16’ Wide Horizontal Garage Door Reinforcement U-Bar Strut Support Brace
- ... Not to worry this is common and not a problem. The included self tappers will drill holes in the strut to attach it to your stiles no matter their placement..
- Included is 2 - 8 foot door strut support braces, 1 Strut Support Brace Coupler, Assembly Hardware, and Mounting Hardware. Because it’s shipping length does not exceed 96” it can be shipped through standard shipping methods..
Check Stock10 Pack P3010 Channel Nut and 1/2 x 15/16 Bolt for All 1-5/8 Strut Channel Channel Steel Screws
- USE:For use with P1000, P5000, P5001, P5500, P5501 and All 1-5/8" or Taller Strut Channel , Fastening and mounting for Strut Channel..
- MATERIAL:Zinc-plated hexagon nuts - 1/2"-13 Bolt 1/2" x 15/16", standard size solid and strong..
- MOUNTING DESIGN:Snap-in design, more solid and easy to install..
- NOTE:Please confirm your size before purchase, if you have any questions about our products please contact us in time, we will find the most suitable solution for you..
- MORE PRODUCTS: Scroll down to the detail page to see more products for 1-5/8" strut channel.
Check StockReadylift 69-3490 2019 Silverado/Sierra 1500 4 Inch SST Lift Kit
- Max Lift: 3.0"F/1.0"R - Max Tire Dia: 35".
- E-coated finish on the strut extensions, rear blocks and U-bolts will last as long as your Toyota.
- Skid Plate Spacers provided to adjust the skid plate down when using differential drop brackets.
- Precision crafted upper strut extensions designed to position the strut in the same mounting angle position.
Check Stock
Dr.Acces Golf Cart Rear View Mirror with LED Turn Signal | Golf Cart Side Mirror with LED trun Signal Fits EZ-GO Club Car Yamaha etc Most Golf Cart
- Universal Side Mirror with LED Turn Signal including Installation instructions, 180° extra Adjustable wide panoramic.
- Installation Step 1:Find desired mounting location and mark with a marker. Drill 2 small 1/8” holes in strut for mounting hardware. Drill 1/4” hole for wire. Or run your wires down strut, secure wires using mounting ties..
- Installation Step 2:Using a wire snake feed wires in through strut and out the bottom..
- Installation Step 3: Loosen hardware to mount LED mirror Bracket using supplied hardware. Reattach mirror to bracket using hardware from and tighten at desired mirror location..
- Installation Step 4: a.Up-plug head-light. Use a multi meter to find power and ground for the blinker. This will supply power to the LED mirror. To do this engage blinker on turn signal, the pin that shows 12V flashing is your blinker 12V(+). b.Attach Red wire to the wire found on the harness that showed 12V(+) flashing in step 3 using a Splice Wire Connector and secure.Re-attach harness to Headlight and repeat steps 1-7 on opposite side..
Check StockCompetition Engineering C3310 10-Point Roll Cage Strut Kit Only (Main Hoop Kit Sold Separately)
- Strut Kit Only for 10 Point Roll Bar Main Hoops. Meets NHRA requirements for cars running 10.99 or quicker with modified firewalls and/or floorboards. Increases chassis rigidity for better reaction times.
- This Strut Kit consists of two door bars, two rear struts, six 6" x 6" x 1/8" steel mounting pads and twelve weld joint gussets. Manufactured from 1-5/8" x .134" wall mild steel tubing and all bends are mandrel formed on CNC equipment.
- Tube ends are notched for better fit and easier installation. Meets NHRA and IHRA requirements.
- Strut Kit comes complete with instructions to ensure a hassle-free installation. Welding is required..
Check StockReadylift 67-5443 TRD Pro Skid Plate Adapter Kit
- Max Lift: 4.0"F-2.0"R - Max Tire Size: 35".
- Not for use on 2015 Tundra TRD Pro w/ Bilstein shocks.
- Precison crafted upper strut extensions designed to position the strut in the same mounting angle position..
- Kit includes differential drop brackets which lowers the differential on 4WD models. This keeps the near factory CV angle specifications that Toyota built into these great trucks..
- New powdercoated sway bar frame mount spacers to keep your sway bar working properly..
Check StockReadyLift 69-5175 3"F / 1"R SST Lift Kit - Toyota Tundra TRD / SR5 / Rock Warrior
- Tundra Max Lift: 3.0"F/2.0"R - Max Tire Dia: 35".
- Skid Plate Spacers provided to adjust the skid plate down when using differential drop brackets.
- Precision crafted upper strut extensions designed to position the strut in the same mounting angle position.
