Reviews The Ultimate Sharpening Jigs

Robert Sorby 67HS 6 Piece Lathe Turning Set with 3/4\ Spindle Roughing Gouge, 3/8\ Spindle Gouge, 3/8\ Bowl Gouge, 3/4\ Standard Skew Chisel, 1/8\ Parting Tool and 1/2\ Round Nose Scraper 67HS

  • Sharpen chisels, gouges, bowl gouges, spindle gouges, carving tools, wood turning scrapers, parting tools, block plane irons and more with the PRO GRIND Sharpening System! With 3 primary methods of sharpening, you’ll be able to precisely hone each tool to your exacting specifications regardless of the tool you are sharpening. The PRO GRIND Sharpening System includes a vast collection of unique setup tools, jigs and accessories that most sharpening systems force you to purchase separately.
  • The included and versatile Multi-Grind Jig will correctly shape the edge on bowl gouges, side grinds (aka Ellsworth grind, Liam O’Neil grind/Irish grind) or fingernail grinds for spindle work and detailing. Not only will it correctly shape your tools, you will also be able to repeat the process to produce consistent results every time. The Multi-Grind Jig is designed to be used with the included Multi-Grind arm on the PRO GRIND Sharpening System and will accept tools up to 1.125” in diameter..
  • The PRO GRIND Tool Rest Bar attachment offers you the best possible way to achieve a precise edge to your bevels without taking of too much material off of your tool. After all, we need our tools to last a long time, so why would you want to take off to much at a time? The....
Check Stock

RIKON Power Tools 82-100 8 Wet Sharpener

  • 1/4 HP motor geared for adjusting wheel speeds of 90-150 RPMs.
  • 220 grit abrasive wheel will put precision edges on big or delicate tools.
  • Leather honing wheel for final edge sharpening and honing.
  • Stainless steel support bar for jigs repositions for horizontal or vertical use.
  • Jigs hold tools and slide along the bar for solid, consistent.
Check Stock

Tormek T-4 Chef’s Kit (Tormek T-4 Original Sharpener + KJ-45 Centering Knife Jig + KJ-140 Wide Centering Knife Jig + SVM-00 Small Knife Holder Jig + SVX-150 Scissor Jig + MH-380) (US Version)

  • This bundle combines the Tormek T-4 water-cooled sharpening system with the jigs trusted by chefs around the world..
  • This Tormek T-4 Chef’s Kit includes all the jigs to keep your kitchen knives and tools sharp. Use the KJ-45 for your knives, the KJ-140 for the longer knives, the SVX-150 for your scissors, and the SVM-00 for small knives. When you are all finished, cover your machine with the MH-380 machine cover to keep it nice and tidy..
  • The Tormek T-4 Original is Tormek’s 8 inch sharpener. It is a low RPM, water-cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: Tormek T-4 Original, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..
Check Stock

Tormek T-4 – Compact Water Cooled Sharpening System for Edge Tools – US Version – English Handbook

  • Complete Water-Cooled Sharpening system for Wood Chisels, Plane Irons, Spoke Shaves, Carving Tools, Lathe Turning Tools, Knives, Axes and most edge tools.
  • Accessories Jigs available to assist you in achieving a better than factory blade edge quickly.
  • Includes complete instruction manual and easy to follow instructional videos for achieving professional tool sharpening results.
  • Dual Grit 1-5/8″ wide Sharpening Stone turns at just 120 RPM to ensure your blade does not overheat and the steel lose its temper.
  • Die Cast Zinc top, Impact resistant ABS plastic, Industrial Quality Motor, Stainless Steel Hardware for long life, backed by 7 year warranty, made in Sweden.
Check Stock

Tormek T-8 Chef’s Kit (Tormek T-8 Original Sharpener + KJ-45 Centering Knife Jig + KJ-140 Wide Centering Knife Jig + SVM-00 Small Knife Holder Jig + SVX-150 Scissor Jig + MH-380) (US Version)

  • This bundle combines the Tormek T-8 water-cooled sharpening system with the jigs trusted by chefs around the world..
  • This Tormek T-8 Chef's Kit includes all the jigs to keep your kitchen knives and tools sharp. Use the KJ-45 for your knives, the KJ-140 for the longer knives, and the SVM-00 for small knives. Also included is the SVX-150 for your scissors. When you are all finished, cover your machine with the MH-380 machine cover to keep it nice and tidy..
  • The Tormek T-8 is Tormek’s most powerful sharpener. It is a low RPM, water cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: Tormek T-8 Original, SE-77 Square Edge Jig, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, TT-50 Truing Tool, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusi....
Check Stock

Tormek T-4 Original - Compact Water Cooled Sharpening System for Knives and Edge Tools - US Version - English Handbook

  • Water-Cooled Sharpening system for Wood Chisels, Plane Irons, Spoke Shaves, Carving Tools, Lathe Turning Tools, Knives, Axes, and most edge tools..
  • Accessories and Jigs available to assist you in achieving a better than factory blade edge quickly.
  • Includes complete instruction manual and easy to follow instructional videos for achieving professional tool sharpening results.
  • Dual Grit 1-5/8″ wide Sharpening Stone turns at just 120 RPMs to ensure your blade does not overheat and the steel lose its temper.
  • Die Cast Zinc top, Impact resistant ABS plastic, Industrial Quality Motor, Stainless Steel Hardware for long life, backed by 8 year WTY (5+3 after registration), made in Sweden.
Check Stock

Tormek T-4 Hand Tool Kit (Tormek T-4 Original + Tormek HTK-806 Hand Tool Kit) - sharpener that includes all the necessary jigs for knives, axes, scissors, and carving tools (US Version)

