Reviews Suspension Strut Tool

Genuine GM 9597801 Hub Cap

  • Genuine Oem: Yes, Manufacturer Part Number: 9597801, Category 3: Covers & Trim, Part Ref# On Diagram: ONLY PART REFERENCE #1 ON THE DIAGRAM IS.
  • Warranty: 1 Year, Category 2: Wheels, Alternate Item Name: Suspension Strut Mount Tool, Quantity Needed: 1.
  • Brand: GM, Fitment Type: Direct Replacement, Item Name: Suspension Strut Mount Tool, Category 1: Front Suspension.
Check Stock

OEMTOOLS 27036 10.75 Inch MacPherson Strut Spring Compressor, Set of 2 Universal Spring Compressor Tool Automotive, 9.75 Inch Maximum Safe Opening, Carrying Case Included

  • ...strut spring removal tool the longest lasting on the market.
  • OTHER FEATURES INCLUDE: MacPherson Spring Compressor features heat-treated forcing screw and safety latches for locking hook to spring.
  • These spring compressors are thoughtfully designed to be safe to use.
  • AUTOMOTIVE SUSPENSION TOOLS: MacPherson struts are the most important element of many modern suspension systems and should be replaced, on average, every 50,000 to 80,000 miles.
  • These automotive tools from OEM TOOLS get the job done.
  • Broad spring contact and built in detent pins help to lock the spring into place for safer spring compression.
  • Hooks are forged and the center screw is hardened for long life.
  • Note: lubricate the threads of this tool with anti-seize compound to prolong the life of the center screw.
Check Stock

Suspension Strut Spreader Socket Tool Strut Knuckles Remover Shock Absorber Ram Dismantle Socket Compatible with Audi VW, compatible with Ford, compatible with BMW, compatible with Citroen (Pack of 2)

  • Must Have Tool for Remove Strut : It is quick and easy to remove and replace the strut unit in the front axle use this socket, when replaced the struts or shocks. and very easy to knock it out of the spread position, makes removal suspension strut much easier.
  • Easy To Use: With this spreader, it slides easily into place and effortlessly holds the knuckle apart so you can remove the old strut and pop the new one right in immediately without any struggle. use 1/2" ratchet connect spreader socket.
  • Not Damage Axle: No need to ever again sledge hammer away at the knuckle if you have this tool, eliminating any potential damage to the steering knuckle.
  • Fit Many Automotive: Include 5*8mm, 4.5*6.5mm different size two spreader socket , so this kit fit many car, fit VW Golf IV, compatible with Audi, compatible with Ford, compatible with BMW, compatible with Citroen, compatible with SKODA, Seat, Renault, Peugeot etc.
  • Durable: This suspension strut spreader socket made of high quality steel, high hardness and very strong, and we offer lifetime warranty, we will replace or refund, if our suspension strut socket have any quality problem.
Check Stock

5pcs Strut Nut Socket 18mm 19mm 21mm 22mm 24mm with 12 Point 1/2 Drive Suspension Strut Nut Socket Tool Easy Remove Strut Nuts

  • 【Specification】 18mm, 19mm, 21mm, 22mm, 24mm strut nut socket with 12 point design, 1/2" square drive slot, The length is 3.1 inches. Various size can meet many different vehicles..
  • 【Function】 Specially designed to remove and install the locking nut on front suspension strut when replace the units. Compact and simple design, easy to carry and use..
  • 【Easy to Use】The strut nut sockets with cut out design allows 90° hex key to hold the strut whilst tightened to correct torque with a torque wrench.These suspension strut sockets can withstand 65-75 N..
  • 【High Quality】Made of high hardened 4140 impact grade steel,with black oxide coating which is great strength, not ease bent, rust-resistance and durable to use..
  • 【Satisfaction Guarantee】If you're not 100% satisfied with this Tool , simply return it for a full refund in 30 days, guarantee with 12 months’ warranty..
Check Stock

8MILELAKE Heavy Duty Coil Spring Strut Compressor Tool Spring Compressor Remover Installer Suspension Tool

  • 【APPLICATION】this coil spring strut compressor tool is ideal for remove and install coil spring & strut. it works as a spring compressor for struts and other coil springs on most passenger and light vehicles..
  • 【DURABLE MATERIAL】the spring compressor remover made of forged steel, strong and durable, not easy to break..
  • 【DOUBLE ENDED JAWS】the spring compressor installer has double ended jaws with attachable security hooks for improving security and control..
  • 【EASY TO USE】the suspension spring compressor tool has easy operation, a great helper for mechanic..
  • 【SIZE】the tool length of the coil spring strut is 12 inches (300mm), the max opening is 10 inches (254mm). please note that the listing is for two compressor with accessories, the spring is not included..
Check Stock

