Reviews Taper Shank Boring Bars

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

  • Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • For semi-finishing and finishing operations.
Check Stock

Wisamic 11 Pcs 5/16 inch Carbide Tipped Cutter Set for Metal Lathe Turning, Boring, and Chamfering

  • 2 pieces: 4-7/8" long Cranked Boring Bars.
  • Made of drop forged tool steel with tungsten carbide tips..
  • Can be resharpened & reshaped for many times..
  • Suitable for machining mild steel brass copper and plastics..
  • For metal lathe, mini lathe, milling other general machining operations such as turning & boring..
Check Stock

Accusize Industrial Tools 8 Pc 3/4 Round Shank Indexable Boring Bar Set with Tcmt Carbide Inserts 90 Degree 2627-9108

  • 3/4", .75in Round Shank, 90 Degree, Indexable Boring Bar Set, allowing the operator to set positive or negative rake.
  • Chip breaker eliminates long stringer chips, A new cutting edge may be presented by simply, indexing the insert.
  • It is not necessary to remove tool from chuck or tool post.
  • Positive Rake 90Degree Lead, Uses 0.050" key, C6 grade: carbide for steel and alloy steel.
  • 1/4" I.C. carbide inserts fit all bars, Radius = 0.015", Key = T8, Shank: 3/4", Piece per set: 8.
Check Stock

HSS 1-1/4\ MT3 Taper Shank Drill

  • Size: 42.00mm, Material: High Speed Steel, Finish: Black Oxide, Flute Length: 10-1/8, Overall Length: 17-1/8, Shank Size: 5MT, Shank Type: Taper, Style: Taper Shank, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand.
Check Stock

Qualtech 7/8\ HSS 3MT Taper Shank Drill Bit, DWDTS7/8

  • Size: 3/4, Material: High Speed Steel, Finish: Black Oxide, Flute Length: 5-7/8, Overall Length: 9-3/4, Shank Size: 2MT, Shank Type: Taper, Style: Taper Shank, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand.
Check Stock

Qualtech 1-47/64\ HSS 5MT Taper Shank Drill Bit, DWDTS1-47/64

  • Size: 1-47/64, Material: High Speed Steel, Finish: Black Oxide, Flute Length: 10-1/8, Overall Length: 17-1/8, Shank Size: 5MT, Shank Type: Taper, Style: Taper Shank, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand.
Check Stock

Qualtech 1-1/64\ HSS 3MT Taper Shank Drill Bit, DWDTS1-1/64

  • Size: 1-3/4, Material: High Speed Steel, Finish: Black Oxide, Flute Length: 10-1/8, Overall Length: 17-1/8, Shank Size: 4MT, Shank Type: Taper, Style: Taper Shank, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand.
Check Stock

Drill America 1/2\ Carbide Tipped 2MT Taper Shank Drill Bit, DWDTS Series

  • Size: 25/32, Material: High Speed Steel, Finish: Black Oxide, Flute Length: 6, Overall Length: 9-7/8, Shank Size: 2MT, Shank Type: Taper, Style: Taper Shank, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand.
Check Stock

Qualtech 1-1/32\ HSS 3MT Taper Shank Drill Bit, DWDTS1-1/32

  • Size: 26.00mm, Material: High Speed Steel, Finish: Black Oxide, Flute Length: 6-1/2, Overall Length: 11-1/8, Shank Size: 3MT, Shank Type: Taper, Style: Taper Shank, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand.
Check Stock

LANTRO JS MT1 to MT2 Morse Taper Drill, Taper Drill Sleeve Reducing Adapter for Lathe Milling Industrial Supplies

  • MATERIAL: The taper drill sleeve is made of high-quality high-speed steel, which is hard and not easy to break, bringing you a better experience.
  • QUENCHING: The product has been quenched as a whole, which has higher hardness and wear resistance.
  • POLISHING: The taper bit sleeve is finely polished, and the excellent surface treatment makes it easier to use.
  • APPLICATION: The drill sleeve is specially designed for the use of Morse taper shank and taper shank drill bits.
  • PACKAGE INCLUDED: 1pc MT1‑MT2 Morse Taper Adapter.
Check Stock

Qualtech 42.00mm HSS 5MT Metric Taper Shank Drill Bit, DWDTSMM42.00

  • Size: 2-7/32, Material: High Speed Steel, Finish: Black Oxide, Flute Length: 10-1/4, Overall Length: 17-3/8, Shank Size: 5MT, Shank Type: Taper, Style: Taper Shank, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand.
Check Stock

9pcs 2 Boring Head R8 Shank 1/2 Carbide Boring Bar Set Milling

  • 2" Boring Head With R8 Shank.Head size: 2".Boring bar Hole: 1/2".
  • Cross Hole Dia: 1/2".Maximum Offset: 5/8".Thread: 1.5"-18.Graduations: 0.001/0-50.
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting.
  • Packing including:1pcs 2" Boring Head, 1pcs R8 Shank, 9pcs 1/2" Carbide Boring Bar,3pcs Allen Wrench.
Check Stock

1-1/64\ HSS Extra Long Taper Shank Drill Bit, 24\ OAL, MT3, Michigan Drill Series 124

  • Size: 1-1/2, Material: High Speed Steel, Finish: Black Oxide, Flute Length: 9-3/8, Overall Length: 15, Shank Size: 4MT, Shank Type: Taper, Style: Taper Shank, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand.
Check Stock