Reviews T Slot Bolts 20

DCT 5 Star Knobs Kit 1/4in-20 Threaded Knob Bolt with Knob Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch).
  • Bolts and washers are 1/4”-20 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includ....
Check Stock

T Slot Bolts for Thule Yakima Roof Rack Cross Bars Platform Cargo Basket Stainless M6 / M8 x 30mm/35mm/65mm Square T Track Bolt Adapter to Secure Bike/Ski/Kayak Rack Solar Panel Awning

  • Versatile t Track Bolts - this t-track adapter accessory kit is a great solution to attach items firmly to your t track crossbar, compatible with Thule, Yakima, Whispbar cross bar with t slot, perfect t-track adapter accessory kit to attach bike rack / ski rack / kayak rack, roof rack awning, solar panel, fishing rod holder, cargo box to roof rack cross bars, roof rack cargo basket, car rooftop platform or side rails, works well with most solar panel mounting brackets.
  • Technical Specification - the t bolt is made of 304 solid stainless steel, 79 in x 0.79 in x 0.16 in (20mm x 20mm x 4mm) square head base, m6 / m8 threading, 30m / 35mm / 65mm length.
  • Easy to Set Up - no drilling, cleaner look, just need to slide it into the t slot of your roof bar, and won't scratch your cross bar, great alternative to roof rack t track clamp*NOTE-please check the dimension of your cross bar rail, this t bolts base is 20mm x 20mm x 4mm (L x W x Thickness)*.
  • Marine Resistant - stamping t slot accessories, more durable compared with welding parts, made of solid 304 stainless steel, it features rust resistant and corrosion resistant even in salt water, designed for most harsh environment, perfect t track accessories for suv / rv roof top.
Check Stock

MakerBeam 25 Pieces T-Slot Nuts inc Screws (MakerBeam is 10x10mm in Diameter).

  • 1 bag T-slot nuts contains 25 T-slot nuts for MakerBeam (10mmx10mm) , 25 bolts ISO7380, M3, 4mm, A2 and 25 bolts DIN7991, M3, 4mm, A2.
  • All MakerBeam elements can be combined and reused (no welding required) enabling shorter design and assembly times.
  • T-slot nut is great to fasten brackets or corner cubes. Not compatible with MakerBeam XL (15x15mm in diameter). There are special T-slot nuts for MakerBeam XL (15x15mm) available..
Check Stock

10Sets Black 2020 Series Aluminum Profile Connector Set, 10pcs Corner Bracket, 20pcs T Nuts and Hex Screw Bolt for Slot 6mm 20S Aluminum Rail Accessories

  • Used on 20mm x 20mm, 10 series (1” x 1“ ) extrusion profile, Package content: 10pcs 20mm 90 degree solid cast aluminum corner bracket, 20pcs carbon steel galvanized M5 T-slot nuts, 20pcs black M5x8mm hex socket cap screw bolt..
  • 2020 series aluminum profile connector set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects..
  • Aluminum corner bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 series aluminum profile extrusion..
  • Carbon steel hex socket button head bolts screws nuts surface chrome finish Anti-corrosion,rustless,non-pollution..
  • T-Slot aluminum extrusion M5x8mm hardware slide in T-Nuts made from high quality carbon steel galvanized..
Check Stock

3030 Series Aluminum Profile Connector Set, 20pcs Corner Bracket, 40pcs M6 T Nuts and M6X10 Hex Screw Bolt for 30S 30x30 Aluminum Extrusion Profiles Rail Accessories

  • 3030 Aluminum Extrusion Aluminum Profiles Brackets Set, 20pcs 3030 Corner Brackets Connector, 40pcs M6 T-Nuts and 40pcs M6 Hex Screw Bolt for T Slot Rail 8mm T/V Slot 30mm Series Aluminum Rail Accessories.
  • 3030 series aluminum extrusion connector set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
  • 40pcs M6 t slot nuts and bolts: 40pcs carbon steel galvanized M6 x 10mm t-slot nuts, 40pcs stainless steel M6 x 10mm hex socket cap screw bolt.
  • Aluminum extrusion t bracket used to connect pieces of 30mm aluminum extrusion at a 90 degree angle suitable for most of metric 30 series aluminum profile extrusion.
  • T-slot aluminum extrusion rail M6x10mm drop in T-Nuts, It can be positioned at any position of the profile instead of sliding in at the end, which is more convenient to use.
Check Stock

