Reviews Clamp Or Auto Clamp

Tenma 72-7228 True RMS Compact Clamp Meter

  • 【Reliable Clamp Multimeter with True RMS】Accurate AC/DC voltage current, resistance, capacitance, frequency, temperature, diode, continuity test and non-contact AC voltage detection, the Clamp Meter is fully functional and easy to use for labs factories radio-technology and household..
  • 【Auto-Ranging with NVC】The meter will automatically select the appropriate auto range.
  • NCV detects the existence of AC voltage on conductors and cables in-wall, troubleshooting electrical problems in a safe and user-friendly way.
  • 【Clamp Measuring】Clamp jaw measures AC current up to 28mm without interrupting the circuit, which makes it much safer to use on mains cables and high current loads in vehicles.
  • 【Continuity Test & Overload Protection】 Designed to Safely and Accurately Confirm the Circuit Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire..
  • 【Features】high resolution, large backlit LCD screen and clamp light to improve visibility in dark place. Low battery display and automatic power off after 15 minutes inactivity. A soft zippered pouch included keeps everything neatly together and organized.
  • portable to carry and use. Widely used in your life..
Check Stock

OWON Current Clamp Meter Multimeter CP-05+ Clamp Current Probe 200KHz 400A for Oscilloscope 4A 40A 200A 200-400A Test Range with BNC Connector

  • ¡¾High Performance¡¿The current clamp can take accurate current readings .The current clamps are the ideal tools to extend the current ranges of Oscilloscope tools.Support Auto zero at power on, relative zero correction function.It has Band wide up to 200KHz,support low battery indication .Adopt of amorphous alloy core, with high performance, low loss ..
  • ¡¾BNC connector¡¿The current clamp Multimeter features a BNC connector and can be plugged directly use. After connected well, switch the current clamp on (power LED should light) and then clamp the jaws around the current carrying conductor as shown. Typical Uses The AC/DC Current Probe simply offers the best value for money without compromising resolution..
  • ¡¾Multiple Test Ranges¡¿The OWON CP-05+ current clamp is ideal for use with automotive oscilloscopes for measuring currents between 1 mA and 400 A. Various current test range, 4A, 40A, 200A, 200-400A test range are available.Low noise level, and high detection accuracy..
  • ¡¾Easy to Use¡¿The current clamp has range selection settings, set by a slider switch on the handle of the probe. In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No ele....
Check Stock

DCT C Clamps for Woodworking Welding Clamps Locking Pliers Set 3-Piece Wood Clamp Set 11in and 6in Swivel Tip

  • LOCK & HOLD YOUR PROJECT: Use the DCT | 3-Piece Hand Tools C Clamp Set to grip your project without slippage.
  • This locking C clamp set includes 1 clamp with regular pads and 2 clamps with swivel pads for damage-free automotive work with auto body panels, most home improvement and repair, woodworking wood joints projects, and some welding applications.
  • 3 CLAMPS, 2 SIZES: 11-inch clamp with swivel pad tips for securing medium to large work, approximate 1-inch (2.5cm) maximum opening, 0.9-inch x 1.1-inch (2.3cm x 2.8cm) flat clamp face size.
  • 6-inch clamp with swivel pad tips for small to medium pieces, approximate 0.7-inch (1.7cm) maximum opening, 0.7-inch x 0.8-inch (1.8cm x 2cm) flat clamp face size.
  • 6-inch clamp with regular tips, approximate 1.3-inch (3.2cm) maximum opening, 0.4-inch x 0.3-inch (0.9cm x 0.7cm) rounded clamp face size.
  • BUILT TO LAST: Constructed from nickel-plated carbon steel for maximum strength and longevity.
  • Hex key adjustment screw for adjusting to the correct pressure.
  • Classic guarded trigger release for maximum locking force and keeps pliers locked securely.
  • Unlike other C-type clamps, these C clamp locking pliers are designed with the handle opposite the clamp to allow access to tight spaces.
Check Stock

Rejuvenation

  • 【High Performance】AVID POWER auto-ranging 6000 counts digital clamp multimeter is ideal for accurate measurement of AC/DC voltage, AC/DC current,....
  • 【Multifunction】This AMP clamp meter features NCV testing and detecting function with backlight alarm, Auto power off, Low battery indication, Data....
  • 【Safety Compliance】Meeting IEC 61010-1, CAT. III 600V, CE standard. High Voltage Protection.
  • 【Easy to Use】You can measure current by clamping the meter around one of the wires(be sure not the whole power cord, otherwise the multimeter....
  • 【What You Would Get】1*Durable Clamp Multimeter, 2*Probe Pens, 1*K Thermocouple, 2*1.5 V Batteries, 1*Tool Bag, 1*English User Manual and 24H....
Check Stock

