Reviews Tank Lorry Flow Meter

Fill-Rite FR711VA Cast Iron 115V AC Fuel Transfer Pump with Discharge Hose, 901-Gallon Meter, and High-Flow Automatic Nozzle, Red

  • HIGH-FLOW FUEL TRANSFER: Rotary vane high-flow fuel transfer pump designed for gas, diesel, and biodiesel.
  • MADE IN THE U.S.A.: High-flow pump features heavy-duty cast iron construction.
  • EASY TO USE: Easy-to-read 4 digit mechanical meter.
  • 30-minute duty cycle with 20GPM flow rate.
  • NOZZLE INCLUDED: Fuel pump with an iron rotor and carbon vanes.
  • includes a 1-inch x 18-foot static wire and high flow automatic nozzle.
  • 1/3 HORSEPOWER: Flow pump with a 901-gallon meter and 1/3 horsepower motor.
Check Stock

STYDDI 3 Feet Low Pressure Propane Regulator and Hose with Propane Tank Gauge, Universal QCC1 Replacement Hose with Regulator for Most LP Gas Grill, Heater and Fire Pit Table, 3/8 Female Flare Nut

  • NO NEED TO BUY EXTRA GAS METER & SAVING YOUR MONEY. This upgraded 3 FT braided low-pressure propane hose and regulator assembly is equipped with tank gauge level indicator, allows you to monitor the fuel level without necessarily removing the tank. The color-coded dial lets you see when your propane gas level is low at a glance without spending more money on extra gas meter..
  • CSA CERTIFICATED & BUILT-IN EXCESS FLOW PROTECTION FOR YOUR SAFETY. CSA certificated ensures secure, airtight connection between grill and tank. When your propane gas left in your tank too low, or the capacity flow of your appliance exceeds this regulator's Max. flow capacity too much, it will shut off the gas flow automatically..
  • EASILY INSTALL WITHOUT A HITCH! Please DOUBLE CHECK your appliance connection is 3/8" MALE FLARE FITTING CONNECTOR. Insert the black plastic fitting and rotate clockwise to your QCC1/Type 1 propane tank connection place. Then connect the regulator hose end connect to your 3/8" male flare connector propane appliance. Its compatible with your 20-50 lb propane gas tank..
  • UNIVERSAL FOR MOST LOW-PRESSURE GAS PROPANE APPLIANCE. QCC1/QCC/Type 1 hose and regulator replacement for Weber Genesis 300-series, Genesis Silver C, Genesis Gold, Genesis Platinum, Spirit E....
Check Stock

Grow Crew Hydroponic CO2 Enrichment Kit | Includes 20 lb Aluminum CO2 Tank Carbon Accelerator C02 Regulator and Active Air Rain System to Shower Your Plants with CO2

  • BUNDLE INCLUDES - 20 lb. Aluminum CO2 Tank (Empty), Carbon Accelerator CO2 Regulator w/ Flow Meter, Active Air CO2 Rain System - 20 ft, 6 eye-screws,1....
  • PERFECT CO2 ENRICHMENT KIT - The C02 Rain System showers your plants with CO2! Just affix the eye screws in the ceiling, slide the black laser drilled....
  • CARBON ACCELERATOR REGULATOR W/ FLOW METER - The CO2 Release Kit provides you with the tools you need for proper CO2 enrichment. The regulator....
  • ACTIVE AIR RAIN SYSTEM - Active Air CO2 Rain System will make it rain CO2 onto your garden to help promote vigorous growth and high yields. This is....
  • 20 LB. ALUMINUM CO2 TANK - The 20 pound aluminum tank is brand new, and perfect for use with our CO2 regulator. Aluminum tanks are about 1/2 the....
Check Stock

Argon CO2 Regulator, Tig Mig Welding Regulator Argon Flow Meter with 6.6Ft Gas Hose CGA-580 Inlet 0-3500PSI Pressure Gauge 10-60 CFH