  • A complete sharpening system for hand tools – this bundle combines the Tormek T-4 water-cooled sharpening system with the HTK-806 hand tool sharpening jig and accessory kit.
  • The HTK-806 hand tool kit includes 6 jigs for sharpening hand tools like knives, scissors, axes, carving tools, and comes with its own storage case.
  • The Tormek T-4 Original is Tormek’s 8 inch sharpener. It is a low RPM, water-cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: WM-200 Angle Master, PA-70 honing compound, SP-650 stone grader, SVM-45 knife jig, SVM-00 small knife jig, SVM-140 long knife jig, SVA-170 axe jig, SVX-150 scissor jig, SVS-38 short tool jig, TC-800 storage case. It’s a sharpening shop in a box!.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..
Check Stock

Sharpening Stone Whetstone Knife Sharpener, G-TING 400/1000 and 3000/8000 Grit Knife Sharpening Kit Wet Stone with Flattening Stone, Angle Guide, Non Slip Bamboo Base for Kitchen Knives, Pocket Knife

  • Easily Extend The Life Of Your Tools – Forget the days of trying to find the correct angle by hand or accidentally tapering the edge of your tools. Chisel sharpening has never been so easy. The ATLIN Honing Guide allows you to easily choose your desired sharpening angle, and consistently achieve the perfect edge on your tools.
  • Instructions Included – Honing jigs can appear deceptively simple, however there is more to them than most people realize. Included with your order are illustrated, step-by-step instructions which detail how to get the perfect edge every time..
  • Choose Your Own Angle – All standard sharpening angles can be achieved using this sharpening jig by adjusting the tool projection. Projection measurements for 25° and 30° angles are conveniently located on the packaging and on the cast aluminum body of the tool.
  • Sizing & Compatibility – Self centering and fully adjustable, this sharpening guide will fit chisels from 1/8” to 1-7/8” in width, and plane irons from 1-3/8” to 3-1/8” in width. Includes flat jaws for clamping mortise chisels, and grooved jaws for clamping paring chisels and planer blades.
  • Built To Last – The ATLIN Honing Tool features a hardened steel roller wheel which will not wear down over time or develop fl....
Check Stock

Work Sharp Guided Field Sharpener

  • ...t backs. Includes (2) glass wheels, (1) slotted Edge-Vision wheel, (2) P120 abrasive discs, (4) P400 abrasive discs, (4) P1000 abrasive discs, (1) 3600 abrasive disc, (1) P80 slotted abrasive discs, (2) P400 slotted abrasive discs, (2) P1200 slotted abrasive discs, (1) tool rest, (1) crepe stick..
  • No jigs required - sharpening port has precise and repeatable bevel angle settings of 20°, 25°, 30° and 35° for chisels and plane irons up to 2" Wide. Achieve a perfect 5° micro-bevel for fast re-honing..
  • Powerful 1/5 HP motor - with 580 rpm speed has routed air flow and a heat sink cooling system to sharpen blades fast without blade damaging heat. This low-rpm wheel maintains speed regardless of load for improved consistency, so whether your specialty is custom furniture, cabinetry, or old-fashioned wooden toys.
  • Accessories available - you can attach a wide variety of standard six-inch, adhesive-backed abrasive disks to these wheels, making it easy to select the grit you need for rough grinding or fine honing. And with two glass wheels, you can always have four different grits ready to go (one on each wheel surface), making it easy to move from task to task..
  • Proud to be an American company - Work Sharp is part of Darex, a 4th-generation family owned....
Check Stock

1x6 ATOMA DIAMOND SHARPENING STONE PLATE 600 Grit-for Edge Pro, Hapstone, and TSProf Sharpener

  • best used after sharpening with the 140 or 400 grits to put a toothy working edge on a knife or tool.
  • use advanced diamond technology designed to cut faster.
  • compatible with any standard JIGS for Knives, Edge Pro, Hapstone, and TSProf Sharpener stone holder, and can also be used as slip stones.
Check Stock

Woodworking T-shirt - Funny Weekend Forecast Sawdust

  • Wear this funny woodworking t-shirt apparel outfit accessory when using woodworker draw knife whetstone wax dust respirator face shield mask collection dial indicator organization protractor hand saw square precision gloves tools scribe set jointer glue.
  • A gift for men women quick bar clamps jigs dividers drill bits lathe workbench release vise vice eye ear protection muff plugs holdfast equipment essentials height angle guage oil burner mallet goggles sharpening stone plans apron rasp awl planer kit rasp.
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

Tormek BGM-100 Bench Grinder Mounting Set - Enables Tormek Woodturning Jigs on a Bench Grinder

  • Allows you to use your bench grinder for shaping with the Tormek sharpening system..
  • Allows you to use Tormek jigs with your bench grinder..
  • With or without Tormek machine you can still benefit from the precise Tormek jig system on your bench grinder and easily get the desired shape and....
  • Includes height adjustable block and hardware for easy mounting to your bench.
  • The principle for setting the shape and edge angle is the same regardless of which machine you use..
Check Stock

Tormek T4 Water Cooled Precision Tool Sharpening System with 8-Inch Stone + SVM-45 Knife Jig Combo

  • Complete Water-Cooled Sharpening system for Wood Chisels, Plane Irons, Spoke Shaves, Carving Tools,.
  • Accessories Jigs available to assist you in achieving a better than factory blade edge quickly Incl.
  • Dual Grit SharpeninStone turns and at just 120 RPM to ensure your blade does not overheat and the.
  • Die Cast Zinc top, Impact resistant ABS plastic, Industrial Quality Motor, Stainless Steel Hardware.
  • The additional Knife Jig willl sharpen and hone most standard knives.
Check Stock