Conair Double Ceramic Curling Wand, 1 Inch Curling Wand, White / Rose Gold

  • 1” Curling Wand: Instantly create free-flowing beachy waves by wrapping your hair around this clamp free curling wand to make a variety of twisted spirals with no kinks or creases. Recessed buttons prevent accidental shutoff.
  • Double Ceramic: This curling wand delivers even heat, fast styling, and long lasting waves. It boasts 30 heat settings with instant heat up to 400 degree F, Turbo Heat boost for difficult to style spots, plus cool tip for safe, easy handling and Auto Off..
  • Clamp Free Waves: Conical barrel creates loose, natural, beachy curls and waves. Style instantly with no clamp, simply wrap. Clamp-free curling puts less stress on hair and reduces damage..
  • Innovative Styling Tools: From curling irons and wands to flat irons, hot air brushes, auto-curlers and more, Conair makes high-quality styling tools for all hair types..
  • Conair Hair Care: Since 1959, we have made innovative small appliances, hair styling tools, and more. Our hair care line includes high-quality hair dryers, brushes, styling tools, and hair accessories..
Check Stock

BTMETER BT-7200APP TRMS 6000 Counts Clamp Multimeter, Digital Clamp-on Ammeter for AC/DC Current Voltage Resistance Capacitor Frequency Continuity Temperature NCV Meter

  • ⚡【Monitoring on Your Phone】Smart clamp-on multi tester BT-7200APP can auto connect to your Android / Apple phones or tablet with ease, allows you viewing logging the data out of the arc flash zone 15m (50 ft) away, and save the measurement for detailed analysis, sharing later..
  • ⚡【AC DC Clamp Amp Voltmeter w/ NCV】This clamp multitester can accurately measure AC/DC Amperage, AC/DC Voltage, Resistance, Frequency or Duty Cycle, Capacitance and also provides Noncontact AC Voltage(NCV) detection, Diode, Continuity Buzzer and Temperature(℃/℉) tests. Easy to use in non-contact ampere measures, troubleshoot electrical problems in , motors, household appliances, HVAC.
  • ⚡【Continuous Data Logging Clamp DMM】This clamp-on meter can displays AC DC amps, volts, ohms, Cap, Hz Temp in Max/Min on the same interface with real-time reading. The curve graph w/ timing will show you the changes of amp volt flow more visually. Also supports adjustable data logging rates for continuous testing/ recording unless the battery is dead or the memory is full..
  • ⚡【Reliable True RMS Voltage Amperage Meter】0.1 amp resolution for 0.1....
Check Stock

Digital Clamp Meter Multimeter AP-7200A True RMS Clamp Multimeter 1999 Counts for Measure DC AC Voltage Current Resistance Diode Test with NCV Continuity Buzzer Data Hold Backlight

  • 【True RMS Clamp Multimeter】The AC voltage and current measurement of AP-7200A clamp meter is true RMS measurement, which is more accurate for....
  • 【Non Contact Voltage Detection (NCV)】With the NCV function of AP-7200A multimeter, you can easily detect and know if there is electricity in the....
  • 【Multi-function Auto Range Clamp Meter】This portable clamp meter supports auto ranging, flashlight, function selection dial, data hold, Max/Min....
  • 【Wide Applications】The clamp tester is compact, easy to operate, convenient to carry and low power consumption. It is ideal to be used in car....
  • 【100% Satisfied After-Sales】AOPUTTRIVER provides 2 years product warranty and lifetime tech supports. Please don’t be hesitate to contact us if....
Check Stock

ZIPCCI Hose Clamp 25 Pack Stainless Steel Worm Gear fuel line hose clamps 16-25mm 5/8-1 inch

  • Package includes: 25 pieces 3/4 inch hose clamps..
  • Hose clamp clamping range from 16 to 25mm (5/8 to 1 inch).
  • 304 Stainless steel hose clamp provides maximum corrosion resistance to salt and most chemicals..
  • Adjustable style hose clamp for a variety of applications for marine, auto, water pipes, fuel lines, etc...
  • Use a screwdriver to tighten or loosen the screw of hose clips then adjust the size, Secures pipe clamp tightly in place..
Check Stock

