Reviews Automotive Strut Tool

8MILELAKE Macpherson Strut Spring Compressor

  • This Macpherson Strut Spring Compressor designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair novice. compress the coil spring to replace the shock absorber unit or spring.
  • For repairs on bent struts, strut tubes, and damaged pieces.
  • Using a 3/4"or 19mm socket and ratchet turn the main shaft compressing the strut spring enough to safely remove the fastener nut holding the cartridge. Wide compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut.
  • threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression.
  • it allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools.
  • The 8MILELAKE Macpherson Strut Spring Compressor constructed with forged hooks and center screw hardened for maximum strength and longevity.
  • A plastic carry case is included. easy to organize and carry the tool.
Check Stock

Suspension Strut Spreader Socket Tool Strut Knuckles Remover Shock Absorber Ram Dismantle Socket Compatible with Audi VW, compatible with Ford, compatible with BMW, compatible with Citroen (Pack of 2)

  • Must Have Tool for Remove Strut : It is quick and easy to remove and replace the strut unit in the front axle use this socket, when replaced the struts or shocks. and very easy to knock it out of the spread position, makes removal suspension strut much easier.
  • Easy To Use: With this spreader, it slides easily into place and effortlessly holds the knuckle apart so you can remove the old strut and pop the new one right in immediately without any struggle. use 1/2" ratchet connect spreader socket.
  • Not Damage Axle: No need to ever again sledge hammer away at the knuckle if you have this tool, eliminating any potential damage to the steering knuckle.
  • Fit Many Automotive: Include 5*8mm, 4.5*6.5mm different size two spreader socket , so this kit fit many car, fit VW Golf IV, compatible with Audi, compatible with Ford, compatible with BMW, compatible with Citroen, compatible with SKODA, Seat, Renault, Peugeot etc.
  • Durable: This suspension strut spreader socket made of high quality steel, high hardness and very strong, and we offer lifetime warranty, we will replace or refund, if our suspension strut socket have any quality problem.
Check Stock

Motormite 21148 Drum Brake Bar

  • Direct replacement - this parking brake strut blade is designed to match the fit and function of the original part on specified vehicles.
  • Ideal solution - this strut is a reliable replacement for an original part that is missing or damaged.
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

SCITOO 2Pcs Macpherson Strut Spring Compressor Tool 11.5\ fit for 13/16\ Socket 1/2\ Drive

  • ...table for both professional mechanic and beginner use..
  • 【LOCKED FIRMLY】 The SCITOO threaded rod has a wide spring contact surface and a built-in positioning pin, which can lock the coil spring in place to ensure safer compression of the spring..
  • 【1 YEAR WARRANTY】 We provide 1 year warranty for you. When doing automotive maintenance always make sure all the tools are correctly used and wear glasses and gloves . Any question or problem, feel free to contact us..
Check Stock

OMT Spring Compressor 11-1/2 Macpherson Strut Spring Compressor 13/16 Socket 1/2 Drive to Compress The Coil Spring Set of 2

  • ...5-inches maximum opening to fit jaws to coils (Wide jaws with standard diameter of approximately 6 inches OD front coil springs)..
  • Constructed with forged hooks and center screw hardened for maximum strength and longevity, designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair novice..
  • 1-YEAR WARRANTY: Orion Motor Tech backs these spring compressors with a generous 1-year warranty as well as our usual friendly 24/7 customer service, ensuring that you'll enjoy their use for years to come!.
Check Stock

ATPEAM Macpherson Strut Spring Compressor 2pc Heavy Duty Coil Spring Compressor Strut Remover Installer Tool, 13/16in Socket 1/2in Drive

  • ... black anodic oxidation coating to prevent rust and corrosion, high durability and corrosion resistance under even punishing use, constructed with forged hooks and center screw hardened for maximum strength and longevity, designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair.
  • Safe & Stable Grip: The wide end pieces lock on to your coil springs quickly and easily and keep a secure hold as you work, with locking pins offering additional security and precision, hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool, 11.5-inches threaded rods for 10-inches to 10.5-inches maximum opening to fit jaws to coils.
  • Contents: 2pcs 10.5 inch range coil strut spring compressor with safty locking pins, 1 pc. high quality storage case.
  • Storage Case: The strut spring compressors is packed in a heavy-duty storage case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..
Check Stock