20Sets Black 2020 Series Aluminum Profile Connector Set, 20pcs Corner Bracket, 40pcs T Nuts and Hex Screw Bolt for Slot 6mm 20S Aluminum Rail Accessories

  • 2020 Series Aluminum Profile Connector Set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects..
  • Package Content: 20pcs 20mm 90 Degree Solid Cast Aluminum Corner Bracket,40pcs Carbon Steel Galvanized M5 x 10mm T-slot Nuts, 40pcs Carbon steel M5x10mm Hex Socket Cap Screw Bolt, 1 piece wrench..
  • Aluminum Corner Bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 Series Aluminum Profile Extrusion..
  • Hex Socket Button Head Bolts Screws Nuts Surface chrome finish Anti-corrosion,rustless,non-pollution..
  • T-Slot Aluminum Extrusion M5x10mm Hardware Slide In T-Nuts made from high quality carbon steel Galvanized..
Check Stock

Bed Deck Rails Stainless Cleat T Slot Nuts Fits Screws with 6PCS 3/8-16 Thread,3/8-16 x 1 Hex Head Bolts,Tie Down Anchors Rings Trailers Hook Cargo Bolt and Carabiner Clip for Toyota Tundra & Tacoma

  • High quality material: T-slot nuts are made of 100% 304 stainless steel for optimum corrosion resistance and to protect the T-slot nuts from rusting. Used for 3/8"-16 threads for d-rings, racks, tie-downs, custom cleats, etc. Hexagon head bolts are made of 304 stainless steel. v-tie-anchors are made of high quality steel, fully welded to the triangle ring, making the bolts strong and work for a long time. With Carabiner Clip for fast tying of goods..
  • Versatile: These T slot truck nuts, screws, etc. are not only suitable for fixing elastic ropes, ratchet ropes, cam buckle belts and more,but also for assembling additional custom cleats, tie-downs, bike racks and various other items.
  • Package Includes:T Slot Nuts with 3/8"-16 Thread 6 PCS,3/8-16 X 1" Hex Head Bolts 6 PCS,Tie Down Anchors 6 PCS,Carabiner Clip 6 PCS and Hexagonal wrench 1PCS .T-slot nuts are tapped all the way through allowing for the bolt to pass all the way through,simple to use and convenient to connect aluminum profiles to other parts..
  • Valid: These T-slot nuts are perfectly compatible with the bed rails in the Toyota Tundra (TM) and Toyota Tacoma (TM), but will also fit a variety of other pickup trucks with compatible bed rails. By inserting a screw or bolt through the 13/32" diameter bo....
Check Stock

POWERTEC 71614 Miter T Locking Bolts Improved Flange Bolt & T-Bolt Accessory for 3/4 x 3/8 Miter Gauge Slots on Table Saws Router Table & Unisaw to Mount Feather Boards and Jigs 10PK

  • FUNCTION: When utilized with t-slotted miter slots, these woodworking tools hold workstock in place for positioning and fixturing for a wide range of applications or any type of jig to your table saw, router table, or any tool with a standard 3/4" x 3/8" miter gauge slot.
  • CLAMP ACTION: Clamping action is greatly improved over competitive miter track slot fixture hardware kits. Locking hardware seamlessly slides into and secures with its oversized t-slot mount and allows you to put clamping pressure anywhere along the flush-mounted T-slot or T-track on Table saw.
  • PRECISION and COMPATIBILITY: Allows t-slot stops to be made quickly from both ¾” and 1-1/2” stock – Ideal for hold downs, glue ups and jig fixture assembly.
  • DIMENSIONS: Length 2-inch | Threaded 1/4”-20 | Isolation Mount Oval Shaped Head .971” long by .882” wide by .106” thickness.
Check Stock

1-1/2\ T-Slot Bolt

  • Built to last:Compared with mormal stainless steel,it's more antirust and corrosion-resistant.
  • Unlike standard bolts and screws, these threaded wood inserts T bolts will not strip easily or over tighten..
  • Easy to use: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
  • Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place..
  • Application:Widely used for aluminum alloy, rack assembly and clamping lock,T-slot track or wooden groove, but can also be used when building furniture, assembling sheds, decks, and cabinetry, or installing speakers or caster wheels..
Check Stock

Iverntech MGN12 300mm Linear Rail Guide with MGN12H Stainless Steel Carriage Block for Ender 3, Corexy, Tronxy, Delta Kossel 3D Printers Upgrades and CNC Machine