  • CGA580 CONNECTION - The argon regulator/flowmeter is suitable for standard Gas tanks like argon, CO2, and helium with CGA-580 inlet connection, and has a unique filter port design on the CGA-580 mounting port..
  • PRECISE CONTROL & MEASUREMENT - Our argon CO2 regulator equipped with a flow meter and pressure gauge. Output flow is indicated by a ball in the flow tube and is adjustable from 10 to 60 SCFM (standard cubic feet per minute).The pressure gauge ranges from 0 to 3500 PSI and is used to read the amount of gas remaining in the tank..
  • RELIABLE QUALITY - The bodies of our argon flow meter is made of high-quality brass to withstand harsh environments and have a longer life. The flowmeter tube and protective cover are made of impact-resistant composite material for safety and durability..
  • APPLICATIONS - The gas pressure regulator can be used with argon, CO2 and helium. Ideal for MIG TIG welding, chemical and electronics industry. The welding gas regulator is an economic alternative for the customers who wants more precise gas metering..
  • PACKAGED WITH HOSE - Our argon regulator package comes with a 2m/6.6 Ft hose that will completely protect you from injury in adverse conditions and keep your tank a safe distance from your welding project..
Check Stock

Grow Crew Hydroponic CO2 Enrichment Kit | Includes 20 lb Aluminum CO2 Tank, Carbon Accelerator C02 Regulator, Atlas 7 CO2 PPM Monitor and Active Air Rain System to Shower Your Plants with CO2

  • ✓ BUNDLE INCLUDES - 20 lb. Aluminum CO2 Tank (Empty), Carbon Accelerator CO2 Regulator w/ Flow Meter, Atlas 7 CO2 Monitor, Active Air CO2 Rain System - 20 ft, 6 eye-screws,1 T-Fitting, and a "Legalize Tomatoes" Sticker.
  • ✓ PERFECT CO2 ENRICHMENT KIT - The C02 Rain System showers your plants with CO2! Just affix the eye screws in the ceiling, slide the black laser drilled tubing through the eye screws, attach the plastic tubing from your CO2 Regulator and you've got CO2 raining down on your plants!.
  • ✓ CARBON ACCELERATOR REGULATOR W/ FLOW METER - The CO2 Release Kit provides you with the tools you need for proper CO2 enrichment. The regulator assembly features an industrial-grade 120-volt solenoid valve with 6 ft. power cord, a precise flow-gauge, and easy-to-read pressure gauge. The kit also includes 10 ft of tubing for dispersal, and connects directly to 20 lb. or 50 lb. tanks..
  • ✓ TITAN CONTROLS ATLAS 7 CO2 PPM MONITOR - Select CO2 PPM levels at 1000 PPM, 1250 PPM or 1500 PPM. Integrated photocell. Built-in calibration feature. Single button control. Enclosure resists dust, rust, and moisture. 5 Amps maximum/120 Volts/60 Hz..
  • ✓ 20 LB. ALUMINUM CO2 TANK - The 20 pound aluminum tank is brand new, and perfect for use with our CO2 regulator. Aluminu....
Check Stock

BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

  • Brand New BETOOLL Argon / CO2 regulator and flow meter..
  • Flow Meters are more accurate than the flow gauge regulators..
  • The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi..
  • And this flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators..
  • The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
Check Stock

Tier1 48,000 Grain High Efficiency Digital Whole House Water Softener with Under Sink Reverse Osmosis System - Everyday Series

  • DIGITAL METER HEAD CONTROL VALVE: LCD display, electric plug in, improved features, and ease of operation as compared to Fleck 5600SXT..
  • COMPLETE WATER SOFTENER and 5-STAGE REVERSE OSMOSIS SYSTEMS: Each system includes a brine tank, pre-filled mineral tank with 1.5 cubic feet of Cation....
  • ADDITION OF THE 5-STAGE REVERSE OSMOSIS SYSTEM: The Tier1 RO5 Under Sink Reverse Osmosis System features a continuous water flow and efficient....
  • SCALE REDUCTION: Protects fixtures, pipes, and appliances from harmful scale. Prevents damage from hard minerals such as calcium and magnesium....
  • SMART SPACE SAVING DESIGN: Its unique precision turbine meter is incorporated in the system bypass valve saving over 4 feet of floor space. 10 x 54....
Check Stock

Yeswelder Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

  • Wide Application：Has CGA - 580 Tank fitting so it will screw right into the Argon, Argon/CO2Tanks. Ideal choice for MIG TIG welding, chemical and electronics industry.
  • Accurate Gas Flow Gague：The Square flow tube reads from 0 - 60 CFH, which is indicated by a ball which moves up and down in the flow tube.And has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI. Easy to read, accurate.
  • Multiple Outlet：Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
  • Design：Combination of regulator and flow meter.
  • Two Connection Ways：You can choose the connection method according to your needs.
Check Stock

