Reviews T handle Clamp

Peachtree Woodworking Supply 2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. Ideal For Woodworkers and Cabinet and Furniture Makers

  • ...s Apply Pressure From The Top And Bottom Of The Panels During Glue Up. In Fact, With All The Pressure Being Applied On Both Sides, Bar And Pipe Clamps Will Almost Certainly Bow, Buckle Or Rack Your Panel Glue Up Project.
  • Let’S Make Racked Panel Glue Ups A Thing Of The Past. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time.
  • Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock.
  • Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6” Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2’S (2” X 4” Ripped In Half) With The The Wood Screws That Are Provided, Apply Wood Glue To Your Project, Set The Clamps On To Your Panel Boards And Turn Handle To Tighten The Clamp On All Four Sides. We Recommend That You Place A 4 Way Pressure Clam....
Check Stock

Rockler 52” to 104” Low Profile Straight Edge Clamps for Woodworking w/ Extension Tool, 4 Screws, Nuts, & Bolts - 2 Straight Cut T Track Clamp & Handle for Router or Circular Saw Guide

  • Straight Edge Tool Rockler Clamp System: Make your workshop more versatile with our wood cutter hold down clamp. Get arrow-straight cuts with this straight edge wood cutting equipment. The clamp system comes with 2 clamps, a handle, & an extension tool to join the panel and cut large wood. Connect two 52” sections to create a 104” large straight edge..
  • Versatile Uses: The easy assembled cutting straight edge clamp guide works efficiently to cut plywood, timber, and others..
  • Easy to Use: The straight edge clamps slide along an integral T-track to accommodate nearly any size of material..
  • Premium Build: The straight edge clamp is made with durable construction material to withstand the weight of wood in the workshops..
  • What’s Included: This straight edge clamp kit includes (1) Rockler 52” to 104” low profile straight edge system (1) pair of straight line clamps, (1) handle (1) extension tool. The T track system greatly works when you cut the large wood..
Check Stock

Cimeton 11Pcs Hose Clamp Pliers Set Including 3Pcs Hose Clamp Pliers, 1Pc Car Water Pipe Locking Pliers and 6Pcs Hose Removal Hooks Set for Hose Installations

  • ✅ [High Quality Material]: This hose clamp pliers set are made of heavy duty carbon steel and firm handles, you don’t need to worry about hose clamp pliers will damage your hoses. It is professional hose clamp pliers set and easy to dismantle flat or ring hose clamps..
  • ✅ [What You Can Get]: You can get 3pcs hose pinch pliers, 1pc water pipe hose clamp pliers and tool box, 6pcs hose removal hooks with different sizes and types, totally 11pcs. It is a complete hose clamp pliers kit and you don’t need to buy others..
  • ✅[Hose Clamp Pliers Set]: Our o shape hose clamp pliers is flat, it is easy to get into those tight spaces and complete the job. Tips swivel can allow access in confined areas and be used at any angle. And three sizes hose pinch pliers can meet your different needs. Special buckle design makes it can be caught by a safety buckle according to the size of the clamp. Our hose pinch pliers can prevent most liquids from getting dirty and prevent air from escaping..
  • ✅ [With 2Pcs Hose Removal Hook Set]: This kit included a U type and V type hose removal hook with red handle. It can be installed between various fittings and hoses. It is essential tool for fixing CV boots and flattens clamps on ear type CV joint boot clamps..
Check Stock

Bora NGX 6-Piece Premier Set, Straight Cutting Saw Guide Accessories for Circular Saw, 544600K

  • Includes: 50-inch NGX clamp edge, 50-inch NGX Extension with connectors, Saw Plate, 2 rolls of non-chip strip, 2 Track Clamps, T-Square Accessory.
  • Clamping end on straight edge moves with handle for easy adjustability from one side.
  • Locking handle grabs work surfaces for secure grip that won’t budge.
  • Includes 50” Clamp Edge and 50” extension for 100” cutting capacity.
  • Made of heavy-gauge, rigid aluminum for extreme durability.
Check Stock