OEMTOOLS 25553 MacPherson Strut Spring Compressor Heat-Treated Thread Rod Strut Compressors Coil Spring Compressor w/ Forged Hooks 9 Threaded Length Black

  • EASY-TO-USE SPRING COMPRESSOR: Easily remove and replace MacPherson strut springs with the broad contact hooks on our coil spring compressor tool.
  • Our 3/4” (19mm) hex head on the threaded rod is designed to be hand-torqued with a ratchet or wrench.
  • SAFE STRUT SPRING COMPRESSION: Strut compression is dangerous work.
  • Our strut compressor features detent pins that keeps the strut spring in place during compression.
  • Add anti-seizing compound to the threaded rod before using MacPherson Strut Compressor.
  • STRUT MAINTENANCE TOOL: Remove MacPherson strut springs quickly and easily so that you can make repairs to the strut assembly.
  • Access bent struts, strut tubes, and strut cartridges safely thanks to the power of our near universal strut compressor.
  • WON’T BEND DURING USE: Don’t rely on cheaper material to get a dangerous job done.
  • Our durable heat-treated threaded rods on our strut coil spring compressor ensures a smooth compression of strut springs without bending the threaded rod.
  • WORKS ON MOST VEHICLES: Features a threaded length of 9”, making it compatible with most vehicle’s MacPherson strut springs.
  • Attach the threaded rods so that the hooks are set 180° apart.
  • Evenly compress both sides of the strut spring compression tool.
Check Stock

ATLIN Strut Spreader Tool – Strut Socket for Audi, VW, BMW, Mini, Ford

  • Compatibility – The ATLIN strut spreader is designed to fit any vehicle equipped with a pinch bolt style hub which is commonly found on Volkswagen, Audi, BMW, MINI, Ford vehicles. Some compatible models include the 2005+ VW Golf GTI, Jetta, and Passat.
  • Superior Design – Audi and VW spindle housings may require a significant torque to spread apart. Unlike other brands, the ATLIN strut removal tool features an oval shaped head. This design makes it easier to rotate the strut tool in the strut channel.
  • Low Profile – Most strut socket tools are difficult to use due to their length. The ATLIN strut spreader tool was designed to be as low profile as possible, allowing it to fit in tight spaces, thus making your job much easier.
  • High Quality – Crafted from hardened S2 tool steel, a material used in premium tools and known for its extreme toughness, this spreader socket will not yield under high torque applications.
  • Size & Materials – 1/2” drive, pry bit measures 5.5x8.2mm, S2 tool steel, chrome vanadium (CR-V).
Check Stock

Shankly Spring Compressor Tool - Heavy Duty Build, Ultra-Rugged Coil Spring Compressor Tool or Strut Spring Compressor Strong and Durable ATV Spring Compressor Tool

  • ✅ RUGGED AND STURDY FRAME: Shankly’s heavy duty spring compressor tool automotive for struts and coil springs reduce tool flexing, bending, and warping, and providing confidence to the mechanic, a professional job performance for a professional mechanic and automotive.
  • ✅ SUITABLE FOR LARGE CARS AND TRUCKS: Many coil spring compressor tools slip and buckle under high tension, Shankly’s heavy duty spring compressor tool bears 1000 kg maximum capacity per pair. These coil spring compressors are usable for almost any vehicle make including large cars and trucks.
  • ✅ STRONG AND SECURE HOOKS: Avoid strut compressors with flimsy hooks creating slippage and other safety problems. Shankly’s coil compressor hooks grip springs tightly by turning easy-to-use hex nuts. Constructed with durable hooks and hardened for maximum strength and longevity.
  • ✅ MULTIFUNCTION COMPRESSOR TOOL: Wide jaw capacity (23 mm - 280 mm) makes Shankly's coil spring compressor tool ideal for a range of vehicles, assisting the mechanic with years of compression jobs. Ideal for any cars or motorcycle coil spring compressor.
  • ✅ SAFETY INFORMATION: Coil spring tool work can be dangerous. GREASE THREADS WELL TO PRESERVE THREADS AND AVOID STRIPPING. DO NOT USE AN IMPACT GUN TO TIGHTEN....
Check Stock