Check StockReadyLift 69-5475 4.0'' SST Lift Kit Toyota Tundra Front with 2'' Rear with Upper Control Arms without Shocks
- Max Lift: 4.0"F-2.0"R - Max Tire Size: 35".
- Not for use on 2015 Tundra TRD Pro w/ Bilstein shocks.
- Precison crafted upper strut extensions designed to position the strut in the same mounting angle position..
- Kit includes differential drop brackets which lowers the differential on 4WD models. This keeps the near factory CV angle specifications that Toyota built into these great trucks..
- New powdercoated sway bar frame mount spacers to keep your sway bar working properly..
Check StockAbeicy 3/8-16 Strut Channel Nuts 10 Pack Thickened Standard Spring Nuts with Zinc Plated Use On Channel Struts
- The 3/8-16 strut channel nuts are zinc plated for corrosion and rust protection and are strong and durable..
- These standard spring nuts are commonly used in slotted steel struts for mounting, supporting and connecting..
- These support slot nuts are suitable for fixing accessories such as junction boxes or pipe clamps..
- Standard spring thread size 3/8"-16, 8mm thick, pack of 10..
- If you have any questions about our strut channel nuts, please contact us and we will give you a satisfactory answer..
Check Stock
OEMTOOLS 25553 MacPherson Strut Spring Compressor Heat-Treated Thread Rod Strut Compressors Coil Spring Compressor w/ Forged Hooks 9 Threaded Length Black
- EASY-TO-USE SPRING COMPRESSOR: Easily remove and replace MacPherson strut springs with the broad contact hooks on our coil spring compressor tool.
- Our 3/4” (19mm) hex head on the threaded rod is designed to be hand-torqued with a ratchet or wrench.
- SAFE STRUT SPRING COMPRESSION: Strut compression is dangerous work.
- Our strut compressor features detent pins that keeps the strut spring in place during compression.
- Add anti-seizing compound to the threaded rod before using MacPherson Strut Compressor.
- STRUT MAINTENANCE TOOL: Remove MacPherson strut springs quickly and easily so that you can make repairs to the strut assembly.
- Access bent struts, strut tubes, and strut cartridges safely thanks to the power of our near universal strut compressor.
- WON’T BEND DURING USE: Don’t rely on cheaper material to get a dangerous job done.
- Our durable heat-treated threaded rods on our strut coil spring compressor ensures a smooth compression of strut springs without bending the threaded rod.
- WORKS ON MOST VEHICLES: Features a threaded length of 9”, making it compatible with most vehicle’s MacPherson strut springs.
- Attach the threaded rods so that the hooks are set 180° apart.
- Evenly compress both sides of the strut spring compression tool.
Check StockThule Tour Rack - Bike Cargo Rack - Easy on Easy Off - Front and Rear Compatible
- Convenient light/reflector attachment point to keep you visible.
- Improved clearance due to raised strut mounting points.
- Rack remains secure under heavy loads with rubberized grips that prevent sliding and protect bicycle frame.
- Installation and removal is easy with convenient access to mounting system.
- Pedal comfortably with adjustable deck and rails that provide maximum heel clearance.
Check StockDEWALT 20V MAX* SDS Rotary Hammer Drill, Tool Only (DCH273B) , Yellow
- Cordless hammer drill has 2.1 Joules of impact energy for fast drilling in concrete..
- SHOCKS ACTIVE VIBRATION CONTROL System of DEWALT 20V hammer drill reduces vibration felt by the user at the handles, compared to rotary hammers without this feature..
- Lightweight design makes this DEWALT 20V brushless hammer drill ideal for rod hanging, seismic and safety attachments, cable tray and strut mounting, clamp mounting, and rail mounting..
- OSHA Table 1 Compliant when paired with DWH303DH On Board Extractor..
- Brushless motor and durable German-engineered mechanism for efficient performance and runtime..
- Rotating Dial to set tool to a specific applicaiton mode - Drill, Hammer Drill, or Chip..
Check StockDEWALT 20V SDS MAX Hammer Drill Cordless 5/8 in Tool Only DCH172B
- 1.4 Joules of impact energy for fast drilling in concrete.
- Lightweight design makes this tool ideal for rod hanging, concrete forming, cable tray and strut mounting, clip and bracket mounting, and railing....
- Brushless motor and durable German-engineered mechanism for efficient performance and runtime.
- SHOCKS ACTIVE VIBRATION CONTROL System reduces vibration felt by the user at the handles comparted to rotary hammers without this feature..
Check Stock