  • Package Includes: 22pcs 20mm corner brackets, 44pcs M5x10mm T-slot nuts, 44pcs M5x10mm flanged button head socket cap screws bolts, 50pcs flat washers and 50pcs lock washers..
  • 2020 Aluminum Corner Bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 Series Aluminum Profile Extrusion..
  • The angle bracket is used to reinforce right-angle corner joints of aluminum extrusion profiles, insert the two ends of the bracket into the groove of the profile, and tighten the screw to fix the two profiles..
  • T-Slot Aluminum Extrusion M5x10mm Hardware Slide In T-Nuts made from high quality carbon steel, surface is plated with nickel for good rust resistance and better performance high hardness and a long service life..
  • 304 stainless steel M5x10mm button head socket cap screws features anti-corrosion, rustless, high-hardnes. M5 flat washers and lock washers can be used to adjust the length..
Check Stock

Bed Deck Rails Cleat T Slot Nuts Fits Screws with 3/8'-16 Thread 4PCS,Stainless 3/8-16 X 1 Hex Head Bolts 4PCS,Tie Down Anchors Rings Trailers Hook Cargo Bolt 4PCS for Toyota Tundra & Toyota Tacoma

  • 100% QUALITY MATERIAL:T Slot Nuts are made from 100% 304 Stainless Steel for the best corrosion resistance available,protect the T-Slot Nuts from rust. Tapped through for 3/8"-16 threads for use with d-rings, racks, tie downs, custom cleats and more.Hex Head Bolts are made from 304 Stainless Steel.tie down anchors are made of quality steel and they are fully welded triangular rings, which make the bolts sturdy and work for a very long time..
  • WIDELY USED:Mount extra custom cleats,tie downs,d-rings,bike racks and more! With a 3/8"-16 fully tapped and threaded hole, the possibilities are endless as to what you can attach.The tie down anchors are heavy duty 1000 lb rings,for securing ratchet rope, cam buckle straps, bungees cords,they are ideal to add tie down points for a truck, trailer ,SUV,boat to carry heavy loads, and let you far away from cargo swing and noise..
  • EFFECTIVELY:These T-slot nuts are perfectly compatible with bed rails in both Toyota Tundra (TM) and Toyota Tacoma (TM), but also work with a variety of other pickup trucks with compatible bed rails.By threading a screw or bolt through the 13/32" diameter bolting hole( (that's between 3/8" and 7/16")..
  • PACKAGE INCLUDES:T Slot Nuts with 3/8"-16 Thread 4 PCS,3/8-16 X 1" Hex Head Bolts 4PCS,Tie D....
Check Stock

PZRT 2020 Series Aluminum Profile Connector Set, 20pcs Corner Bracket,40pcs T-Slot Nuts, 40pcs M5x8 mm Hex Socket Cap Screw Bolt for 6mm Slot Aluminum Profile Accessories

  • 2020 Series Aluminum Profile Connector Set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
  • Cast Aluminum Corner Bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 Series Aluminum Profile Extrusion.
  • T-Slot Aluminum Extrusion M5x10 mm Hardware Slide In T-Nuts made from high quality carbon steel Galvanized,surface is plated with nickel for good rust resistance and better performance high hardness and a long service life..
  • High Quality Carbon steel Hex Socket Button Head Bolts Screws Nuts Surface chrome finish Anti-corrosion,rustless,non-pollution and high-hardness.used widely in the home and office appliance, communication equipments, ship assembly and other machinery industry.
  • Package Content: 20pcs 20mm 90 Degree Solid Cast Aluminum Corner Bracket,40pcs Carbon Steel Galvanized M5 x 10mm T-slot Nuts, 40pcs Carbon steel M5x8 mm Hex Socket Cap Screw Bolt.
Check Stock

O'SKOOL 5 Star T-Track Knobs Kit 4-Pack with Star Threaded 1/4-20 Knobs, Bolts and Washers

  • INCLUDES: (4 ) Red 5star knobs 1/4”-20 UNC threaded knobs , (4 ) hex head bolts 1/4”UNC X 3 inch,(4 ) washers, (4 ) plastic washers.
  • Red knob kit with an ergonomic design for smooth handling and comfort . Stainless steel hex head bolt has pullout resistance and durability. Washers for your convenience，It is mainly used to reduce pressure and friction..
  • EASY TO USE : Tighten the knob, bolts, and washers arranged together to help secure and enhance your woodworking jig assemblies..
  • HOW TO USE : To use on your T-track, insert the head of a bolt into the track with a washer and align it with the threaded knob.
  • APPLICATION: This is for a retaining clip for use with a T-track slot, fixtures, and splint..
Check Stock