Horiba 9096001700 Plastic Body PH Electrode

  • Modular design makes it suitable for use with output modules, sensors and remote transmitters.Compact structure, easy to install.Intuitive clear reading, high reliability, measuring accuracy is ±1%.High-definition displays show both instantaneous and cumulative flow.Can be widely used to measure diesel, kerosene, gasoline, etc..
  • This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters..
  • Malfunction and solution:The flow meter is not accurate. 1. The method of field calibration is not correct. Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely..
  • 4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly 6. Too close to the motor or electronic noise environment.
  • The meter can not calibrate. 1. Circuit board is break down. Replace the circuit board. 2. Button is fail to press. Replace the circuit board..
Check Stock

BISupply Heating Torch with 5 Meter Hose – Portable Torch Weed Burner Propane Torch Hose

  • [Built to Last]: Constructed of stainless steel, these weed burners are resistant to rust and corrosion.
  • The torch features a steel jet nozzle and a durable adjusting valve to control the flame size and temperature.
  • This kit also includes a natural rubber 5-meter hose that has a 300 PSI rating and is explosion proof.
  • Designed for use with 20 lb. propane tanks.
  • [Contents]: This propane torch weed burner kit includes (1) 33.5-inch (85.1 cm) Heat Gun with turbo blast trigger handle, flow valve knob, and jet nozzle torch tip, and (1) 15-foot (5 meters) gas torch hose.
  • The natural rubber hose weighs 1.8 lbs. (.8 kg) and is classified as “Class 2 – 6.5mm – Propane/Butane”.
Check Stock

AFWFilters Iron Pro 2 Combination water softener iron filter Fleck 5600SXT digital metered valve 64,000 grain, 64k for whole house

  • Water softener, iron filter, all in one! high flow for whole house use!.
  • 64,000 grain capacity, fine mesh resin designed for high iron removal & long life.
  • Fleck 5600SXT digital metered valve for efficiency and ease of use, 5 year warranty!.
  • Removes hardness up to 75 gpg, Iron up to 6-8 ppm range, Manganese up to 6 ppm, sediment, sand, rust.
  • *tank color may vary*, this comes complete with brine tank, DIY instructions, bypass valveDescriptionChoose the best for hard water and iron removal Eliminates Red Staining from iron Eliminates scale from hard water Removes Manganese Meter Based Regeneration Fleck 5600SXT Digital Control Head 1" Bypass Valve 12"x48" Structural USA Tank* Treats up to 16GPM Special fine mesh resin made to last longer in the presence of iron and filter better! Control Head - 5 year warranty Tank - 10 year warranty 30-day Satisfaction Guarantee DIY Installation Instructions Free Phone and/or email Tech Support Eliminate the hard water that causes scale build up and iron that causes red staining with a single system! Eliminates Scale Buildup - Hard water causes a white flaky build up (called scale) to form on appliances, faucets, and just about anything that it comes in regular contact with. By removing the hard water, this scale build up....
Check Stock

SONNLER Argon/CO2 Regulator Flow Meter Compatible With 6.6FT GAS Hose Welding Gas Regulator For CGA-580 Mig Tig Welder Accessories

  • 【Premium Quality Argon Regulator】SONNLER argon flow gauge regulator made of premium durable brass, can withstand harsh environments and has a longer life, won't rust, won't leak, improve your welding skills..
  • 【Wide Application】Ideal for CGA 580 tank fitting, this gas pressure regulator/flowmeter can be used with argon, helium, and CO2 gas tanks (CGA-580 inlet). It's compatible with Miller, Lincoln, Hobart, and most other TIG welders, apply to welding,cutting, chemical, and electronics industries..
  • 【Accurate& easy to read】Adjustable from 0 to 60 cfh (cubic feet per hour), this argon regulator's gas flow is indicated by a ball that moves up and down in the flow tube. The easy-to-read bottle pressure gauge shows how much gas is left in the tank (range 0 to 4000psi). It fits both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.It also comes with a standard 1/4" barbed fitting ..
  • 【Two Connection Ways】You can choose the connection method according to your needs..
  • 【7*24 after-sales service】You'll receive 1 x Argon/CO2 flow meter gas regulator, 1 x 6.6 ft hose, and a 30-day warranty. If there is a problem, please feel free to contact, we have professional engineers to provide support..
Check Stock

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

  • FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
  • MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
  • HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
  • INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
  • MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..
Check Stock