Shankly Spring Compressor Tool - Heavy Duty Build, Ultra-Rugged Coil Spring Compressor Tool or Strut Spring Compressor Strong and Durable ATV Spring Compressor Tool

  • ✅ RUGGED AND STURDY FRAME: Shankly’s heavy duty spring compressor tool automotive for struts and coil springs reduce tool flexing, bending, and warping, and providing confidence to the mechanic, a professional job performance for a professional mechanic and automotive.
  • ✅ SUITABLE FOR LARGE CARS AND TRUCKS: Many coil spring compressor tools slip and buckle under high tension, Shankly’s heavy duty spring compressor tool bears 1000 kg maximum capacity per pair. These coil spring compressors are usable for almost any vehicle make including large cars and trucks..
  • ✅ STRONG AND SECURE HOOKS: Avoid strut compressors with flimsy hooks creating slippage and other safety problems. Shankly’s coil compressor hooks grip springs tightly by turning easy-to-use hex nuts. Constructed with durable hooks and hardened for maximum strength and longevity.
  • ✅ MULTIFUNCTION COMPRESSOR TOOL: Wide jaw capacity (23 mm - 280 mm) makes Shankly's coil spring compressor tool ideal for a range of vehicles, assisting the mechanic with years of compression jobs. Ideal for any cars or motorcycle coil spring compressor.
  • ✅ SAFETY INFORMATION: Coil spring tool work can be dangerous. GREASE THREADS WELL TO PRESERVE THREADS AND AVOID STRIPPING. DO NOT USE AN IMPACT GUN TO TIGHTE....
Check Stock

BILITOOLS Strut Spreader Tool 2 Piece Suspension Tool Compatible with VW Audi BMW Mini Ford Renault ect.

  • Comes with strut spreader tool with 5.5 x 8 mm and 5 x 7 mm. 1/2" Drive.
  • 2 piece strut spreader is designed to expand the spring strut and ball joint mounting to separate the spring strut from the wheel bearing housing..
  • The strut spreader sockets are made with S2 steel for maximum strength and durability, and to resist rotational distortion..
  • The strut spreader sockets are featured an oval shaped head. This design makes it easier to rotate the strut tool in the strut channel..
  • Compatible with Audi, BMW, Citroen, Ford, Peugeot, Renault, Seat, Skoda, VW and Japanese vehicles.
Check Stock

Toolwiz Universal Adjustable Magnetic Gauge Tool Camber Castor Strut Wheel Alignment Tools for Car Truck RV Tire Repair Caster Alignment Castor Wheel Gauge Camber Alignment Tools Camber Gauge

  • Universal automotive tool for wheel alignment, caster camber gauge compatible with BMW, Benz, Chevrolet, Toyota, Honda, Jeep, Citroen..
  • This Wheel Alignment Balancing Tools allows you to return the strut to the original camber position after dismantling and re-assembling the suspension....
  • The alignment gauge is suitable for accurate checking of the castor and camber angle. Measures the camber and caster angle on the wheel hub or brake....
  • With it's strong magnetic attraction, the camber alignment tool can easily attached on all kind metal surfaces..
  • Alignment tools automotive: Easy to read through accurate scale with range of measurement from -5 up to +5 degrees. You can ask seller for sending....
Check Stock

UTMALL Suspension Strut Spreader Tool Mechanical Spreader Car Shock Absorber Ram Strut Remover External Hexagon 17MM

  • This suspension strut spreader tool separates the suspension strut from the wheel bearing seat by being stuck in the gap, and only needs to rotate the outer hex to separate it, which is easy to operate..
  • The extension range of this Suspension Strut Spreader Tool is: 5.1-11.4MM, suitable for most models, with a wide range of applications, compatible with Audi, VW, BMW, etc..
  • It not only can quickly separate the suspension strut from the wheel bearing seat for easy removal and adjustment, but also saves time & effort, saves the time of the repairman, and improves work efficiency..
  • The suspension strut spreader tool is output through the parallel pressure surface and spreads smoothly, which can effectively prevent the tool from accidentally jumping out or slipping off, and protect the suspension strut and wheel bearing..
  • Designed for disassembly and assembly of extended suspension struts and ball joints, external hexagon rotation design, built-in booster drive, can smoothly separate suspension struts and ball joints..
Check Stock