Reviews T slot Grooving Bars

HFS (R) Heavy Duty Indexable Grooving/Parting Holder with a Gtn-2 Tin Coated Carbide Insert (3/8''-1/2'')

  • For shallow precision grooving and profile/copy turning.
  • O-ring. snap-ring, relief grooving and high production.
  • The head of turning tool is screwed tightly and has high clamping force, which improves the insertion indexing accuracy..
Check Stock

YAKIMA, BigCatch Kayak Fishing Boat Saddles for Roof Racks and Trailers

  • Built for big boats: Specially designed to support the extra weight of fishing and sit-on-top kayaks.
  • 150 lb. capacity - enough for the heaviest fishing kayaks.
  • Full-contact carry: Oversized cradle protects the boat and conforms to a variety of hull shapes.
  • Soft rubber pads protect the kayak from dings and scratches.
  • Easy to install: Simple, tool-free attachment for easy installation, removal, and adjustment.
  • Includes heavy-duty straps and bow and stern tie-towns.
  • Universal mounting hardware: Fits all YAKIMA crossbars, factory bars, aerodynamic bars and aftermarket bars.
  • If you have T-slot crossbars: If your vehicle is outfitted with T-slot crossbars, don't forget the YAKIMA SmarT-Slot Kit 4 (sold separately).
Check Stock

3/8\ Shank Grooving & Cut-Off Tool, High Speed Steel Inserts, A R Warner

  • For external grooving and cut-off operations.
  • Includes two 1/16" (.062") groover T-15 high speed steel inserts.
  • Includes two 1/32" (.031") groover T-15 high speed steel inserts.
  • Includes one 1/64" (.016") groover T-15 high speed steel insert.
  • This lathe grooving tool includes two IS 3007 screws and one T-9 wrench.
Check Stock

OLSON SAW CB50000BL 14-Inch Delta Band Saw Accessory Cool Blocks

  • An innovative feather board design that provides consistent tension and maximum holding pressure created by unique split rail construction.
  • Pre-load tension design maintains consistent pressure across face of the feather board.
  • 2 each of 5/8" And 3/4" Metal miter bars, that fit all standard miter slots and four 1/4" T-track bolts.
  • Mounting hardware included for nearly any dual or tandem application - 3/4-inch and 5/8-inch wide miter bars and T-slot bolts fit most table and band saws, Router tables, and fences.
  • Includes sturdy spacer for tandem Feather Board operations.
  • Dual slide motion - Side to side and forward action for quick and easy setup.
  • Unique pre-load tension Design - quickly set tension for consistent cuts while reducing the chance of kick-back.
  • Split rail miter bar construction - provides maximum hold.
  • Mounting Hardware Included for nearly any dual or tandem application - 3/4-Inch and 5/8-Inch wide miter bars and t-slot bolts fit most table and band saws, router tables, and fences.
  • Includes sturdy spacer for tandem FeatherBoard operations.
  • Dual Slide Motion - Side to side and forward action for quick and easy setup.
  • Unique Pre-Load Tension Design - Quickly set tension for consistent cuts while reducing the chance of kick-back.
Check Stock

POWERTEC 71568 Aluminum Miter T-Track with Miter T-Bar, 32-Inch

  • FUNCTION: The POWERTEC Miter track and bar set is designed to help build an assortment of sliding jigs and fixtures, while enhancing overall bench top table tool precision and functionality..
  • APPLICATIONS: Ideal for benchtop table saws, router tables, band saws, and other woodworking shop projects that require a versatile set of miter track channels.
  • DESIGN: Both anodized aluminum extrusions possess a heavy duty construction, and feature a center guide track perfect for drilling and project alignment - The miter t-bar slides seamlessly into the miter track or t-slot.
  • SIZE SPECIFICATIONS: T-track works with ¾” x 3/8” miter gauges, with or without t-slot plate.
  • t- bars fit perfectly into t-slotted miter gauge slots - The 32" length can be custom cut to suit your individual project requirements.
Check Stock

Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences

  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction.
  • Pre-load tension design maintains consistent pressure across face of the feather board.
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots.
  • Dual Slide Motion-side to side and forward action for quick and easy setup.
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences.
  • Split rail miter bar construction-provides maximum hold.
  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening.
  • All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences.
  • Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back.
Check Stock