Yescom PEX One Hand Cinch Clamp Tool Ratchet Clamping Pinch Wrench Crimper 3/8″ to 1″ Stainless Steel Pinch Clamp ASTM

  • [Great Compatibility]: PEX cinch clamp tool kit meets the ASTM F2098 standard and includes 1pc cinch clamp tool, 1pc Allen key, 1pc calibration tool for creating secure stainless steel clamp connection with PEX fittings in PEX piping system.
  • suitable for cinch clamp size ranging from 3/8″ to 1″.
  • [One Hand Ratchet Design]: Ratcheting design reduces incorrect connections, easy to turn the release button for auto-releasing the ratchet, clamp tool will not release from the clamp ring unless the connection has been made, perfect for saving labor and operating the tool with one hand.
  • [Easy to Use]: LED indicator on the tool for helping to check the connection is completed or not, LED light comes on when the clamp is fully engaged, great for ensuring the connection is proper and secured.
  • [Durable & Ergonomic]: Hardened carbon steel construction for ensuring reliability and durability, suitable for long time use.
  • handles with rubber grip for comfortable holding and reducing fatigue, accommodate gloved and bare hands.
  • [Calibration & Wide Application]: Allen key for adjusting the jaw gap and calibration gauge with 1.4mm side and 1.2mm side for measuring the jaw space.
  • widely used for using in tight space such as PEX tubing connection, plumbing, manifold instal....
Check Stock

JOIKIT 3PCS 18 Inch C-Clamp Locking Pliers, Welding Pliers, C-Clamp with Swivel Pads, Vise Grip C-Clamp for Carpentry, Welding, Electrical Equipment

  • Made from nickel-plated alloy steel to withstand corrosive working environments..
  • Screw adjustable locks with trigger release..
  • 3.25” Opening capacity jaws, Clamp wood joints, and auto body panels while avoiding damage..
  • C-Clamp is the perfect tool to clasp any material whatever their shape or size. Its 11-inch locking feature is a reliable choice for home or workshop projects. Its compact design is also great for toolkits for the traveling craftsman..
  • Package Includes:1 x 6 Inch Locking C-Clamp Pliers, 1 x 9 Inch Locking C-Clamp Pliers, 1 x 10 Inch Locking C-Clamp Pliers, 1 x Storage Bag..
Check Stock

XtremepowerUS 5 Ton 2 Way Auto Body Clamp for Top & Straight Repair Tool Kit Self-Tightening Frame Pull Clamp Grips

  • Two-Way Pull Operation - The auto body repair pull clamp is compact, lightweight & exquisitely crafted, allows for two-way (Top & Straight) pull operation, capacity up to 5 tons (Straight Pulling) and 3 tons (top pulling).
  • Easy and Simple to Use - Self-tightening serrated jaws allow for a positive grip, both sides jaws with reasonable designed, which are different in order to fit the confined room.
  • Labor Saving Pull Clamp - The 2 Way self-tightening pull clamp can achieve a positive grip, and drop forged construction provides more pulling power, making it time and labor saving in the process of body repair for automotive car vehicle.
  • Heavy Duty Construction - Made of premium steel for high strength and durability, ensures long last using, this 5 ton 2 way pull clamp is specially designed for car body repair, especially use in narrow place.
  • Ideal Pull Clamp - Self-Tightening. The 2-way clamp will grabs minimum 1-1/2" of metal, making it ideal for hard pulls on heavy metal or frame.
Check Stock

Klein Tools CL120 Digital Clamp Meter Auto-Ranging 400 Amp AC AC/DC Voltage Resistance Continuity Non-Contact Voltage Tester Detection

  • Clamp Meter measures AC current and NCVT via clamp and AC/DC voltage, resistance and continuity via test-leads.
  • Non-contact voltage tester integrated into the clamp jaw.
  • Backlit LCD for ease of viewing in low light.
  • Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands-free operation.
Check Stock

ZIPCCI Hose Clamp, 2 Inch Stainless Steel Worm Gear fuel line clamps for Water Pipe, Automotive and Mechanical Application, 40-63mm (10 Pack)

  • Package includes: 10 pieces 2 inch hose clamps..
  • Hose clamp clamping range from 40 to 63 mm (1-5/8 to 2-1/2 inch).
  • 304 Stainless steel hose clamp provides maximum corrosion resistance to salt and most chemicals..
  • Adjustable style hose clamp for a variety of applications for marine, auto, water pipes, fuel lines, etc...
  • Use a screwdriver to tighten or loosen the screw of hose clips then adjust the size, Secures pipe clamp tightly in place..
Check Stock