ACDelco Professional PK097 Rear Air Suspension Hose Kit

  • ACDelco Professional Coil Spring Seat, designed to fit with ACDelco struts, attaches the suspension strut to the vehicle.
  • High quality suspension component which further increases the safety and comfort of your vehicle.
  • Allows for the replacement of individual worn out suspension components without having to replace the entire shock or strut assembly.
  • ACDelco Professional Suspension Components share a level of quality construction with the Professional Shocks and Struts, ensuring the same level of performance from the component parts and shock or strut assemblies.
  • Designed to fit with ACDelco shocks and struts for ease of installation and use.
Check Stock

Detroit Axle - Front Struts Lower Control Arms Tie Rods Sway Bar Links Replacement for Town & Country Dodge Grand Caravan w/o Nivomat Sus - 10pc Set

  • Replacement for 2008-2016 Town & Country (Except Nivomat Rear Suspension) - [2008-2018 Dodge Grand Caravan (Except Nivomat Rear Suspension)].
  • OEM Design Direct Fit - Ready to Install - No Special Tools Required! Remove and replace the complete Strut Assembly in one piece.
  • Detroit Axle Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation.
  • Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's....
Check Stock

Detroit Axle - Front - Both 2 Front Complete Strut & Spring Assembly with 2 Sway Bar End Links - Front - NOT FOR NIVOMAT SUSPENSION Replacement for 2008-2018 Town & Country& Dodge Grand Caravan

  • Replacement for 2008-2016 Town & Country - 2008-2019 Dodge Grand Caravan.
  • Complete Strut Assembly - Equipped with Strut, Coil, Spring & Mounts - Ready to Install.
  • Detroit Axle Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation.
  • Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's....
Check Stock

Detroit Axle - Front Struts w/Coil Springs + Rear Shocks Assemblies Replacement for Acura CSX Honda Civic Sedan - 4pc Set

  • Replacement for 2006-2010 Acura CSX - [2006-2011 Honda Civic (Sedan ONLY.
  • Kit Includes: 2x Front Strut & Coil Spring Assembiles + 2x Rear Shock Absorbers.
  • Detroit Axle Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation.
  • Detroit Axle Suspension components are ready to meet the rigorous demands of today's foreign and domestic passenger cars, trucks, and SUVs.
Check Stock

ATPEAM Macpherson Strut Spring Compressor 2pc Heavy Duty Coil Spring Compressor Strut Remover Installer Tool, 13/16in Socket 1/2in Drive

  • ... Vehicles: Align the hooks with the safety pins backed off, position both set of hooks, opposite each other, tighten the threaded rod with even pressure on both sides, then remove the fastener nut holding the cartridge. This heavy duty coil spring compressor repairs bent and damaged parts and performs the necessary suspension maintenance on the macPherson struts and springs found in most small and medium-sized cars.
  • Heavy-Duty: This heavy duty strut spring compressors is made of strong carbon steel, and black anodic oxidation coating to prevent rust and corrosion, high durability and corrosion resistance under even punishing use, constructed with forged hooks and center screw hardened for maximum strength and longevity, designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair.
  • Safe & Stable Grip: The wide end pieces lock on to your coil springs quickly and easily and keep a secure hold as you work, with locking pins offering additional security and precision, hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool, 11.5-inches threaded rods for 10-inches to 10.5-inches maximum opening to fit jaws to coils.
Check Stock

Detroit Axle - RWD Front Struts & Coil Spring + Rear Shock Absorbers Replacement for 300 Dodge Charger Magnum - 4pc Set

  • Replacement for 2005-2010 300 - [2006-2010 Dodge Charger (without police package)] - 2005-2008 Dodge Magnum.
  • Kit Includes: 2x Front Struts w/Coil Spring + 2x Rear Shock Absorbers.
  • Detroit Axle Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation.
Check Stock

Monroe Shocks & Struts Strut-Mate 63631 Strut Bumper and Bellows Kit

  • REPLACeS DAMAGED JOUNCE BUMPER OR BOOT -- Avoid premature strut failure by replacing missing or damaged strut components.
  • PROTECTS PISTON ROD -- Protects piston rod finish from rust and corrosion and helps reduce oil leakage.
  • KEEPS MOISTURE AND DIRT OUT -- Self-draining design eliminates retention of moisture and other unwanted debris.
  • ENHANCES STRUT LIFE -- Delivers protection from severe suspension movement to improve strut durability.
  • PERFECT PAIRING -- Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete....
Check Stock

Monroe Shocks & Struts Strut-Mate 63628 Strut Bumper and Bellows Kit

  • REPLACeS DAMAGED JOUNCE BUMPER OR BOOT -- Avoid premature strut failure by replacing missing or damaged strut components.
  • PROTECTS PISTON ROD -- Protects piston rod finish from rust and corrosion and helps reduce oil leakage.
  • KEEPS MOISTURE AND DIRT OUT -- Self-draining design eliminates retention of moisture and other unwanted debris.
  • ENHANCES STRUT LIFE -- Delivers protection from severe suspension movement to improve strut durability.
  • PERFECT PAIRING -- Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete....
Check Stock