HHIP 2301-3108 TNSR08-2V Notch Style External Threading and Grooving Tool Holder

  • Excellent all-purpose system for threading and grooving.
  • Clamping system draws the insert consistently back into the pocket for superior repeatability.
  • Fully interchangeable with other similar "notch" type tools and inserts.
  • Can be used with our right hand notch T/NT-2R #6062-5001 threading and T/NG-2 grooving inserts.
Check Stock

HHIP 3900-5308 Bushing for A Series S Holder 40-Position Tool Post, MT2 Taper, 1-3/16\ Holder Hole Diameter

  • 1. Model : MGIVR2016-2 Right hand Internal Grooving holder / Boring bars.
  • 2. Inserts applied: MGMN200-G (Grooving inserts).Inserts with Nano coating endow them strong impact resistance, good versatility with high precision, high finish and high wear resistance..
  • 3. Shank Diameter: 5/8" inch / 16*16mm, Overall length: 180mm/7.08" , Groove width: MGMN200.
  • 5. Advantage: Suitable for hard steel and stainless steel parts processing. High hardness, good toughness, good wear resistance, heat resistance. Imported base material, high-quality coating.
  • 4. Package includes: 1Pc of MGIVR2016-2 Tool-holder +1PC MGMN200-G Colorful coating insert + Wrench : L.
Check Stock

uxcell T-Slot Milling Cutters 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 6mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 4mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

Hooke Road Overland HD Truck Bed Rack Adjustable Height Aluminum Ladder Rack for Toyota Tundra Tacoma Nissan, Rooftop Tent Carrier Cargo Storage Luggage Organizer

  • 【800 lbs Capacity】 - Maximum on-road rating of 800 lbs. Maximum off-road rating of 500 lbs. Carries luggage from snowboards, kayaks, surfboards, bikes, rooftop tents, lumber, and more.
  • 【Secure Your Load】 - T-Slot Attachments make adding gear mounts and accessories fast and simple. Accepts T-Slot accessories like Eye Bolts, Recovery Track Mounts, RotoPax Mounts, and Tool Holder(Not included). Integrated Tie Down Points that allow you to secure your load with ratchet straps or bungees. Integrated SKS (Same Key System) locks to secure your rack system to the truck bed.
  • 【Reinforced Structure】 - Heavy-duty aluminum alloy construction and durable textured black powder-coat finish. Reinforced structure with 4 adjustable bed side bars. Each side is equipped with 2 side bars and creates the ultimate truck bed cargo management system by adding these telescoping bars. Product Weight about 88 lbs.
  • 【Adjustable Bars】 - Adjustable height to create custom set-ups for maximum utility and versatility. Adjustable height from 18.7" - 23.5", adjustable side bars....
Check Stock

18” Precision Steel Miter Bar Rail Runner with Adjustable Spring Loaded Plungers For DIY Table Saw Crosscut Sleds, Jigs and Fixtures to Slide in 3/4 inch by 3/8 inch Miter Slots

  • Build your next table saw sled, router table jig or band saw fixture to operate with a smooth sliding action using the Fulton 18 inch Precision Steel Miter Bar! Attach the steel bar to most any type of sled, jig or fixture that is to be used with a 3/4 inch (19mm) by 3/8 inch (9mm) miter slot. Using our steel bar versus plastic or aluminum gives your sled, jig or fixture more strength and stability and it won’t bend or warp..
  • When building sleds, jigs and fixtures one of the most important aspects is to achieve a smooth sliding action without side to side play. The Fulton Precision Steel Miter Bar does both with its solid steel bar and 4 adjustable spring loaded plungers. The plungers can be adjusted with the included hex key wrench for just the right fit..
  • Not only is the Fulton Steel Miter Bar adjustable, its easy to mount! You can mount the bar from the top of your sled, jig or fixture platform or base, or you can mount it from the bottom. There are three threaded holes along the length of the bar for mounting the bar using 1/4 inch by 20 tpi machine screws (not included). There are also three counter sunk holes on the bar to mount the bar using #8 wood screws (not included)..
  • Once you mount the bars to your sled, jig or fixture you are sure to fee....
Check Stock