric key (long-press immediately outputs user-configured voltage, current or temperature signal). RAMP AND LADDER OUTPUT FUNCTIONS can be custom configured. BUILT-IN 24V LOOP SUPPLY lets you power and read a device or transmitter without needing another multimeter. This greatly simplifies testing 2-wire current loops..
  • MEASURE VOLTAGE OUTPUT SIGNALS from process devices and sensors with two input ranges of 0-100mV (0.01mV resolution, 0.06% accuracy) and 0-20V (1mV resolution, 0.08% accuracy). MEASURE CURRENT TRANSMITTERS within a range of 0 to 24mA with 0.001mA resolution and 0.08% accuracy. MEASURE THERMOCOUPLE TEMPERATURES within a range of -250°C to +1800°C and resolution of ±0.7°C to ±2°C (range and resolution depends on thermocouple type, supported are type K, J, E, T, N, S, R, and B.).
Check Stock

120630-02 Pilot ODS for Vent Free Propane Gas Wall Heaters by DESA, Glo- Warm

  • The 120630-02 Pilot ODS assembly was used on many of the unvented LP Gas wall heaters and LPG unvented gas log sets and fireplaces..
  • The 120630-03 Pilot ODS assembly take the 120790-01 Dual Wire Thermocouple. The 120790-01 Thermocouple Dual Wire 33 Inch Length with silver and brown transmitter wires that fits the Desa International Unvented Vent-Free infrared gas wall heater..
  • Many of the Unvented Gas Logs sets, Wall Heaters and fireplaces that used the 120630-02 Pilot ODS were made by DESA International and sold under many different brand names by Lowe's, Ace Hardware, Home Depot, Sears, Menards Store and other retailer throughout North America.
  • Some of the Brand Names were Vanguard, Comfort Flame, Glo-Warm, Cozy Heat, Kozy World, Pro Com, Desa International and others..
  • Replaces part numbers: 098245-01, 098245-03, 099440-02, 099440-06, 107667-02, 110803-02, ene 56817, ene 70366, J5527 F.
Check Stock

Mr. Heater Rotor Kit with Rotor Vanes Nylon Drive for 2003 or Newer Forced Air Kerosene Heaters

  • The 120630-01 Pilot ODS assembly was used on many of the unvented Natural Gas Gas wall heaters and NG unvented gas log sets and fireplaces..
  • The 120630-01 Pilot ODS assembly take the 120790-01 Dual Wire Thermocouple. The 120790-01 Thermocouple Dual Wire 33 Inch Length with silver and brown transmitter wires that fits the Desa International Unvented Vent-Free infrared gas wall heater..
  • Many of the Unvented Gas Logs sets, Wall Heaters and fireplaces that used the 120630-01 Pilot ODS were made by DESA International and sold under many different brand names by Lowe's, Ace Hardware, Home Depot, Sears, Menards Store and other retailer throughout North America..
  • Some of the Brand Names were Vanguard, Comfort Flame, Glo-Warm, Cozy Heat, Kozy World, Pro Com, Desa International and others..
  • The proper ODS Pilot Assembly must be used for the correct model number heater..
Check Stock

Dry Block High Temperature Calibrator Range 50 to 650°C with Thermocouples T J K N R S for Calibration Labs Pharmaceutical Divisions Thermal Plants Metallurgical Plants Model AI-DBC-02

  • Accuracy: ±0.025% of Reading + 0.25 mV | Volts Range: 0 to 10.000 V.
  • Accuracy: ±0.025% of Reading + 3 mV | Ohms Range: 0 to 400 Ohms.
  • Accuracy: ±0.025% of Reading + 0.1 Ohm | RTD3 Range: -200 to 8500 C.
  • Thermocouple Types: T, J, K, N, R, S | Thermocouple Range( T,J,K,R,S): -200 to 400°C.
  • Accuracy: ±0.025 % of Reading + 1°C |Thermocouple Range(R,S): 300 to 1760°C.
  • Supply Scope: 1 Unit of DBC-02 Dry Block Calibrator, Power Cable, 1 Unit of Test Lead (2 Wire), Insertion Tube: Dual Hole - 1 x 1/4” + 1 x 12.5 mm, Dual Hole - 1 x 1/4” + 1 x 8.2 mm, 1 Unit of Insertion Tool, 2no.s of 6A Spare Fuses, Instruction Manual and Factory Calibration Certificate | Applications: Calibration Labs, Pharmaceutical Divisions, Thermal Plants, Metallurgical Plants.
Check Stock

Signal Isolator, Signal Conditioner Current 4-20mA for Transmitter for Isolated Power Distribution Power Supply

  • High quality signal isolator, stable performance, durable and reliable..
  • Strong input signal processing ability, able to accept and process thermocouple, thermal resistance, frequency and other signals.
  • Have the advantage of high precision,high linearity and strong anti-interference..
  • The input, output and power are isolated from each other by adopting highly efficient magnetoelectric isolation technology interiorly..
  • This signal isolator provides isolated power distribution power supply for transmitter,meanwhile it isolates and converts the current signal to control room..
Check Stock

70366 Pilot ODS for Vent Free Propane Gas Wall Heaters for Mr Heater Enerco Heatstar

  • The 70366 Pilot ODS assembly was used on many of the unvented LP Gas wall heaters made by Enerco under the Mr Heater and Heatstar labels..
  • These models include: MHBF10LP, MHIR10LP, TSBF10LP, TSIR10LP, MHBF30LPT, HSBF10LP and others..
  • The 70366 Pilot ODS assembly has Dual Wire 33 Inch long thermocouple with the silver and brown transmitter wires..
  • The proper ODS Pilot Assembly must be used for the correct model number heater..
  • Please check the model and part number in your owner’s manual before ordering this ODS Pilot Assembly..
Check Stock