PONY Malleable Iron C-Clamp Set, 3-Piece, (1\

  • [Clamp Set]: 3pc mini pony C-clamp / G-clamp constructed by iron casting for strength and toughness.
  • [Dimensions]: 1-inch c clamp: 1-inch jaw opening & 1-inch throat depth.
  • 2-inch c clamp: 2-inch jaw opening & 1-inch throat depth.
  • 3-inch c clamp: 3-inch jaw opening & 2-inch throat depth.
  • [Characteristics]: Bright Pony Orange Gloss Finish prevents the clamp from corrosion and rust for added longevity. Moveable parts with zinc-plated surface for rust resistance.
  • [Comfort Of Use]: Sliding T-handle offers suitable maximum torque in order to reduce hand fatigue, flexible and smooth threaded rods without stick during use.
  • [Range Of Application]: Ideal for wide range of applications as crafting, painting, sculpting, masonry, metalwork, photography, DIY and so on.
Check Stock

TOUGHER Vertical Plate Clamp, 2200lbs/1T Plate Lifting Clamp Jaw Opening up to 0.8 inch, for Lifting and Transporting

  • ▲TOUGHER Metal Plate Lifting Clamp Dimension: 8.66''x4.92''x1.96''.2200lbs Working Load Limit, Jaw Opening up to 0.8"..
  • ▲TOUGHER Vertical Plate Clamp is built by durable steel and the Blue safety coating for surface protection, which can withstand the harsh environment, ensuring longevity..
  • ▲TOUGHER vertical clamp with a powerful clamping jaw can lock tightly the steel plates of varying thickness using a hand lever. Moving the handle upward is clamping the steel plate. Otherwise, move it downwards to loosen the steel plate..
  • ▲TOUGHER lifting clamp features a safety spring mechanism that ensures the clamp won’t slip when lifting or lowering a load, and 180° rotation hook-up design enables easy positioning of the clamp as you need..
  • ▲It is suitable for heavy lifting or transportation of steel plates and metal sheets. It can be used for steel structure installation, steel market, machine processing, steel plate welding, cutting, and handling..
Check Stock

Wideskall® 15 Pieces Heavy Duty Malleable C Clamp Set

  • Heavy-duty malleable steel frames with durable baked finishes.
  • Nickel plated steel screws with swivel pads.
Check Stock

Jiayouy 15 Pieces Violin Repairing Maintenance Tool Kit with Carry Bag Luthier Tools Violin Making Violin maintenance and violin making tool kit

  • Package content: 1* Peg Reels Shaver, 1* Edge Clamp Cracks Repair Tool , 3* Cam Clamp, 1* Bridge Clamp, 1* 5-16mm T - Handle Reamer 2* Bridges Reference Tool, 3 * Brass Violin Sound Post Setting, 2* 440hz +523hz Tuning Fork, 1* Fret Sanding Pen..
  • Violin Peg Reels Shaver with 4 reamer peg hole for 1/8 1/4 1/2 3/4 - 4/4 size violin peg..
  • Professional edge clamp for repairing cracks close to the edges of musical inrument. Violin Bridge Machine clamp helps fitting a bridge's feet to the violin / viola..
  • Come with a handy carrying case, zipper and handle design, easy to open and carry. No need to worry about missing small parts or messy Violin repair tools!.
  • The maintenance kit can help complete the most common Violin repairs and adjustments.Necessary tool for Violin lovers or maker..
Check Stock

PONY 2-Piece 90 Degree Corner Clamp Set Featured with 3’’ Maximum Opening 200 lbs Clamping Force & 1/2’’ Clamping Height Aluminum Alloy Body Adjustable Right Angle Clamps for Multiple Projects