Thermco ACC310DLSDIG Laboratory Long Stem Digital Thermometer, 12\ Stem Length, -50 to 300°C Range, +/-1.0°C Accuracy

  • High Temperature K-type Thermocouple Thermometer Set with Stainless Steel Probe.
  • K-type thermocouple wire with Standard Accuracy: +/- 2.2 °C or +/- .75%.
  • 5 ft (155 cm) long thermocouple cable with braided stainless steel cover, mini thermocouple plug made from chromel / alumel.
  • Temperature measurement range: -328 to 932 °F (-200 to 500 °C), short term 1472 °F (800 °C).
  • Grounded K-type Thermocouple junction for fast measurements, 1x 9V battery included.
Check Stock

3\ Outside Air Kit for Pellet Stoves with 3\ Air Intake Pipe Including Harman Stoves 3\ X 10'

  • QuadraFire Thermocouple 800, 1000, 1100i, 1200, 1200i Pellet Stoves 812-0210.
  • Top Quality Aftermarket Replacement Part.
  • The Thermocouple is the device that monitors the fire after start-up. Once it reaches temp the thermocouple allows the stove to start feeding on it's own in normal operation mode. If your stove goes out after the initial start-up cycle, more than likely the thermocouple needs to be replaced..
  • Designed Specifically for the above mentioned models.
Check Stock

Montague OVEN THERMOCOUPLE 48\ 1036-7

  • K-type thermocouple connector with real chromel alumel contacts.
  • Miniature or mini k-type connector dimensions.
  • Works with all k-type thermocouple wires and extension wires.
  • Set of 10 male mini thermocouple connector plugs.
  • Compatible with thermocouple plugs from other manufacturers.
Check Stock

Emerson H06F 36 Universal Junction Block Thermocouple 36 inch

  • 36 inch junction block thermocouple with energy cut-off.
  • Stainless steel element construction for prolonged thermocouple life.
  • Standard coaxial thermocouple 11/32 inch double lead thread.
  • Universal adapter fittings included with each kit for replacing thermocouple in most types of pilot burners.
  • Works for both LP and natural gas applications.
Check Stock

Cooper Atkins 35132 Aquatuff with Wrap&Stow Duraneed

  • Waterproof Thermocouple Thermometer - Precise digital thermocouple thermometer, delivers a true +/- 0.9 degrees Fahrenheit accuracy and probes can be replaced in the field without the need for recalibration.
  • Heavy Duty Probe Cable - Patented thermocouple thermometer probe cable that neatly wraps and stows around the instrument. Uses any K Type probe.
  • DuraNeedle Probes - Best used for dense meats. Also works well with soft foods and liquids. Probe is calibrated with instrument for Total System Accuracy.
  • Waterproof Digital Thermocouple - Large easy to read digital LCD display, auto shutoff after 10 minutes of non-use. IPX7 waterproof rated.
  • Cooper-Atkins Corporation - Headquartered in Middlefield, CT, Cooper-Atkins has been a leading manufacturer of quality time, temperature, and humidity instruments serving the Foodservice, HVAC and Healthcare markets since 1885.
Check Stock

GBC Document Camera, Discovery 3000 (DCV10004)

  • pyrometer Temperature range: -50°C to 1300°C ( -58°F to 2372°F) and Overload display alert when input exceeds measurement range pyrometer. Thermocouple Temperature range: -50°C to 1000°C ( -58°F to 1832°F).
  • Designed for use with K-type thermocouples and Selection between Celsius and Fahrenheit.
  • Decimal or round number display selectable (decimal range is -58.0F to999.9F and round number range is -58F to 2372F).
  • Includes 2 Thermocouples ( One 3" K type temperature probe (-58 – 752 °F) and one Kiln Heavy duty K type Thermocouple ( -58°F to 1832°F) and Digital Pyrometer, 9V battery and Manual.
  • Thermocouple Measurement range: 32 - 1832 °F (0 - 1000 °C) Thermocouple Type: K Type Cable length : 3 ft Sensing tip length: 6" (150mm) Stainless Steel Sensing tip diameter: 0.19" (5mm) Thread width : 5/16" (M8) Internal Insulation: Fiber Glass External shielding: Metal Shield (Stainless steel braided).
Check Stock

Coolrunner Gas Patio Heater Repair Replacement Parts Outdoor Heaters Safety Kits Thermocouple (M8 x1) and FD4 Dump Switch for Propane Gas Patio Heater

  • Well Made & More Safe: The thermocouple is made of brass and red copper and the anti-tilt switch, made of ABS, which will automatically stop heating when the gas heater is tilted..
  • Wide Compatibility: The patio heater thermocouple replacement is suitable for most of propane heater, patio heater and other gas heaters with thermoelectric safety..
  • Dimension: The total length of thermocouple is 350mm, thermocouple probe is M6*0.75 and threaded end is M8*1, please measure your original parts before ordering. Weak current FD4 dump switch is for gas R≤10 mΩ..
  • Easy to install: It is easy to replace just follow the way you remove the defective part. Notice: Keep the thermocoupler probe about 5mm from the burner hole..
  • Great Value for Money: If the thermocouple or dump switch of your gas heater is broken, you just need to change the replacement that will save $200 for you..
Check Stock