  • What includes: 2 pieces strongly built 90 degree right angles with 3’’ maximum opening, clamping force ≤ 200 lbs, clamping height > 1/2 in.
  • Strong structure: Made of high-quality aluminum alloy, ensures toughness and durability, clamp various materials stably, anti-rusting and ensure....
  • Labor-saving T handle: Sliding and flexible T-shaped single handle with adjustable rotary jaw to clamp work pieces so much easier. Solid and non-slip,....
  • Securing mounting holes: Each clamp constructed two countersunk mounting holes for the purpose of permanent installation on the bench, making your....
  • Wide applications: Applicable to reinforced connection for woodworking, picture frame, furniture, cabinets and so on. Two wood block of different....
Check Stock

4 Inch Heavy Duty Malleable C Clamps for Woodworking Welding Automotive Carpentry Building 4 Pack

  • 4 Inch C Clamp: Use this set of 4 c clamps for woodworking, metal work, welding, automotive, or furniture manufacturing.
  • Multi-Use: The welding face clamp has a sliding handle that will help reduce hand fatigue while ensuring a strong, secure hold on any wood and metals.
  • Clamping Range: Our c clamp set features a screw and thread design that allows you to freely control the clamping range to your needs.
  • Dimensions: Each 4 inch c clamp measures 8 x 4 x 0.6 inches in length.
  • Reliable Quality: The black c clamps for metal working are made from malleable iron that won’t easily break after long-term use.
Check Stock

NICEYRIG Rosette Leather Handles with 15mm Rod Clamp Connector for 15mm DSLR Camera Shoulder Rig Support System

  • The camera handle kit with rosette is compatible with 15mm shoulder pad rig rod support system. More stable for 15mm shoulder rig system..
  • The rosette (M6 Thread Diameter 31.8mm) on the handle is replacement for ARRI rosette. The length of the handle is 145mm (5.7inch )..
  • The spacing of the dual 15mm rod clamp between the 15mm holes is 60mm fitting standard equipment..
  • The wingnut on the handle and 15mm rod clamp loads spring. You could pull it outside if you don't have a space to rotate..
  • Made of anodized aluminum alloy and cow leather, durable, soft, comfortable and lightweight..
Check Stock

POWERTEC 71410 Quick Screw Guide Rail Clamp for MFT Table and Guide Rail System, 5-3/8” Capacity x 2-3/8” Throat Depth – 2 Pack

  • INCLUDES: (2) quick screw down Clamps with 5-3/8" Max opening, 2-3/8" Throat depth.
  • PREMIUM DESIGN: features High quality and ergonomic plastic clamp handle grips for quick and comfortable tightening, without the splinters from cheap wood.
  • The steel pressure pads are completed with removable non marring plastic.
  • SUPERIOR CLAMPING FORCE: delivers consistently secure placement and safe Clamp action for a seamless workflow.
  • VERSATILITY: These rail clamps provide a portable clamping option for Festool, Makita, POWERTEC 71572/ 71573 track saw guide rails and similar sized track saw guides, perfect as MFT clamps for your homemade workbench, and fits in some heavy duty T-slots (see image for size).
  • PLEASE NOTE: The clamp ends have a specific profile, see the image for details. They are designed to work with MFT tables, the track saw guides listed and some heavy duty t-tracks with an opening of at least 9/32”. They will not work in universal or ¼” t-track. Please check the size of your t-track to verify that the clamps will work for your application..
Check Stock

DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50in / 127cm – Circular, Rotary, Jig, Router

  • ....1” x 0.5” inches (147cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp.
  • BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling.
  • Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory.
  • When clamped, this solid guide shows no play and it tightly holds its grip.
  • WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 50 inches/127cm.
  • T-track on guide accepts standard accessories including all Pro Grip accessories and also allows complete flexibility when designing specialty fixtures in your shop.
  • Low profile and flat top easy on a rotary saw, jig saw, circular table saw, router straight cut, or joiner cut.
  • EASY TO USE: There are two clamps that hold the wood – a stationery clamp on the end with lever and a sliding clamp that moves along the rail.
  • To adjust, pull the sliding clamp apart until you hear a click, adjust the clamp to the wood, hold the clamp against the wood and push the other part of the clamp towards the wood until it locks, make sure the stationar....
Check Stock